buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Daewoo > Michigan

Daewoo Machine Tools in Michigan

27 new & used Daewoo machine tools items for sale in Michigan
1 | 2
Refine: Viewing 1 - 20 of 27 matches
Sort by:
Items Per Page:  20  |  50 |  100
DAEWOO PUMA 200 - CNC LATHE
DAEWOO PUMA 200 - CNC LATHE 1998 - Fanuc 18-T CNC Daewoo Puma 200 Specifications: Max Turning Diameter: 13.78 Max Turning Length: 21.6 Max Bar Capacity: 2.56 Swing Over Bed: 20.08 X Axis Travel: 9.53 Z Axis Tra
Daewoo DMH-400 (2000)
Daewoo DMH-400 (2000)
Daewoo DMH-400 (2000)
Daewoo DMH-400 (2000)
DAEWOO PUMA 300B CNC TURNING CENTER
YEAR NEW.......... 2001 SWING 22.4" TURNING DIAMETER 21.7" CENTER DISTANCE 41.1" BAR CAPACITY 3.54" TRAVELS (X) 14.3" (Z) 43.5" RAPID TRAVERSE (X/Z) 630/787 IPM
  • Swing: 22.4"
  • Centers: 41.1"
    DAEWOO PUMA MODEL 300LC CNC TURNING CENTER (2000)
    YEAR NEW.......... 2000 SWING OVER BED 22.44" TURNING DIAMETER 15.74" CENTER DISTANCE 51.8" BAR CAPACITY 4.05" TRAVELS (X) 10.2" (Z) 51.3" SPINDLE SPEED 3,500 RP
    • Swing: 22.44"
    • Centers: 51.8"
      DAEWOO PUMA V 400M CNC VERTICAL TURNING CENTER WITH MILLING (2004)
      YEAR NEW......... 2004 S.N. ........... PV40M069 MAX TURNING DIAMETER 16.5" MAX TURNING LENGTH 15.7" TRAVELS (X) 10.55" (Z) 19.21" SPINDLE SPEED 3,000 RPM SPINDLE NOSE A
      • Swing: 33"
        Daewoo DMV-4020 Diamond Series (2003)
        Daewoo DMV-4020 Diamond Series (2003)
        2001 Daewoo Mynx 540 CNC Vertical Machining Center
        2002 Daewoo Mynx 540 CNC Vertical Machining Center
        DAEWOO DMH-400 CNC Horizontal Machining Center (1999)
        DAEWOO DMH-400 CNC Horizontal Machining Center (1999)
        Daewoo Model Lynx 200 CNC Turning Center (2002)
        Daewoo Model Lynx 200 CNC Turning Center (2002)
        DAEWOO PUMA 15 (1990)
        SWING OVER BED 29.10" MAX. TURNING DIAMETER 25.2" DISTANCE BETWEEN CENTERS 62" X AXIS TRAVEL 14.5" Z AXIS TRAVEL 62" RAPID TRAVERSE RATE X AXIS 400 IPM RAPID TRAVERSE RATE Z AXIS 600 IPM SPINDLE NOSE A2-11
        Daewoo DMV 500 (1999): 40"x20"x20", 8K RPM, 25 HP, 30 ATC, B
        Specifications: Table Size............................................:47.2" x 19.7" X-Axis................................................:40" Y-Axis................................................:
        • X axis: 40"
        • Y axis: 20"
          Daewoo ACE V50 VMC (1997): 40"x20"x20", 8K RPM, 20 HP, 30 AT
          Specifications: TABLE SIZE......................................:19.7" x 47.2" MAX. TABLE LOAD (EVENLY DISTRIB.)...............:1,760 LBS SPINDLE NOSE TO TABLE TOP.......................:5.9" - 26.0
          • X axis: 40"
          • Y axis: 20"
            DAEWOO PUMA NO. 8-2SP
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2-Two Jaw Chucker NUM 1060 6-Axis Control Open Architecture In-Process Gauging NUM Service is Avail
            DAEWOO PUMA NO. 8-2SP
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2-Two Jaw Chucker NUM 1060 6-Axis Control Open Architecture In-Process Gauging SPECIFIFTCATIONS:
            DAEWOO PUMA NO. 8-2SP
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2-Two Jaw Chucker NUM 1060 6-Axis Control Open Architecture In-Process Gauging SPECIFIFTCATIONS:
            DAEWOO PUMA NO. 8-2SP
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2-Two Jaw Chucker NUM 1060 6-Axis Control Open Architecture In-Process Gauging SPECIFIFTCATIONS:
            DAEWOO PUMA NO. 8-2SP
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2-Two Jaw Chucker NUM 1060 6-Axis Control Open Architecture In-Process Gauging SPECIFIFTCATIONS:
            DAEWOO PUMA, NO. 8-2SP, 2000,
            EQUIPPED WITH: Auto Load/Unload 20 HP Spindle Drive (Opt.) Turbo Chip Conveyor Turret Tooling Automatic Door 2- Two Jaw Chucker NUM 1060 6-Axis Control Open Arhitecture In-Process Gauging SPECIFIFTCATIONS:
            DAEWOO PUMA NO. 10-2SP, FANUC 16TT
            EQUIPPED WITH: Fanuc 16TT Control Auto Lube Chip Conveyor Hydraulic Power Unit 10" Chuck Manuals Work Light Flood Coolant System Transformer SPECIFICATIONS: Maximum Swing: 15 3/4" Maximum Tur
            Condition:
            Manufacturer:
            • X Daewoo (27)
            Location:
            • X Michigan (27)
            Price:
            •  to 
            1 | 2