buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Millers & Milling Machines > Centering & Cut-Off Millers    < Back

NEW 106.6" x 29.5" SHARP MODEL KMA-5 VERTICAL BED MILL - $RFQ

Item Number: #00133646
NEW 106.6&quot; x 29.5&quot; SHARP MODEL KMA-5 VERTICAL BED MILL

NEW 106.6" x 29.5" SHARP MODEL KMA-5 VERTICAL BED MILL
Stock Code:  14570
Price: $RFQ
Subcategory: 

Centering & Cut-Off Millers

Manufacturer:  Sharp
Model:  KMA-5
Condition: New

NEW 106.6" x 29.5" SHARP MODEL KMA-5 VERTICAL BED MILL



Heavy duty vertical bed mill equipped with geared head spindle and massive hardened and ground bed ways for heavy milling  



Boring Capability


The full length travel of the vertical head (20” on Model KMA-1, 21.5” on KMA-2, and 30” on KMA-3) along with 6 different feeds (0.002 – 0.008 inch per revolution) offer capability for precise boring operation.


Electro-Magnetic Spindle Control


The spindle is equipped with electric power brake for instant clamping of spindle. It also has forward/reverse switch for tapping operation, and spindle jog motion for proper tool holder engagement.


Hardened and Ground Gears


The gearbox inside the spindle head and the table feed mechanism utilize hardened and ground gears for long lasting wear.  The spindle head gearbox is equipped with an automatic lubrication system. The table feed gearbox has an oil splash system for lubrication.


Pendant Style Operation Panel


The pendant control panel allows easy operation of all power driven mechanism, electrical, pneumatic or hydraulic. It has a toggle style control for 4-way feed and rapid traverse of the table.


Auto Lube Table and Saddle Ways


The slideways upon which the saddle and table travel, are automatically lubricated when the machine is turned on.


Hardened and Ground Boxways


The C frame construction offers the best machining capability for heavy milling and boring applications.  By using hardened and ground double box ways in the Z axis, significant rigidity is given to the cutting head.  The saddle is also mounted on two massive hardened and ground body ways for maximum stability during heavy cutting.


Honey Combed Ribbing


The vertical column is made out of box-shaped, high quality, gray iron castings.  It is reinforced with honeycombed ribbing, instead of the usual rectangular ribbing, which is 70% more effective in dampening vibration and sustaining mechanical and thermal stability.


Table and Saddle


High quality castings used on the table and saddle are stressed relieved to avoid any slight distortion in the future and the sliding surfaces are hand scraped to ensure full bearing support and to achieve high accuracy in machining.  All top, front, rear reference surfaces and T slots are precision ground to exact tolerances. 


Adjustable Backlash Eliminator


A double-nut construction eliminates backlash between the nut and the lead screw that drives the table.  This allows accurate movement of the work piece during machining.  As time goes, there will be wearing on the nut creating backlash, the double nuts can be adjusted to take out the additional backlash.  Precisely milled oil groves on top of the saddle ensured adequate lubrication between the table and the saddle.


Unique Sliding Saddle Base Design


To allow easy access to the work piece for inspection or positioning, the entire saddle base can slide in and out from the operator manually or by power feed.  This feature is particularly convenient considering the cross movement of the saddle can reach up to 23”.


Eye Level vertical Head Control


The large spindle head offers manual coarse and fine in addition to power feed for positioning of the head.  Controls for these feeds together with spindle speeds and the head locking mechanism are all mounted at eye level on the spindle head casting.  The tri-lever rotating manual rapid feeds mounted at the front allowing quick positioning of the head for machining.


Oversized Spindle


For heavy-duty cutting.


Built-In Coolant Tank


Located at the base of machine to save space.


Pneumatic Power Locking System


Equipped for a vertical spindle head, and a separate pneumatic system for locking table and saddle.


Variable Speed Drive On Table and Saddle


Using variable frequency inverter drive control on the motor, the feed rate of table and saddle can be varied at the turn of a knob.


Auto Lube Vertical Slideways


The slideways upon which the vertical spindle head travel, are automatically lubricated when the machine is turned on.





Contact Seller

This machine is listed for sale by Blumberg Machinery located in Bannockburn, Illinois

Contact the Seller
 
Blumberg Machinery
  2201 Waukegan Rd Suite 250
Bannockburn
IL 60015
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address (including City, State)*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details