BAILEIGH Hydraulic Box and Pan Brake BB-7210H
Box & Pan Brakes (Finger)
CALL FOR BEST PRICING!
The BB-7210H hydraulic sheet metal brake can bend 10 gauge mild steel sheet metal across its full 6-foot (72”) length. It also handles smaller gauges just as easily.
Maximum bend angle of 135°.
1” beam adjustment.
Made with top-quality industrial-grade hydraulics for reliability over many years of use.
You can operate the hydraulic system in manual or semi-automatic mode to lift the leaf.
Programmable-stop bend adjustment makes production runs more efficient and ensures repeatability.
3 hp motor controls all hydraulic functions and runs on 220-volt 3-phase power.
Electric motor attached to a cam lifts and clamps the beam to deliver the extreme pressure required to bend 10 gauge mild steel.
Includes 17 hardened 3-piece fingers (6 of 3", 3 of 4", 6 of 5", and 2 of 6") to adjust for just about any size box or pan.
6” maximum box depth.
Removable bending apron lets you get closer between bends.
Fully-welded top beam and bending leaf, stabilized with solid steel support rods, keep deflection and twisting to a minimum when you’re bending at full capacity.
Baileigh covers this sheet metal finger brake 1-year parts warranty.
Comes with lifetime technical support by phone. You can call our knowledgeable team of reps for machine help and project advice anytime.
This metal brake and its replacement parts are always in stock for fast deliveries.
Thickness (SS): 10 ga (12 ga)
Bend Angle: 0 – 135 deg.
Finger Sizes: 3" / 4" / 5" / 6"
Beam Adjustment: 1"
Min Reverse Bend: .984"
Box Depth: 6"
Motor: 5 hp
Power Requirement: 220V / 3-phase
Shipping Dimensions (L/W/H): 110" / 44" / 69"
Shipping Weight: 5,280 lbs.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida