MAXimum TF850-FP
Programmable Automatic Top & Face Grinder |
|
Price: | $RFQ |
Subcategory: | Face Grinders |
Manufacturer: |
Maximum |
Model: |
TF850-FP |
Condition: | New |
CNC Programmable
Features:
Freely programmable micro processor for custom tool geometries
Freely programmable tooth pitch
Totally enclosed cabin with end of cycle indicator
Specially balanced 2 HP grinding motor
Height sensor with shut off
Dual pressure saw clamp with swing away arm
Automatic central lubricating system
Lift-Off face grinding
Load Monitor shuts machine down extending machine life
Up to 1000 blade programs possible
Remote diagnostic modem
(Allows for remote troubleshooting & uploading of programs)
Standard Machine Includes:
10 GPM flood coolant system with filter paper
Precision saw lift
Stainless steel shields
Dual low voltage machine lamps
Tooth Counter
Magnetic saw receiver for saw blades with bore sizes (0.5-1.5”)
Set of saw bushings (1/2, 5/8, 3/4, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2”, 30mm)
MACHINE SPECIFICATIONS
Blade Diameters 4 – 34 inch (2 – 40” Option)
Grinding Motor 2 HP
Maximum blade thickness .75 inch
Grinding Wheel Specs 6” x 1-1/4”
Pneumatic requirements 100 PSI, 2 CFM
Voltage 230/460V, 3Ph, 60Hz
Weight 1900 lbs
TF850-FP Optional Accessories for Tool Holding
Automatic Saw Plate Thickness Adjustment
Oil Coolant Package
Cartridge Filtration System -To 5 micron, 15 GPM, includes 2 cartridges & installation kit
Replacement Cartridges Available in 20 Micron and 5 Micron -2 required
Mist extraction system for use with Oil coolants, Double Centrifuge Collector with air filter
30 gallon Coolant Tank++ Standard tank is 15 gallon
HEPA clip on filter for smoke elimination++
Automatic CO2 Fire Suppression System
Custom designed Pyrogen fire suppression unit for oil coolants++
System uses sensor to automatically dispense CO2 in case of fire or extensive heat. Carbon Dioxide is a clean, dry, non-corrosive, inert gas, which does not damage machine parts.
Tool Holding
Saw bushings (0.5-1.5” 12-38mm)
Mag Saw receiver (for bore sizes 1.6-4.0”, 39-101mm)
Mag saw receiver (4.1-8”, 102-203mm)
Saw bushings (1.6-3”, 39-76mm)
Saw bushings (3.1-5”, 77-127mm)
Saw bushings (5.1-8”, 128-203mm)
Saw receiver (for saw blade diameters 2-5”)
RECOMMENDED GRINDING WHEELS
6” Diamond Wheel-Top 6A9 180/400 grit C09006-02
6” Diamond Wheel-Top 6A9 220/600 grit C09002-01
6” Diamond Wheel-Face 4A2P 180 grit C06033-02
6” Diamond Wheel-Face 4A2P 400grit C06049-01
Paper filters 10 pieces 180/400 grit L-5825
++ Recommended, but not required.
This machine is listed for sale by Colonial Saw, Inc.
located in Kingston, Massachusetts