buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Automatic Screw Machines > Automatic Screw Machines - Swiss Type CNC    < Back

Ganesh Cyclone 32CS CNC Swiss Type Lathe, 1.25" Bar Cap. 7 Axes, 6000 RPM, Ganesh 900T, Edge Patriot 338 Bar Feed, New 2013 - $RFQ

Item Number: #00165673
Ganesh Cyclone 32CS CNC Swiss Type Lathe, 1.25&quot; Bar Cap. 7 Axes, 6000 RPM, Ganesh 900T, Edge Patriot 338 Bar Feed, New 2013

Ganesh Cyclone 32CS CNC Swiss Type Lathe, 1.25" Bar Cap. 7 Axes, 6000 RPM, Ganesh 900T, Edge Patriot 338 Bar Feed, New 2013
Stock Code:  56083
Price: $RFQ
Subcategory: 

Automatic Screw Machines - Swiss Type CNC

Year of Manufacture:  2011
Manufacturer:  Ganesh
Model:  CYCLONE 32CS
Condition: Used

CONTROL

Ganesh 900T Multi-Tasking Control

Capacity

1.25" (32mm) Standard

No of Axes:

7

Axes Name Designations:

X, X2, Y, Z, Z2, C, C2

Main Spindle

See Below

Maximum RPM / spindle bearing

6,000 RPM / 5-bearing spindle, 3-front, 2-rear ø110mm

Spindle Motor:

10-HP 3,000 rpm spindle motor, 2:1 pulley ratio

Spindle Bore - Main

1.456" (37mm)

Collet Nose - Main

B&S #22 or Traub A-32

Maximum Bar Stock Diameter - Main

1.25" (32mm Std.)

X-Axis Travel

7.28" (185mm)

Y-Axis Travel (true Y-Axis, not compound Y)

19.29" (490mm)

Z-Axis Travel

6.50" (165mm)

Rapid Travel Speed: x, Y, Z

1,181 IPM (30m / minute)

Minimum input unit:

40 millionths (0.00004") (0.01mm)

OD Turning Tool Positions:

6 OD Tools (½” or 12mm)

ID Turning Tool Positions:

5 ID Tools

OD Turning Tool size

½” or 12mm

ID Turning Tool Bore Size

25 mm

Spindle Center Height

40” (1015mm)

Sub Spindle: See Below

See Below

Sub spindle RPM / spindle bearing

6,000 RPM / 4-bearing Quad-Duplex pair configuration

Sub spindle Motor:

5-HP 3,000 rpm spindle motor, 2:1 pulley ratio

Collet Nose:

Brown & Sharpe #22 or Traub A-32

Maximum Barstock Diameter:

1.250” in collet chuck (1.080” (27.5mm) pass thru)

X-axis Travel:

11.53” (293mm)

Z-axis Travel:

11.61” (295mm)

Minimum input unit

0.0001” (0.001mm = 40 millionths inch)

ID Turning Tool Bore Size:

25mm

Dimensions

101" x 68" x 80" (LxDxHt)

Weight

8000 pounds


Control:&nbsp; Ganesh 900T Multi-Tasking Control with Color CRTEdge Patriot 338 Magazine BarfeederSub Spindle Options included:&nbsp;&nbsp;&nbsp;&nbsp; Air Blast nozzle: Included Finished Parts Ejector: Included Live Tooling: All live tools are gear driven w/ &oslash;42mm bearings &ndash; no belts! Cross slide live tools: 4-ER-20 cross slide live tools, 4,000 rpm, 2.0 HP (1.5kw) Front slide live tools: 3-ER-20 front slide live tools, 4,000 rpm, 1.0 HP (0.75kw) Subspindle axial live tools: 4-ER-20 axial live tools, 4,000 rpm, 1.0 HP (0.75kw) (1 radial live tool can be substituted on subspindle tool block) Live tool collet size: ER-20 collet, &frac12;
(0.5-13mm) tool shank capacity Max RPM for live tools: 4,000 RPMPart CatcherPart ConveyorChip ConveyorCoolant SystemSpindle ChillerCoolant Pump Dual 50psi 3/4-HP Coolant Pumps for main and subspindle Coolant Tank Capacity 80-gallon coolant tank, with coolant flow confirmation sensor Lubrication distribution Way lube distributed at 3-6 cc / 15 minute cycleMachine Power Requirements 220vac &plusmn;5%, 63-amps, 3-phase, 60Hz Air Requirements 85-PSI at 10-CFM for parts catcher, parts ejector, &amp; air blastManuals

Contact Seller

This machine is listed for sale by Orca Machine Tools, Inc. located in Fridley, Minnesota

Contact the Seller
 
Orca Machine Tools, Inc.
  7901 Beech Street NE
Fridley
MN 55432
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address (including City, State)*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details