Horn CNC100TSR Hydraulic CNC Tube Bender |
|
Stock Code: |
31220 |
Price: | $RFQ |
Subcategory: | Benders - Pipe Tube & Bar CNC |
Year of Manufacture: |
2014 |
Manufacturer: |
Horn |
Model: |
CNC100TSR |
Condition: | Used |
Reference #31220
Horn CNC100TSR Hydraulic CNC Tube Bender
FEATURES:
BendPro G2 V2 CNC Control
Bend Arm (C-Axis) by Hydraulic Driven Chain
Carriage (Y-Axis) by Servo Motor with High Speed Moves
Collet (B-Axis) Rotation by Servo Motor
Clamp, Pressure Die, and Pressure Die Assist are Hydraulic Driven
CAPACITY:
Bending Cap. Round Mild Steel (OD x WT) .. 4" x .217
Bending Cap. Round Non-Ferrous(OD x WT) .. 4" x .394
Bending Cap. Round Stainless (OD x WT) ... 4" x .120
Bending Cap. Square Mild Steel(OD x WT) .. 2.75" x .217
Bending Cap. Pipe/Mild Steel ............. 3 IPS Schedule 40
Bending Cap. Solid Bar/Mild Steel ........ 2"
Minimum & Maximum Bending Radius ......... 2.36"-15.75"
Maximum Bending Angle .................... 190 Degrees
Maximum Length over Mandrel .............. 141.75"
Maximum Pipe OD/For Repeat Feeding ....... 2"
Working Height ........................... 49.2"
Tooling Center Line Height ............... 2.75"
DOB (Bending) Speed ...................... 20 Degrees/Sec.
Accuracy of DOB (Bending) ................ +/-0.1 Degree
DDB (Feeding) Speed ...................... 29 IPS
Accuracy of DDB (Feeding) ................ +/- 0.004"
POB Rotation/Speed ....................... 240 Degrees/Sec
Accuracy of POB (Rotation) ............... +/-0.1 Degree
Hydraulic Motor .......................... 30 HP
Machine Dimensions ....................... 256" x 63" x 61"
Machine Weight ........................... 13,227 Lbs.
EQUIPPED WITH:
BendPro G2 V2 CNC Control
Bend Arm (C-Axis) by Hydraulic Driven Chain
Carriage (Y-Axis) by Servo Motor with High Speed Moves
Collet (B-Axis) Rotation by Servo Motor
Clamp, Pressure Die, and Pressure Die Assist are Hydraulic Driven
Mandrel is Hydraulic Driven with early withdrawal
Automatic Mandrel Lubrication
Overhead Tie Bar to Pressure Die Arm
Single Stack Tooling
Laser floor scanning for Safety
NOTE:
Machine has less than 20 hours (Ran 10 parts than lost job)
Inspect in Plant Under Power
This machine is listed for sale by Prestige Equipment
located in Melville, New York