buy & sell, new & used machinery, machine tools & equipment

Machine Tools > National > Michigan

National Machine Tools in Michigan

26 new & used National machine tools items for sale in Michigan
1 | 2
Refine: Viewing 1 - 20 of 26 matches
Sort by:
Items Per Page:  20  |  50 |  100
MODEL GHG NATIONAL BROACH GEAR HONE
EQUIPPED WITH: Crowning 18" Diameter Dresser Coolant Vari Drive SPECIFICATIONS: 3/4 HP Spindle Motor 1/3 HP Coolant 18" Swing, 24" Centers Maximum Pitch Diametral: 1" - 12" D
No. GHE, NATIONAL BROACH,
EQUIPPED WITH: Headstock w/Center Tailstock w/Center Crowning Worklight Change Gears SPECIFICATIONS: Min./Max. RPM: 70-490 rpm Hone Cross Feed: .280min./3.769max. IPM Max. Work Table Crowning Angle: 3 deg.
NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED HEAD & TAILSTOCK
IMMEDIATE DELIVERY EQUIPPED WITH: Crowning Diagonal Shaving 9" Cutter Head Power Headstock & Tailstock Auto Upfeed Trabon Tube New Splash Guard Feed & Speed Gears 220 - 440 - 480V 3 Phase 110V Pus
NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED, 9" CUTTER, PWR HEAD & TA
EQUIPPED WITH: Crowning Diagonal Shaving & Strait 9" Cutter Head Head Stock and Power Tailstock Auto Upfeed Trabon Lube Splash Guard Feed & Speed Gears Operators Maunal CATALOG SPECIFICATIONS: Pi
NO. GCI, NATIONAL BROACH, 8"CAP
EQUIPPED WITH: HEAD STOCK AND TAIL STOCK COOLANT SYSTEM AND WATER GUARD. CROWNING ATTACHMENT. LARGE SELECTIOM OF SPEED AND FEED GEARS. 9" CUTTER HEAD 220-440VOLT -3 PHASE -60 CYCLE A.C, MOTOR WITH 110 VOLT C
NO. GCI 18" NATIONAL BROACH
EQUIPPED WITH: Table w/Crowning 9" Cutter Head Push Buttons Feed Box & Miscellanious
NEW NATIONAL HYDRAULIC SHEAR MODEL NH5210
NEW NATIONAL HYDRAULIC SHEAR MODEL NH5210
NATIONAL BROACH, NO. RGB,12 ROLL FINISHER CYCLES IN 12 TO 15 SECONDS
EQUIPPED WITH: Trabon Lube Auto Load Vicker Hydraulic 480 V 350 Cycle Coolant Tank Chip Seperator Complete machine tooled to roll a one inch face pinion on last job Maximum pitch diameter is dependent on the
NO. SGK-24 NATIONAL BROACH GEAR GRINDER, 1985
EQUIPPED WITH: Helical Motion Internal Grinding Attachment Crowning Headstock Tailstock Automatic Cycles Hogland Dresser 16" Index Plate Coolant System SPECIFICATIONS: MODEL/SIZE/TYPE: SP
No. GFF, NATIONAL BROACH,
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant W/Magnetic Chip Separator Full Spl
MODEL No. GFF NATIONAL BROACH GEAR SHAVER WITH SERVO DRIVES
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant w/Magnetic Chip Seperator Full Spl
No. GFF, NATIONAL BROACH,
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant W/Magnetic Chip Separator Full Spl
No. GCY, RED RING, 1968,
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Water Guard W/Power Door Magnetic Chip Separator 220/440/3/60 AC Motor & Control SPECIFICATIONS: Pitch Diameter(Max. OD 19 1
MODEL "GCY" 18" NATIONAL BROACH GEAR SHAVER, NEW 1968 RECONDITIONED
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Water Guard w/Power Door 220/440/3/60 AC Motor & Control Trabon Lube System Electrical Prints SPECIFICATIONS: Pitch Diameter(
No. GCY, NATIONAL BROACH, 18"Cap,
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Magnetic Chip Seperator Water Guard w/Power Door Trabon Lube System 220/440/3/60 AC Motor & Control Electrical Prints SPECIFICA
NO. GCY, NATIONAL BROACH 18"CAPACITY GEAR SHAVER
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Magnetic Chip Seperator Water Guard w/Power Door Trabon Lube System 220/440/3/60 AC Motor & Control Electrical Prints SPECIFICA
18" MODEL "GCY" NATIONAL BROACH GEAR SHAVER;
EQUIPPED WITH: Crowning, 9" Cutter Head, Headstock, Power Tailstock, Coolant, Water Guard w/Power Door, 220/440/3/60 AC Motor & Control,
MODEL No. GCX,24" NATIONAL BROACH RED RING GEAR SHAVER WITH CROWNING
EQUIPPED WITH: 12" Cutter Head Crowning (1) 3 HP, 1800 RPM Work Drive Motor Adjustable Approximate Work Locators "V" Steadyrest For Supporting Shaft Long Machine Table In Place Of Standard Headsto
NO. GCU-12, NATIONAL BROACH, 12" CAPACITY
EQUIPPED WITH: 9" Cutter Head Power Tailstock Magnetic Chip Separator Palm Buttons Guard W/Sliding Doors Coolant Pump Large Selection of Gears Operators Manual CATALOG SPECIFICATIONS: Pitch Diameter
12" GCU NATIONAL BROACH RED RING GEAR SHAVER CROWNING, 1988
EQUIPPED WITH: Crowing Magnetic Chip Seperator w/Coolant Head Stock Power Tail Stock Diagonal & Straight Shaving 9" Cutter Head Speed & Feed Change Gears Power-Up Feed Power Lube Variable Voltage & Motor
Condition:
Manufacturer:
  • X National (26)
Location:
  • X Michigan (26)
Price:
  •  to 
1 | 2