BAILEIGH Programmable Tube Bender RDB-350-TS
Benders - Pipe Tube & Bar
CALL FOR BEST PRICING!
This tubing bender for sale will stand up to the rigors of any shop—and save you time. The RDB-350-TS industrial tubing bender bends 180° in 16 seconds. And its quick-release die system speeds up production.
Proudly engineered and made in the USA.
Capacity of 2.5” schedule 40 pipe and 3” tube with .187” wall thickness.
24” centerline radius maximum.
Bends to 360° in one shot, both left and right.
You can program the desired angle, material springback, and bend speed for easy repeatability.
Programmer can also keep track of rotational orientation.
Touchscreen controller designed for user-friendly programming.
320° rotation of the controller lets you operate RDB-350-TS from any side of the machine.
Internal memory can store up to 170 programs of 10 bends per program.
Unlimited program storage/backup via the micro SD port (standard 2CB SD card).
Quick-release counter die system allows allows you to load and unload the pipe bender quickly for high production runs.
Like all Baileigh tubing benders, the RDB-350-TS is compatible with our standard drop-on tooling. We can also make custom tooling for your application.
Accepts a rotary positioning table, available from in several lengths, to achieve accurate bends on varying planes.
We cover this pipe bender with a 1-year parts warranty.
Includes lifetime technical support by phone, so you can call up a Baileigh representative anytime for project advice and troubleshooting.
Country of Manufacture: United States
Minimum CLR: .5"
Minimum OD: .24"
Mild Steel Solid Rod: 1.5"
Mild Steel Pipe Schedule 40: 2.5"
Mild Steel Round Tube Wall: 3" (.187)
Mild Steel Square Tube (Wall): 3" (.125)
Stainless Steel Pipe Schedule 40: 2"
Stainless Steel Round Tube Wall: 3" (.125)
Chromolly Round Tube Wall: 2.5" (.125)
Aluminum Round Tube Wall: 3.5" (.250)
Maximum Center Line Radius Clr: 24"
Power: 220V / 3-phase
Special Notes: tooling not included, contact Sierra Victor Industries 386-304-3720 for correct sizing.
Shipping Dimensions: 72" x 44" x 50"
Shipping Weight: 1,505 lbs.
B-LUBECP: Biodegradable Bend Lube: 8oz
B-LUBEPT: Biodegradable Bend Lubes: 16 oz
B-LUBEQT: Biodegradable Bend Lubes: 32 oz
ORG-3600: Outside Radius Gauge
IRG-3600: Inside Radius Gauge
AF-360D: 360 Degree Digital Angle Finder
AF-360D-Holder: Clamp and Holder for AF-360D Angle Finder
RT-1B: Round Tube Die Package
RT-2B: Round Tube Die Package
RT-3B: Round Tube Die Package
RT-4B: Round Tube Die Package
RT-5B: Round Tube Die Package
RP-1B: Round Pipe Die Package
RP-2B: Round Pipe Die Package
RP-3B: Round Pipe Die Package
ST-1B: Square Tube Die Package
ST-2B: Square Tube Die Package
UBP-1200-325: Bend Plate for RDB-325
BT-PRO: Bend Tech - Tube and Pipe Bending Layout Software: Bend Tech Pro
BT-SE: Bend Tech - Tube and Pipe Bending Layout Software: Bend Tech SE
10' Index Table for RDB-325: IDX-10-325
10' Index Table for RDB-325 w/4-Jaw Chuck: IDX-10-CMH-4-325
15' Index Table for RDB-325: IDX-15-325
15' Index Table for RDB-325 w/4-Jaw Chuck: IDX-15-CMH-4-325
20 Index Table for RDB-325: IDX-20-325
20 Index Table for RDB-325 w/4-Jaw Chuck: IDX-20-CMH-4-325
Indexing table can be fitted allowing the fabricator to bend on varying planes and easily duplicate complex bends.
Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows this bending machine to have accurate bends in varying planes, as well as consistent measurements between bends.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida