CALL 386-304-3720 FOR AVAILABILITY AND BEST PRICING!

FEATURES:
This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.
As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, work lamp, a coolant system and an operator/service manual
Spindle bore will pass 3”.

STANDARD EQUIPMENT:
10" 3-Jaw Chuck . Universal, Self-centering
12" 4-Jaw Chuck independent chuck
15" Face Plate
Dog plate
Full length backsplash
Flood Coolant system
Work lamp
Follow Rest
Steady Rest
Thread Dial
Micrometer carriage stop
4-way toolpost
Foot brake with microswitch and brake
Safety chuck shield
Taper attachment - installed (USL 1660 CX-KIT)
Sino 2-axis digital readout inch/metric - installed (USL 1660 CX-KIT)
Large spindle bore to pass 3"
Slide out chip pan
Manual with test certificate
Inch/Metric reading dials on apron, cross-slide and compound

SPECIFICATIONS:
Swing over bedways: 16.53"
Swing over cross slide: 8.85"
Swing over gap: 21.65"
Distance between centers: 59.05"
Spindle bore: 3.15"
Spindle speeds range - RPM: 24 to 1600
Longitudinal feed range - IPR: .0027 to .150
Cross feed range - IPR: .00135 to .075
Metric Threading range: .5 to 28mm
Inch Threading range -TPI: 1 to 56
Tailstock taper: No. 5 MT
Spindle power: 10 HP
Power requirement: 220/440V, 3ph
3-jaw chuck - diameter: 10"
4-jaw chuck - diameter: 12"
Faceplate - diameter: 15"
4-way toolpost is included: <1" square
Sino 2-axis digital readout: Included
Steady rest: Included
Follow rest: Included
Micrometer carriage stop: Included
Thread dial: Included
Work lamp: Included
Taper attachment: Included
Rear splash guard: Included
Chuck guard: Included
Flood coolant system: Included
Slide out chip trays: Included
Crated Dimensions- LxWxH: 120" x 48" x 60"
Gross Weight: 4,400 lbs.

OPTIONAL ITEMS:
Quick Change Toolpost Kit with Holder
Iscar Cutting Tool Package

QUICK CHANGE TOOL POST OPTION – (Replaces standard four-way tool post)
ONE – NEW QUICK CHANGE TOOLPOST WITH FIVE HOLDERS, FOR FACTORY ONLY. INSTALL ON USL SERIES LATHES
Note: We use the wedge style, #333 for our Lathes. This comes with
Part off holder, knurling holder, boring bar holder, and two ¾” SS holders
This is custom installation and not available after machine ships.
Must be installed on lathe at time of order, prior to shipping.
Extra holders are $ 75.00 each.
Cutting Tool Package for U.S. Industrial Lathes:
This optional cutting tool package is designed to fit our QUICK CHANGE TOOLPOST option. It is not for the standard 4-way toolpost.
Tools included below are for:
Rough and medium finishing of the part OD
Left- and right-hand tools for working left and right hand shoulders
Tools for threading OD and ID
Part off tools
Fine finish of the part ID
Tools for boring the ID and more...
List of carbide cutting tools in KIT for US INDUSTRIAL LATHE: (ISO tools are imports.)
Note: Tools for 13”, 16”, 20” and 26” Lathes will be ¾” square shank
Note: Customer MUST purchase option, OUR QC Toolpost set for install prior to shipping:
MW LN-R, ¾” square, triangle insert, right hand
MW LN-L, ¾” square, triangle insert, left hand.
Box of 10 W NMG inserts for above
MCLN-R, ¾” square, diamond insert, right hand
MCLN-L, ¾” square, diamond insert, left hand
Box of 10 CNMG inserts for above
MVJN-R, ¾” square, diamond insert, fine finish, right hand
MVJN-L, ¾” square, diamond insert, fine finish, left hand
Box of 10 VNMG inserts, 1/64” nose radius
SER-0750-SET, ¾” square, for threading OD, with inserts (This is a KIT and includes threading inserts.)
SIR-0750-SET, ¾” round, for threading ID, with inserts (This is a KIT and includes threading inserts.)
SCLCR-SET, Boring bars, .315”, 3/8”, ½”, 5/8”, ¾” bars, with inserts (This is a KIT and includes inserts.)
RH-MCLN, Boring bar, 1” diameter, 12” long
Use inserts in Item No. 6, CNMG
HSSBlade for part-off holder, high speed steel
Block, blade and 10 self-lock carbide parting/grooving inserts
Arbor and key chuck for tailstock
Live center for

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida