U.S. INDUSTRIAL Precision Geared Head Engine Lathe USL2080BH-KIT
Gap Lathes - Sliding Bed
CALL FOR AVAILABILITY AND BEST PRICING!
This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.
As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, 4-way rapid travel, work lamp, a coolant system and an operator/service manual.
12” 3-jaw chuck. Universal, self-centering with an American standard tongue and groove top Jaws.
16” 4-jaw independent chuck
Flood coolant system
Sino 2-axis digital readout inch/metric (installed)
Inch reading dials on Apron, Cross-Slide and compound
Manual with test certificate
25” Face Plate & Dog Plate
Foot brake with microswitch and brake
4-way rapid travel
Safety chuck shield
Taper attachment (installed)
Large spindle bore to pass 4”
Full length backsplash
Slide out chip pans
Note: Free Multi-position carriage stop
Swing Over Bed: 19.7” (500mm)
Swing Over Cross Slide: 11.8” (300mm)
Swing Over Gap: 28” (710mm)
Gap Length: 9.44” (240mm)
Maximum Workpiece Length with 3-jaw chuck: 78.74” (2000mm)
Maximum Turning Length: 76.77” (1950mm)
Spindle Bore: 4.134” (105mm)
Spindle Type: D1-8 Camlock
12 Spindle Speeds: 36 to 1600 RPM
65 Longitudinal Feeds: .0023 to .0937 IPR
65 Cross Feeds: .0011 to .0404 IPR
22 Metric Threads: 1 to 14mm
27 Inch Threads: 2 to 28 TPI
18 Module Threads: 0.5 to 7mm
24 Diametral Pitch Threads: 4 to 56 DP
Compound Rest Travel: 5.75"
Cross-Slide Travel: 12.125"
Tailstock Taper: No. 5 Morse Taper
Tailstock Spindle Travel: 5.906” (150mm)
Tailstock Spindle Diameter: 2.953” (75mm)
Main Motor HP: 10 HP (7.5 kw) 220V or 440V, 3-phase
Rapid Feed Motor: 0.4 HP
Coolant Pump Motor: .16 HP, 11 gallons per minute
Lathe Gross Weight: 6,500 lbs.
Dimensions: 147” long, 40” wide, 50” tall
Quick change toolpost kit with holders
ISO Cutting Tool Package
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida