BAILEIGH Hydraulic H-Frame Press HSP-110M-HD
H - Frame Presses
CALL FOR BEST PRICING!
With a 1” plate steel framework and plenty of time-saving features, this hydraulic press sets the standard by which all other models should be measured.
42.12” working width.
8.66” diameter cylinder with 11.8” stroke.
Runs on 220-volt 3-phase power.
7.5 hp motor can push all 110 tons of force without strain.
cylinder moves left or right within the framework so you can apply force for off-center projects.
2-speed down movement (rapid or slow descent) with pressure regulator.
6.3” chrome piston automatically returns to top position after the job is done.
Welded steel construction maintains accuracy, holding up under the machine’s full force without flexing.
Baileigh backs this hydraulic shop press with a 1-year parts warranty.
Our experienced team of reps will also provide lifetime technical support by phone.
Recommended for: General assembly, straightening work, and pressing bearings in and out of their housings.
Return Speed: .393" / sec.
Maximum Pressure: 3858 psi
Piston Head Diameter: 4.72"
Pump Speed: 1.5 / 5.17 gal/min.
Oil Capacity: 7.92 gal
Working Speed: .106" / sec.
Working Width: 36.22"
System Oil Capacity: 3.17 gal
Lowering Speed: .362" / sec.
Maximum Capacity: 110 Tons
Cylinder Stroke: 15.75"
Cylinder Movable: Yes
Cylinder Diameter: 10"
Motor: 7.5 HP
Power Requirement: 220V / 3 phase
Shipping Dimensions (L/W/H): 67" / 37” / 84”
Shipping Weight: 3,400 lbs
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida