11.8" X 13.4" TSCHUDIN "SWISS" SUPER-PRECISION
UNIVERSAL CYLINDRICAL GRINDER
MODEL: HTG-310 S/N: 1105 NEW: 1991
TABLE:
SWING OVER TABLE, AS EQUIPPED,
WITH 2" FACTORY RISERS ....... 11.8"
CENTER HEIGHT, WITH RISERS .... 5.9"
DISTANCE BETWEEN CENTERS ...... 13.4"
SWIVELLING RANGE .............. +/- 11°
WHEELHEAD:
WHEEL SIZE .................... 14"DIA. x 2"W x 5"BORE
SWIVELLING RANGE .............. +/- 12°
MOTOR ......................... 4 HP
RAPID APPROACH ................ 1-1/2"
INFEED-AUTOMATIC .............. 0 TO .050" ON DIA.
INFEED SPEED, MAXIMUM ......... 1.2"/MIN.
SPARKOUT ...................... 2 TO 30 SECONDS
WORKHEAD:
SPINDLE TAPER ................. #5MT
SWIVELLING RANGE .............. 360°
INF. VAR. SPINDLE SPEEDS ...... 50 TO 500 RPM
TAILSTOCK:
TAPER OF CENTER BORE .......... #3MT
TRAVEL OF CENTER .............. 0.8"
APPROXIMATE WEIGHT ............ 4,000 LBS
STANDARD FEATURES/ATTRIBUTES:
TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO
STEEL BEARING WHEELHEAD DESIGN
SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS
FOR TRAVERSE & PLUNGE GRINDING CYCLES
HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-PLUNGE INFEED
-RAPID WHEELHEAD ADVANCE AND RETRACTION
-SPARKOUT TIMER
DUAL LIVE/DEAD WORKHEAD SPINDLE
A 0.00002" GRADUATED DIAL SETS POSITIVE STOP DIAMETER
3/60/230-460 VOLT ELECTRICS
EQUIPPED WITH:
FACTORY RISERS, WHICH INCREASES THE SWING TO 11.8"
"SONY" #LH51 SINGLE AXIS DIGITAL READOUT DISPLAY
DUAL RATE AUTOMATIC PLUNGE INFEED OPTION,
"COARSE" & "FINE" CYCLE FEED OPTION
COOLANT SYSTEM WITH PAPER FILTRATION
COOLANT GUARDING
WORK LIGHT
BALANCING STAND FOR THE GRINDING WHEEL
(2) ADDITIONAL GRINDING WHEEL HUBS, WITH GRINDING WHEELS
DIAL INDICATOR, FOR TABLE SWIVEL ADJUSTMENT
CENTER IN WORKHEAD
RADIUS DRESSER
WORKHEAD SPINDLE IS A LARGE TAPER, No. 5 MT.
THIS ALLOWS ONE TO USE A 5C COLLET WITH AN
ATTACHMENT THRU THE SPINDLE, EITHER A
DRAW BAR, A QUICK ACTING LEVER TYPE UNIT,
OR A PNEUMATIC POWER CLOSER TYPE.
MACHINE MANUAL, COMPLETE DOCUMENTATION
WHEELHEAD MOTOR, 3 KW (4 H.P.), 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS
MACHINE IS WIRED FOR 3/60/480 VOLTS, 5.6 KVA
** MADE IN GRENCHEN, SWITZERLAND **
** ORIGINAL & BEAUTIFUL - EXCEPTIONAL CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
FOR MORE INFORMATION: Call Andy at 973-497-7600