buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Machining Centers - CNC > Horizontal - Vertical Machining Centers CNC    < Back

CNC Knee Mill (2 Axis) With Centroid Control - $22,500

Item Number: #00142621
CNC Knee Mill (2 Axis) With Centroid Control

CNC Knee Mill (2 Axis) With Centroid Control
Price: $22,500
Subcategory: 

Horizontal - Vertical Machining Centers CNC

Manufacturer:  Atrump-Remedy
Model:  K3 2 axis
Condition: New

ECEDM & Remedy Machine Sales, LLC Ed Tremblay 215-540-0404
Email: [email protected] Website: Remedymills.com

NEW Remedy Model 3VK: 2 Axis CNC Knee Mill w/manual Quill w/DRO feedback
Machine Package:
3VK NMTB-30 - 2 Axis CNC Knee Mill with Centroid M-400 CNC Control…....... $ 23,875.00
Quill-DRO .. Quill DRO with feedback to the Centroid CNC control….............. $ 1,450.00
Electric automatic CNC Smart machine Oiler w/low oil alarm……………………. $ Standard
Work Lamp, Water Tight Limit Switch Set (Both Plus and Minus directions)…… $ Standard
Programmable flood Coolant System…………………………………………..............……. $ Standard
Shipping La to PA ................................................................................. $ 2,250.00
Base Machine Total Value ……… $ 27,575.00
Machine Special…. $ 22,500.00

STANDARD MACHINE FEATURES
Centroid M400 2 Axis CNC control w/Industrial PC
Manual quill w/Z Axis DRO feedback to the CNC Control
Z Axis moves are prompted by the CNC Control to the operator
3 HP Spindle Motor, 30 Spindle Taper
Programmable 5,000 RPM spindle with HI-LO gears
Tilt - Swivel head and a Movable Ram
Hardened & Ground with Turcite-B coating ways
Precision 1 ¼” Ground ball screws for longer life and high accuracy
FC30 Meehanite Casting main frame, annealed & stress relieved for long term reliability
Anti-rust Chrome Plated Quill ( 30 taper Spindle )
Box ways design on Y axis to provide maximum rigidity & stability
Standard rubber way covers on the Y axis ( front and rear )
Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002
16” Knee Travel (optional power assist knee )
Automatic lubrication system with Low Lube alarm 
MPG 100 step handwheel (Optional)
Toolbox, schematic set and Manual set
Upgradable to a 3 axis CNC System in the future (other machines are not !)

Specifications:
Table Size: ……………........ 10” x 54”
Longitudinal travel (X-axis): 31” Cross travel(Y-axis): …………. 14 1/2”
Z axis travel CNC quill:........ 4.78 Knee travel (manual): ………… 16.0”
Ram Travel............................ 20.0” Quill diameter: ......................... 3.375”
Spindle nose to table top … 0.75”-16.75” Load capacity: ......................... 600 lb.
Lower Chip Pan is Standard equipment Spindle center to column front: 6.875-23.50”
Spindle taper: …………….. 30 Taper
Spindle Speed (rpm): 70 to 5000 rpm with Hi/Lo gear (Backgear Auto reverse inverter)
Delta AC Servo Motors (XY) Closed Loop @ 135 IPM

Head:
Manual Z Mode…….. Swivel (left/right): 90 degree Head Tilts/swivels and Ram extends
Tilt (front/back): 45 degree
Motor:
Spindle motor/max torque:...... 3 HP……. 4 KVA, 18 amps
Coolant pump (optional)......... 1/8 HP
Lubrication pump:…… Automatic with Low Lube warning beeper
Power requirement: .................... 3 Phase 208-230 voltage
Width x Depth x Height (WxDxH): 105” x 100” x 97”
Machine weight………………… 3,100 lbs.

Table Work-holding options:…………. Kurt - System 3R
Spindle Tooling Packages: …………… 30 Taper collet Standard inch size holders

CNC Control Centroid M400
Windows based, industrial PC. Powerful and VERY Easy to use Conversational control. Fanuc
compatible G-Code control, 6 Gig Solid state memory and multiple USB ports with network capability. A Large 15” color LCD Screen with Color 2D and 3D graphics, a machining time estimator and much more. See the Control data sheet for much more information on the Centroid M400 Control.

Standard Accessories:
Centroid Control Coolant system Ready Shop floor programming/Conversational
Operation manual set Auto lube system Industrial PC
Manual Z has Centroid Z movement prompt

Options:
PDB-MAX Maxi-Torque Power Draw Bar installed (Installed).................... $ 895.00
TCG Table Chip Guard Knee Mill with 2 doors........................................... $ 925.00
CHIP-A1 Lower Chip Pan for the base.................................................... $ 250.00
Intercon off-line conversational program (for your desktop PC) 10730 $ 850.00
In-House training (2) 5 hour days Non-ATC ........................ NAT-ATC ....... $ 1,850.

Terms: Payment due before shipment
Warranty: 6 months

Contact Seller

This machine is listed for sale by ECEDM & Remedy Machine Sales, LLC located in Levittown, Pennsylvania

Contact the Seller
 
ECEDM & Remedy Machine Sales, LLC
  2 Sunflower Rd
Levittown
PA 19056
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details