buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Electrical Discharge Machines - EDM > Conventional EDM - Ram / Sinker CNC    < Back

Hansvedt ZNC Ram EDM - $8,500

Item Number: #00144939
Hansvedt ZNC Ram EDM

Hansvedt ZNC Ram EDM
Price: $8,500
Subcategory: 

Conventional EDM - Ram / Sinker CNC

Power32A
Table width15"
Year of Manufacture:  1998
Manufacturer:  Hansvedt
Model:  MV10
Condition: Used

ECEDM & Remedy Machine Sales, LLC Ed Tremblay
215-540-0404 Website: Remedymills.com


USED HANSVEDT MODEL MV 10 ZNC ELECTRICAL DISCHARGE MACHINE SYSTEM
(Programmable Z moves, Power Supply settings and Orbit functions)

EC EDM has sold Hansvedt products for 27 years and is a full service dealer.

MACHINE TOOL SPECIFICATIONS
Table Travel................ 8" x 6" Ram Travel ........ Programmable 8"
Worktable Size ... 15" x 9" Worktank Capacity........ 200 lbs.
Worktank Size.... 25.5" x 16" x 11" Deep
Platen size ........ 3.25" x 3.75" Orbiter Travel (U,V).... +\- 0.200"

M-PULSE POWER SUPPLY
Mach. Current ......... 25 amps Peak Current ......0.2 to 25 amp 75 Peak
Current selections ... 25 Arc duration range . 0.1 to 1,800 Us

CNC CONTROL
Memory………… 2 GB CRT display .... Replaced 14" VGA color
DRO ......0.0001", Z axis Input modes .... Manual, RS 232C, 3.5" disk
Servo Controls ..... Edge Find, Jog, Trace, Home (U,V,Z) Tram Zero Set
Stop Return Line Select Start Return

Programmable Parameters..... Z Cut Depth, Current Cut-Off, Peak Current
Fault retract, Arc Duration, Ram Cycle, % On-Time, Flushing, Polarity,
Auto Shut-Off, Gap Spacing, Generator Type, Servo Speed

DIELECTRIC SYSTEM:
Worktank Capacity ..... 20 Gallons System Cap ….. 50 Gallons 1 Filter element
System Cleaned and ready New Filter installed 1-19 and ready for your new oil

GENERAL:
Height/width/depth ....... 83"X 72" X 58 Power in: ... 195 to 250 VAC, 3 phase, 5 KVA

STANDARD EQUIPMENT:
1. Floor-standing cast-iron column and pedestal top, Steel Base and Dielectric Tank
2. Precision Table w/3 t-slots 3. High speed DC servo/ballscrew drive.
4. Rigid quill-type w/ mounted Orbiter, to accept your Tooling. (Optional 3R Magnet)
5. Dielectric fluid system including reservoir, pump and (New) 5 micron filter.
6. Transparent worktank door / reservoir fluid circulation.
7: M Pulse Model 1025, 25 amp power supply/control with 14" color VGA LCD


Standard Orbiting Unit:
Orbiting units offer simultaneous multi Axis movement in programmed increments.
The Hansvedt ZNC Controls automatic orbiting with easy to use canned cycles. Programming
is easy using conversational English. This programmable Orbiting unit has several basic Modes:
1: Circle, Increasing Steps 2: Sector, section of a circle 3: Vector, Arbitrary Directions
4: Square Mode 5: Circle, Undercut to dimension 6: Thread Machining


Warranty:
We offer a Used machine warranty only when ECEDM installation and training are purchased !
Local Customers: 15 day warranty includes parts and labor by ECEDM .
Out of area customers - Parts and phone instruction is offered.

Demo: The machine is under power at our facility, and is ready for your inspection, and a
simple demo at No charge. Training and installation at ECEDM is offered at a discount.
ECEDM has tested this machine and it is ready for sale.

Test Cut: Deposit required: ECEDM will purchase the Brand of EDM Oil which you desire and/or
use at your facility for your demonstration, test cut and training. This Oil will be shipped with
the machine to you in the original 55 gallon drum.

This machine is under power – Simple control operation video’s are available, call for details.


New Machine Reference Base Price MV-10, 25 amp MS 1/1025....... $ 36,700.00


Used MV-10 Machine Package:
MV-10 ZNC Hansvedt Ram EDM Machine 25 Amp Model................ $ 8,550.00
CNC Orbitor with V-Block Electrode Holder
3R Magnetic chuck mounted to the platen of this machine……… $ Included (Shown in Pictures)
MS 115 XY Interactive Digital Readout .0001 resolution.................... $ Included
Machine Total ......... $ 8,500.00
Complete your order:
EDM Oil, Table Magnetic Chuck, EDM Tooling, Shipping, Installation and Training

Optional Items:
RW 103 Remote Control Hand Box....(New only)........................................................ $ 1,200.00
0.90” Fixed V-Block tool holder mounted to the platen of the machine………… $ 450.00
Used 3R-321-5 20mm Hyd. tool holder for use in the 3R Head Magnet…………… $ POR
Manual 20mm tool Holder…………………………………………………………………. $ POR

We offer New and Used 20mm tooling and 20mm shanks – Request a full tooling pkg and price. All
of this tooling sells

Contact Seller

This machine is listed for sale by ECEDM & Remedy Machine Sales, LLC located in Levittown, Pennsylvania

Contact the Seller
 
ECEDM & Remedy Machine Sales, LLC
  2 Sunflower Rd
Levittown
PA 19056
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details