buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Lathes & Turning Centers > Combination Lathe-Milling Machines    < Back

2012 MORI-SEIKI NT-4300 DCG / 1500-SZ FANUC 31iA5 CNC Control Turn Mill Cen - $RFQ

Item Number: #00113677
2012 MORI-SEIKI NT-4300 DCG / 1500-SZ FANUC 31iA5 CNC Control Turn Mill Cen

2012 MORI-SEIKI NT-4300 DCG / 1500-SZ FANUC 31iA5 CNC Control Turn Mill Cen
Price: $RFQ
Subcategory: 

Combination Lathe-Milling Machines

Year of Manufacture:  2012
Manufacturer:  Mori Seiki
Model:  NT-4300-1500Z
Condition: Used

2012 MORI-SEIKI NT-4300 DCG / 1500-SZ FANUC 31iA5 CNC Control Turn Mill Center

Fanuc F31iA5 control with MAPPS IV. Operating system • 30/25 hp main and sub spindles, 4000 rpm, •12” UBL Pull Back Design 3-Jaw hydraulic chuck on main and sub spindle, • 25/15 hp tool spindle with contouring B and Y-axis, Capto C6, 12000 rpm, 100-Tool ATC,• Automatic Renishaw tool setter for both turret 1 and 2 (M-code operated),2-station lower live tool turret, max. 6000 rpm tool speed, Coolant system (shower, CTS, wash Down) • Coolant tank, Air blow thru chuck on sub spindle, Chip conveyor, right disposal type, •Full machine cover with two sliding doors
•Low hydraulic pressure switch, • Low air pressure switch, Automatic power-off, • Chuck foot switch
Built-in work lights, • Hand tools, One set of machine and control manuals

Main Machine Specifications
Max. work piece swing diameter 28.74”
Swing over cross Slide 28.74”
Swing over cross slide at Turret 2 15.75”
Max turning diameter with tool spindle
(Capto C6) 25.98”
with Turret 2. ......................……. 13.78”
Max. turning Length....………......… 60.71”
Max. bar capacity ....……….........… 4.00”
Max. distance between centers…....73.31”
Travels Y-axis travel……...........…..± 8.27”
X1 - axis travel (tool spindle) ..…... 29.53”
Z1 - axis travel (tool spindle)….......61.02”
X2 – axis travel (turret 2)…........... 7.68”
Z2 – axis travel (turret 2)…….…..... 60.04”
B Axis indexing travel (tool spindle).± 120°

Main Spindle
Max. spindle speed (rpm)…………...... 4,000
Spindle speed ranges (winding change) 2
Spindle nose..........……………..........… A2-8
Spindle bore diameter………………....... 3.58”
C-axis spindle Positioning….…..…...... 0.0001°
Spindle bearing ID……….………........... 5.51”
Spindle torque (30 min./Cont. rating)
[ft.lb} 413/302
Counter Spindle (Sub spindle)
Max. spindle speed (rpm)........………. 4,000
Spindle speed ranges (winding change) 2
Spindle nose……………………................. A2-8
Spindle bore diameter .……………..........3.58”
C-axis spindle positioning…...…….........0.0001°
Spindle bearing ID……….………............. 5.51”
Spindle torque (30 min./Cont. rating)
ft.lb} 413/302
Tool Spindle (Turret 1.)
No. of tool stations………….........…....….. 1
B-axis indexing time (sec.)………........... 0.4 / 90°
Min. B-axis indexing increment…………... 0.0001°
Max. spindle speed (rpm) ..……… ..........12,000
Spindle tool holder type .........……........ Capto C6
Spindle bearing inner diameter…….........2.76”
ATC tool storage capacity………............. 100 ATC
Max. tool diameter
(w and w/o adjacent tool)..................…2.76/5.51”
Max. tool length…..……………................. 15.75”
Max. tool weight (lbs)………….…............. 22
Tool change time (tool-to-tool)..…........ 1.25 sec.
Max. spindle torque (ft.lb)………............. 88.50
Tool Turret (Lower Turret 2.)
No. of tool stations …………...............…… 12
Tool holder square shank .……...…...........1”
Max. boring bar diameter ,,………............2”
Turret indexing time (station-to-station) 0.28 sec.
Max. live tool speed (rpm)………….......... 6,000
Max. live tool torque (ft.lb)....………........ 29.50
Feedrate
Y-axis rapid traverse rate (in./min.)........1,181
X1 / Z1 rapid traverse rate (in./min.)......1,969
X2 / Z2 rapid traverse rate (in./min.)...... 1,181
A-axis rapid traverse rate [counter sindle] (in./min.) 1,181
B-axis rapid traverse rate (rpm)….......... 100
C-axis rapid traverse rate (rpm)............ 250

Motors
Main spindle (30min. / cont.) [hp]..... ....30/25
Counter spindle (30min. / cont.) [hp] .....30/25
Tool spindle (turret 1) motor [hp].......... 25/15
Turret 2. Live tool motor [hp]………......... 7.5/5
Coolant pump CTS tool spindle(turret1) ...1.4 Hp.
Coolant shower, coolant gun [hp]…........ 1.4 Hp.
Turret 2 coolant pump [hp]…………........... 1.4 Hp.
Coolant through chuck (main/counter spindle, each) [hp] 1.6
Coolant steady rest roller wash (option) [hp] 0.7
Power supply (kVA).......………................... 83
Compressed air (PSI / GPM)…................... 72/118

Tank Capacity
Coolant tank (gal.)...……………................... 169
Coolant cooler tank (gal.)……........……........50
Super high pressure coolant tank (gal.)......35
Spindle chiller tank (gal.)..………….............. 5.3
Way lube tank (gal.)……………….................. 0.5
Hydraulic tank (gal.).………………................. 5.3
Machine size
Machine height………...…………......... ...........110”
Floor space (width x depth)...................... 212x129”
Machine weight ..…………........................... 56,320 lb
Chip blaster 1000 PSI High Pressure Coolant System

Special Price 2012 Mori Seiki NT-4300 DCG/1500SZ
as equipped with all Options:

F.O.B: Machine Prep & Loading Quotes on Request.

*Specifications are Guide and Confirmations Required.

I look forward to providing further information on request.


Sincerely,

Contact Seller

This machine is listed for sale by located in Waterford, Wisconsin

Contact the Seller
 
Private Seller
29040 Kramer Drive
Waterford
WI 53185
United States
 
Request Call from Seller Email seller

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details