Baileigh Metal Cutting Bandsaw BS-330M
Bandsaws Horizontal - Metal
|Width capacity: ||13"
|Height capacity: ||19"
CALL FOR BEST PRICING!
In 2005, we introduced the BS-330M manual mitering band saw. With steel frames and smooth hydraulic descent, these saws have given shops trouble-free productivity for 10+ years.
Maximum capacity of 13” OD round at 90°.
Accepts a large 1.25” blade.
Variable blade speed from 82 to 270 fpm lets you choose the right speed for metal, plastic, and wood.
3 hp motor runs on 220-volt triple-phase power, more reliable and efficient than single-phase.
Saw head miters up to 45°.
Heavy cast iron head and bow reduce vibrations while cutting.
Hydraulic descent makes production runs more efficient, increases blade life, and reduces operator fatigue.
Tungsten carbide blade guides get as close as possible to the material to allow for more precise cuts.
Laser guide helps you see where your cut will be and line it up.
Durable steel flywheels drive the blade.
Adjustable vise can move back and forth. A quick cam lock system holds it in place.
Control panel has large start and emergency stop buttons and a dial for adjusting the speed.
Swing-away material stop enables you to easily make repeatable cuts.
Baileigh’s patented blade tension gauge takes the effort out of getting the tension right. Just line the arrow pointer up with the green zone and you’re good to go.
Comes standard with a flood coolant system that will wash away metal shavings and prolong blade life.
Heavy electro-welded steel construction minimizes vibrations to keep cuts accurate.
Weighs over 1,800 lbs.
Automatic shut-off safety feature stops the blade from running when the saw gets to the bottom of the cut.
This metal band saw and its replacement parts are almost always in stock for quick deliveries.
Covered by a 1-year parts warranty.
You can count on lifetime technical support by phone from our team of reps, all with hands-on machine experience.
Capacity Round (90 / 45deg): 13” / 8.86”
Capacity Square (90 / 45deg): 13” / 8.86”
Capacity Rectangular (90/45deg): 13” x 18.9” / 11” x 10.04”
Blade Size (H/W/L): 1.5” / .043” / 161.4”
Blade speed (fpm): 82-270
Blade Guide: Carbide / Roller
Miter Angle: 0 –45
Miter Adjustment: Vice
Table Height: 30.5”
Descent Control: Hydraulic
Motor: 3 hp
Power Requirement: 220v / 3 phase
Dimensions (L/W/H): 90” / 37” / 61”
Weight: 1,826 lbs
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida