New - 1986
Serial No. 32460-2211

SPECIFICATIONS:
Height of Centers, as Presently Configured............9.84" (250 mm)
Nominal Swing without Riser Blocks............13"
Riser Block Height............2.95" (75 mm)
Actual Swing with 3" Risers...................19"
Distance between Centers (Nominal)............23-5/8"
Distance between Centers w/Tailstock Overhanging............29-1/2"
Table:
- Longitudinal Table Travel............27"
- Longitudinal Table Travel per Handwheel Turn - Coarse............25/32"
- Longitudinal Table Travel per Handwheel Turn - Fine............3/32"
- Longitudinal Table Speed - Hydraulic............0.06 to 18' FPM
- Table Swivels............11 Degrees
- Reversing Dwell............0 - 5 Seconds
Grinding Wheel Infeed:
- 1 Graduation of Feed Scale............0.0002"
- Automatic Feed - Maximum............0.035"
- Automatic Infeed Per Table Reversal............0.00005" - 0012"
- Infeed for Plunge Grinding............0.00004" - .002"
- Plunge Grinding - Infeed Speed............10 - 1000 uIN/Second
- Micrometer Stop, 1 Graduation............0.00005"
Universal Grinding Spindle Head:
- Transverse Movement of Wheel Slide............11-1/4"
- Hydraulic Rapid Wheel Slide Advance/Retraction Stroke............1-9/16"
- Grinding Wheel Speeds - RPM (4)............1500, 1700, 2220 & 3600
- Grinding Wheel for Cylindrical Grinding............16" X 2" X 5"
- Grinding Wheel - Surface Grinding............10" X 3/4" X 3"
- Swivel of Grinding Head w/Locking Every 90 Degrees............270 Degrees
-Vert. Motion of Grinding Spdl Head, Height of Centers............4-59/64" - 13-25/32"
Workhead:
- Spindle Speeds - Infinitely Variable............10 - 400 RPM
- Workhead Swivels............360 Degrees
- Inside Taper of Work Spindle............#5 MT
Approximate Floor Space Required............102" X 64" X 66"
Approximate Weight............6,000 Lbs.

EQUIPPED WITH:
OEM "Riser Blocks" (76mm / 3") for column, headstock, tailstock and dresser
Hydraulic Operation Featuring: Single Lever Control, Infinitely Variable Table
Traverse, Automatic Feed, Plunge Feed, Rapid Wheel Advance & Retraction Sparkout Timer
Three Wheelhead Machine: Left-Hand (O.D.) & Right-Hand Wheel Mounting (Face Grinding) with Swing-Around I.D. Grinding Unit (Capability)
Coolant System with Paper Filtration
Sine Bar Attachment
Hubs, Books, Manuals and Drawings.

*Preliminary Specifications, Pending Confirmation.

This machine is listed for sale by Liberty Machinery Company located in Lincolnshire, Illinois