buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Daewoo > California

Daewoo Machine Tools in California

17 new & used Daewoo machine tools items for sale in California
1
Refine: Viewing 1 - 17 of 17 matches
Sort by:
Items Per Page:  20  |  50 |  100
DAEWOO, 4020 DIAMOND SERIES, 40" X, 20" Y, 24.6" Z, FANUC CN
SPECIFICATIONS: TRAVELS: --X: 40” --Y: 20” --Z: 24.6” TABLE SIZE: 39.4″ x 17.7″ MAX. TABLE LOAD (EVENLY DISTRIB.): 1,760 LBS SPINDLE NOSE TO TABLE TOP: 5.9″ – 30.5″ RAPID TRAVERSE RATE X & Y AXES: 1181
  • X axis: 40"
  • Y axis: 20"
    DAEWOO, 5025/40, 51" X, 25.5" Y, 24.6" Z, FANUC 21IM-B CNTRL
    SPECIFICATIONS: TRAVELS: --X: 51'' --Y: 25.5'' --Z: 24.6'' TABLE SIZE: 55.1'' x 25.6'' CAT 40 TAPER SPINDLE SPEED: UP TO 12,000-RPM EQUIPPED WITH: FANUC 21IM-B CN
    • X axis: 51"
    • Y axis: 25.5"
      DAEWOO, PUMA 450, 35.4" SWING, 21" Chk, CNC LATHE, NEW: 1998
      SPECIFICATIONS: MAXIMUM SWING OVER BED: 35.4" SWING OVER CARRIAGE: 24.8" MAXIMUM TURNING DIAMETER: 27.6" MAXIMUM TURNING LENGTH: 62" X AXIS TRAVEL: 14.6" Z AXIS TRAVEL: 62" SPINDLE
      • Swing: 35.4"
        DAEWOO LYNX 210 CNC TURNING CENTER
        Make: Daewoo Model No.: Lynx 210A Serial # L2103410 Year: 03/06 Condition: Very Good All specifications are approximations, and are subject to verification. “One Owner machine excellent running condition. It is
        DAEWOO DOOSAN DMV-500S VERTICAL MACHINING CENTER
        Make: Daewoo Model No.: DMV-500S Serial No.: AV5D0033 Year : 2001 Condition: Very Good Cutting Hours: All specifications are approximations, and are subject to verification. “On our Floor now, fully powered /
        • X axis: 40.2"
        • Y axis: 20"
          DAEWOO PUMA 240LB CNC TURNING CENTER
          Make: DAEWOO Model No.: Puma 240LB Serial # PM240145 Year: 2003, Installed: 2005 Condition: Excellent All specifications are approximations, and are subject to verification. “On Our Floor fully powered / tested
          • Swing: 21.8"
          • Centers: 26.8"
            DAEWOO DOOSAN MYNX 540 VERTICAL MACHINING CENTER
            Make: Daewoo Model No.: Mynx 540 Serial No.: AV5E01029 Year : 2002 Condition: Very Good Cutting Hours: 21069 All specifications are approximations, and are subject to verification. “10,000 RPM Machine on our F
            • X axis: 40.2"
            • Y axis: 20"
              DAEWOO PUMA 6G CNC GANG TOOL LATHE
              FANUC OT, 6000 RPM, 10 HP, ASSORTED TOOLING
              • Swing: 19.7"
                DAEWOO, ACEV65, 50" X, 25.6" Y, 25.6" Z, FANUC 16M CNTRL, NE
                SPECIFICATIONS: TRAVELS: --X: 50" --Y: 25.6" --Z: 25.6" POWER: 30 HP RPM: 4500 RPM # ATC: 32 TABLE-W: 29" TABLE-L: 59" TAPER: 50 WEIGHT 26,000 LBS. EQUIPPED WITH: CONTROL: F
                • X axis: 50"
                • Y axis: 25.6"
                  DAEWOO, DMV 4020, 40" X, 20" Y, 24.6" Z, FANUC 21iMB CNTRL,
                  SPECIFICATIONS: TRAVELS: --X: 40" --Y: 20" --Z: 24.6" TABLE SIZE: 47.6" X 19.7" RAPID TRAVERSE: X & Y: 1181 IPM Z : 781 IPM SPINDLE TAPER: CAT 40 SPINDLE SPEEDS: 12,000 RPM SP
                  • X axis: 40"
                  • Y axis: 20"
                    DAEWOO PUMA 250B CNC TURNING CENTER
                    Make: Daewoo Model No.: Puma 250B Serial # PM250233 Year: 1997 Condition: Very Good All specifications are approximations, and are subject to verification. “It is equipped with 10″ Chuck, 10 tool turret & P
                    • Swing: 24.44"
                    • Centers: 27.8"
                      Daewoo Puma 12L CNC Turning Center
                      Make: Daewoo Model No.: Puma 12L-B Serial # 440392 Condition: Very Good All specifications are approximations, and are subject to verification. “This machine is in good running condition. It is equipped with 12″
                      • Swing: 22.4"
                      • Centers: 42"
                        Daewoo Puma 1500SY CNC Turning Lathe
                        DAEWOO PUMA 1500SY CNC SUB SPINDLE LIVE TOOL C Y AXIS TURNING Lathe Make: Daewoo Model No.: Puma 1500SY Serial No.: P150SY0388 Condition: Very Good Comes with 2 X Collet Chuck, Tool Holders, Cool blaster, p
                        • Swing: 23.62"
                          DAEWOO PUMA 200LC CNC Turning Long Bed Lathe
                          DAEWOO PUMA 200LC CNC TURNING LONG BED LATHE Make: Daewoo Model No.: Puma 200LC Serial No.: PM200898 Year Installed: 2000 Condition: Very Good Comes with 5c Collet Chuck, Tailstock , Tooling &
                          • Swing: 20.1"
                            Daewoo Puma 12S-3A CNC Turn Mill
                            DAEWOO PUMA 12S-3A CNC TURN MILL Make: Daewoo Model No.: Puma 12S-3A Serial # 3P100018 Condition: Very Good All specifications are approximations, and are subject to verification. “This machine is in good run
                            • Swing: 22.4"
                            • Centers: 36"
                              Daewoo Puma 250MB CNC Turn Mill
                              DAEWOO PUMA 250MB CNC TURN MILL Make: Daewoo Model No.: Puma 250MB Serial No.: P25M0118 Condition: Very Good Comes with 12" Chuck, Tailstock & Chip Conveyor All specifications are approximations
                              • Swing: 22.4"
                                DAEWOO, PUMA 240B, 21.7" SWING, FANUC i CNTRL, CNC LATHE, NEW: 2005
                                SPECIFICATIONS: SWING OVER BED: 21.7″ SWING OVER CARRIAGE: 15.4″ BETWEEN CENTERS: 26.3” MAXIMUM TURNING DIAMETER: 13.8″ MAXIMUM TURNING LENGTH: 21.6” SPINDLE SPEED: 45 – 4,500 RPM SPINDLE NOSE: A2-6 DRAW TUBE
                                • Swing: 21.7"
                                  Condition:
                                  Manufacturer:
                                  • X Daewoo (17)
                                  Location:
                                  • X California (17)
                                  Price:
                                  •  to 
                                  1