IRM 9’ Quick Quench Strip Annealing Furnace - Double Mufflers and Recoilers
Furnaces - Annealing Strip
The furnace is an electrically heated, continuous strip-annealing unit with an angular hearth and water quench tank. Includes a recoiler and a built in dissociator.
Width of Combination Unit: 36” Wide
Length of Unit: Approx. 22’ including Quench Tank
Height of Unit: 48” High
Double Muffle Design Specifications:
· ¼” thick Enkonel diamond shape muffles.
· Work space 3 ½” wide by 3” high at the muffle center.
· Muffle is of all Tig welded design and extends through the furnace entrance.
· Sealed atmosphere box.
· Extends through the furnace exit and enters the water quench tank.
· Graphite liner to prevent scratching during annealing.
Heat Zone Dimensions: 8” Wide x 3” High x 108” Long
Kilowatt Rating of Furnace: 220V; 3-Phase; 60 Hz; 80 Line Amps +/-20%
Furnace Direction: Material feeds left and exits right.
Temperature Control: There are two Watlow Series 965 1/16 Din Microprocessor based auto-tuning controls. This divides the heat zone into two zones.
Each zone are monitored for oven temperature by two Series 365 1/16 Din temperature limit controls. All controls are calibrated for type (K)
Cooling Quench Tank: Made of stainless steel material. There is a 4” diameter polymer drum for guiding the strip stock through the water tank.
Cooling Quench Tank Dimensions: 48” Long x 22” Wide x 20” High
Panel Board: Equipped with all necessary switches and controls for efficient operation.
Drive System: Pinch roll variable speed (0-12 Feet per minute) drive with slip clutches.
Recoiler Specifications: Two 36” OD x 6” Wide, 2000 LBS Capacity Recoilers
This machine is listed for sale by International Rolling Mills
located in Pawtucket, Rhode Island