BAILEIGH Long Bed Parallelogram Jointer with Helical Cutter Head IJ-1288P-H
CALL FOR AVAILABILITY AND BEST PRICING!
Our largest jointer, the IJ-1288P-HH makes your shop safer, thanks to its parallelogram design. The 12” width and 5 hp motor open possibilities by letting you tackle big pieces of lumber.
Runs on 220-volt single-phase power, so it will work almost anywhere.
Straight 4-row spiral cutter head (4” diameter) spins at 5,500 rpm.
Extra-long 88” bed offers better work support for large pieces.
Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining.
6” x 47” fence tilts in and out with stops at 90° and 45° for edge joining.
Non-mar insert in the fence prevents the table from scratching the surface during adjustments.
Parallelogram-style table stays close to the cutter and maintains a narrow, consistent gap, regardless of the cut depth.
With a parallelogram jointer, your shop is less prone to dangerous accidents. You’re less likely to slip a board—or a hand—into the gap!
This design also improves your finished product and lets you adjust the depth of cut more quickly.
Table remains perfectly parallel, even after years of use.
Convenient handwheel lets you adjust the cut depth up to ⅛”.
Digital read out for depth of cut, makes repeating cuts easy.
6” dust port connects to your dust collection system for a cleaner work area and more breathable air.
Covered by a 1-year parts warranty.
We stock most replacement parts at our Wisconsin headquarters for fast shipping.
You can count on lifetime technical support by phone from our team experienced woodworkers.
Dust Collection Port: 6"
Table Size (Length): 88"
Table Size (Width): 12"
Fence Size: 6" x 47"
Fence Tilt: Yes
Table Tilt (degrees): 45º
Maximum Rabbeting Capacity: 3/4"
Cutter Head Diameter: 4"
Max Stock Width: 12"
Jointer Maximum Cutting Depth: 1/8"
Power: 220V Single Phase
Horse Power: 5
Rabbet Ledge: 3" x 13-3/4"
Number of Inserts: 56
Insert Rows: 4
Weight: 880 lbs.
Shipping Weight: 900 lbs.
Shipping Dimensions: 96" x 44" x 52"
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida