buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Borers & Boring Mills > Boring Machines - Portable    < Back

Q150-S Line Boring Kit - $RFQ

Item Number: #00035286
Q150-S Line Boring Kit

Q150-S Line Boring Kit
Price: $RFQ

Boring Machines - Portable

Model:  Q150-S
Condition: New

Bores single holes or 2 holes in-line from 1.75 to 5.5 inches diameter spaced to about 20 inches apart.

1.50" dia x 36" long Boring Bar - made from highest quality chrome induction hardened and precision ground 100,000 PSI tensile strength alloy steel. The chrome resists burrs and scoring to still fit the bearings use after use. Cutting Bit mounting holes are spaced 5 inches apart. 3/4" shank with 3 flats for solid gripping by your drill chuck.
1 Drill Base Adapter with built-in bearing - Important safety device to hold the magnetic drill press in case of power failure. The built-in bearing takes the load of the boring shaft to prevent overloading the internal drill press bearings. Includes mounting hole for BOA-408-AMT bore welder.
2 Self-aligning Bearings - the I.D. of the bearings have a perfect fit between bar and bearings, which insures holes can be bored to near zero TIR runout.
2 Bearing Plates and 4 Standoffs - 3/4 inch thick for easy weld on and vibration free machining.
2 Centering Cones - for quick concentric alignment of the boring bar and bearings in larger holes.
2 Centering Sleeves - for quick concentric alignment of the boring bar and bearings in smaller holes.
7 Bore Cutting Tools - 3 types of boring, 1 chamfering and 1 facing. Held in the boring shaft by heavy set screws.
1 Electronic Caliper - Measures 0" to 8" with digital readout to .001" in/mm
1 Telescoping Bore Gage Set - To measure the diameter of your holes.
1 Wood case - with dolly wheels.

Powered by your magnetic drill with 3/4" drill chuck.
Optional Milwaukee Portable Magnetic Drill Press with chuck: (Variable speed, 11" stroke. See below)
Optional Adaptor, large Cones & Bearing Plates to bore up to 8 inches diameter:
Optional Q88A 7/8" x 36" Boring Bar Kit for use with Q150 equipment. Bores holes 1" to 1.5" diameter:
Optional BOA-408-AMT Bore Welder:
Optional Measuring Tools: for bore sizing and tool positioning

Contact Seller

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois

Contact the Seller
American Machine Tools Company
  5864 N Northwest Hwy
IL 60631
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Address (including City, State)*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details