Ingersoll Master Center CNC Horizontal Table Type Boring Mill
Rebuilt & Retrofitted in 2013, Stock# Q10599

Work Completed During Retrofit/ Rebuild:
Fanuc 31i Retrofit 2013, New Ballscrews, New Motors, New Drives, New
Wiring, Ram Rebuilt, Heads Rebuilt, Waycovers Rebuilt, Bedways Ground, All New Piping for Lube and Pneumatic, New Chip Conveyors, C Axis Bearing, C Axis Clamping, Chiller Unit.

This Very Large Rebuilt Ingersoll Master Center is a Horizontal Boring Mill with a Massive 24"sq Ram Instead of a Quill. It Has a 206" x 120" CNC 360 deg Rotary Table with 215" of Cross Travel. The Massive Column has 150" of Vert Travel and 150" of W axis Column Travel. The Machine Has No Toolchanger But Has a Qty (7) Head Automatic Head Changer with These Heads: (2) Nutating Heads, (1) 6:1 Straight, (1) 6:1 Angle,
(1) 1:1 Straight, (1) 1:1 Angle, (1) 12:1 Angle (Right) for Large Slotters and Face Milling. A Master Drive System with Integrated
C-Axis is Powering the Spindle Units. The Head Changer Arrangement Allows This Horizontal Boring Mill to be Used for a Flexible Application Range. This Flexibility Includes Capacity for 5-sided Machining, Vertical Turning and Machining on Inclined and Angular Surfaces. Equipped with a Modern Hydrostatic Guide Way System for X,Y,Z,W and E Axis Which Has Virtually No Friction, Practically No Wear, and Extremely Good Dampening Characteristics. Further Equipped with Modern AC-axis Drives, and a Backlash Free Drive Systems, and Digital Feedback.

EQUIPPED WITH:
Fanuc 31i CNC Control, 206" x 120" CNC Rotary Table with Heidenhein Rotary Scale Feedback and qty (4) Shot Pin Table Locking System,
(7) Head Automatic Head Changer, Ram Type Spindle, Flood Coolant
and Through the Tool Coolant, and Upgraded Chip Conveyors.

Note: Currently No Pit Except for the Chip Conveyor

SPECIFICATIONS:
Ingersoll Master Center with CNC Control......... Fanuc 31I-B5 CNC
X-axis - Table linear travel, across................... 5500mm (216.54")
Y-axis - Headstock vertical travel.................... 3800mm (149.60")
Z-axis - RAM horizontal travel, in/out.............. 1100mm (43.30")
C-axis - Rotary Axis (around horizontal Spindle),
continuous and reversible
E-axis - Table Rotation.................................. 360 Degree
W-axis -Column traveling horizontal, in/out...... 3,800mm (149.60")
B-axis - Nutating Axis.................................... +/- 95 degree
Table Size..................................................... 5250mm x 3000mm
Table Weight Capacity..................................... 50 ton
Spindle Power:.............................................. 125 HP continuous
RAM Size:..................................................... 600 x 600mm /
23.6" x 23.6"
Axis Speeds/Feed Rates X,Y,W-Axis................... 15000mm/min 600 ipm
Axis Speeds/Feed Rates Z-Axis......................... 5,000mm/min 196.8 ipm
Axis Speeds/Feed Rates C-Axis......................... 8 rpm
Axis Speeds/Feed Rates E-Axis......................... 1.25 rpm


CONDITION: Appears to be in Excellent Condition.

This machine is listed for sale by Great American Equipment Co located in Cincinnati, Ohio