Category
Lathes, Shaft Type
Manufacturer
LeBlond
Model
50/30 Raised 4625 NK Tape Turn I – Flat Bed
Serial Number
2NK506
Year
Rebuilt 2000
Control
Fanuc 18it CNC
Swing Over Bed
50.00 in, 1270.00 mm
Swing Over Cross Slide
33.00 in, 838.20 mm
Distance Between Centers
180.00 in, 4572.00 mm
X – Cross Slide Travel
28.00 in, 711.20 mm
Chuck Diameter
28 in (711 mm), manual, independant
Chuck Type
4-Jaw integral with bolt-on hard jaws
Spindle Bore
3.06 in, 77.777 mm
Spindle Power
75.00 HP 56.25 Kw
Spindle Speed
3 – 670 RPM infinitely variable
Spindle Nose
L3
Tailstock
Non-programmable with #6 Morse Taper
Tailstock Quill Diameter
8.00 in, 203.20 mm / 18.00 in, 457.20 mm Travel
Weight Capacity Between Centers
At 500 RPM 40000 lbs (18180 Kg)
At 100 RPM 32560 lbs (14800 Kg)
At 500 RPM 20020 lbs (9100 Kg)
Power
Existing
Additional
Press-in center-in chuck, feedrate range .1 to 150 inches per
minute, tailstock quill travel 18 in (457.2 mm), carriage length on
ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick
change slide tool holder, ways re-ground.
Condition
Excellent

This machine is listed for sale by Hadanich Machine located in Washington, Pennsylvania