buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Grinders & Grinding Machines > Cylindrical Universal Grinders    < Back

Landis, Type 3R Universal Cylindrical Grinder - $12,500

Item Number: #00035976
Landis, Type 3R Universal Cylindrical Grinder

Landis, Type 3R Universal Cylindrical Grinder
Price: $12,500

Cylindrical Universal Grinders

Manufacturer:  Landis
Model:  3R
Condition: Used

Nominal Work Swings: 14"
Nominal Dist. between Work Centers: 96"
Max. Work Swing and Dia. Standard Machine Will
Grind with Full Size Standard Wheel on Basic Machine: 14-31/32"
Min. Dia. Wheel to Grind Zero Dia. Work on Centers: 1/4"
Coolant Tank Capacity - Gallons: 40
Hydraulic Tank Capacity - Gallons: 25-1/2"
Height from Floor to Work Centerline: 43"

Work Carriage:
Traverse Speed-Inches per minute: 2 to 240
Traverse per Turn of Handwheel-Slow: 0.100"
Fast: 0.750"
Center Rest Capacity: 1" to 7"
Work Rest Capacity: 1/2" to 7"
Grinding Wheel Size-Standard: 14" X 1-1/2" X 5"
Grinding Wheelhead Swivel Range-Upper: 180 degrees
Lower: 60 deg. CW-30 deg. CCW
Grinding Wheel Spindle Speeds-RPM: 1720-2185
Automatic Infeed at Table Reversal*-on Dia. Basic Machines: 0.0003" to 0.004"
Machines with Hydraulic Infeed: 0.0002" to 0.004" *
Max. Distance Wheel Centerline to Work Centerline: 17-1/16"
Min. Distance Wheel Centerline to Work Centerline: 3"
Work Dia. Reduction per Revolution of Handwheel: 0.100"
Work Dia. Reduction per Revolution of Fine Feed Knob: 0.001"
Max. Hydraulic Feed-on Dia. for Hyd. Infeed Machines: 0.090" *
Rapid Infeed Stroke for Hyd. Infeed Machines: 1-1/2" *
Internal Spindle Speed-RPM: 15,000
Headstock Work Center: #14 Jarno
Footstock Work Center: #10 Jarno
Footstock Center Movement By: Lever and Handwheel
Work Speeds-Infinitely Variable-RPMLow Range: 25 to 125
High Range: 100 to 500
Dia. Hole Through Headstock Spindle: 1-7/16"
Headstock Swivel Range: 120 degrees
Headstock Spindle Nose: 6A-2

Electric Motors:
Wheel Motor Drive-HP: 3
Work Drive Motor-HP: 3/4
Hydraulic Oil Pump and Generator Drive Motor-HP: 2
Coolant Pump Motor-HP: 1/4
Internal Fixture Motor-HP: 1
Wheel Spindle Lubrication Pump Motor-HP: 1/4"

General Information:
Swivel Table Graduated-(Inches per foot): 4" *
Swivel Table Graduated-(Degrees include angle): 19 degrees
Floor Space Required: 74" X
Weight of Machine-Net: 10,400 Lbs.

Coolant system and splash guards
Internal grinding spindle, swing type (without quills)
Wheel center and flange
10" T-slot face plate
Jogren 5C Handwheel Collet Chuck with adapter plate
(4) Work rests (1) Center rest (incomplete)
Dresser holder (w/o Diamond)
Work centers
Misc. lot of grinding wheels

CONDITION: Very good, can be demonstrated under power.


Contact Seller

This machine is listed for sale by Zedco Machinery Inc located in Rochester, New York

Contact the Seller
Zedco Machinery Inc
  P.O.Box 60828
NY 14606
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Address (including City, State)*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details