buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Cut-off / Lasers / Flame / Plasma / Waterjet > Waterjet Cutters > Used > Flow

Used Flow Waterjet Cutters

8 used Flow waterjet cutter items for sale
1
Refine: Viewing 1 - 8 of 8 matches
Sort by:
Items Per Page:  20  |  50 |  100
2014 - 6.6' x 13' Flow Mach 4020B CNC Waterjet Cutting System
$RFQ
2014 - 6.6' x 13' Flow Mach 4020B CNC Waterjet Cutting System
Table Size 6.6' x 13' Pump 50 HP Max Cutting Pressure 75,000 PSI Power Requirement 460V, 3 Phase, 60Hz Equipped with: Flow PC Based Control Flow Hyperlife 50HP Intensifier Pump 75,000PSI Cutting Pressure
  • Output Pressure: 75000PSI
  • Motor: 50HP
    Flow Waterjet - Mach 3 w Dynamic Head
    $38,000
    Flow Waterjet - Mach 3 w Dynamic Head
    Flow waterjet, Mach 3 w dynamic head. 480V, 55K PSI, 4'x8'. 2010 model with direct drive, 30HP pump. One owner. Meticulous maintenance with records to back it up. The only issue to disclose is that the abras
    • Output Pressure: 55000PSI
    • Motor: 30HP
      13'1" x 6'6" Used Flow 5-Axis Dynamic XD CNC Waterjet Cutting System (GUARANTEED
      $109,500
      13'1" x 6'6" Used Flow 5-Axis Dynamic XD CNC Waterjet Cutting System (GUARANTEED
      Cutting Capacity 13'1" x 6'6" Maximum Operating Pressure 87,000 PSI Power 480v 3-Phase Flow CNC Controls Hyperjet 100 87,000 PSI Hyper-Pressure Intensifier Flow XD Dynamic Cutting Head 500 Lbs. Bulk
      6' x 10' Used Flow CNC Waterjet Cutting System for Foam, Gaskets, Rubber-Excellent, 1500 h
      $85,000
      6' x 10' Used Flow CNC Waterjet Cutting System for Foam, Gaskets, Rubber-Excellent, 1500 h
      Cutting Capacity 6' x 10' Rapid Traverse Maximum Up to 400 in/min Linear Straightness Accuracy +/-0.005 in/3 ft Repeatability +/-[0.0025 in.] Cutting Speed 0-400 IPM Maximum Operating Pressure 60,000 P
      4' x 4' Used Flow CNC Water Jet Cutting System (Good Running Condition, Guaranteed By Flow
      $67,500
      4' x 4' Used Flow CNC Water Jet Cutting System (Good Running Condition, Guaranteed By Flow
      Pump Output Rate 60,000 PSI Table Size 51.1" x 51.1" X Axis Travel 48" Y Axis Travel 48" Z Axis Travel 7" Horsepower 30 H.P. Flowmaster Version 6 Software 6 Bags Of Garnet Flow CNC Controller
      6' x 12' Used Flow CNC Abrasive Dual Head Waterjet Cutting System with Flow PC Based Flowm
      $49,500
      6' x 12' Used Flow CNC Abrasive Dual Head Waterjet Cutting System with Flow PC Based Flowm
      Work Envelope 144" x 78" Pump 100 H.P. Max Operating Pressure 60,000 PSI Abrasive Hopper Capacity 500 Lbs. Max Speeds 400IPM Table Size 156”x78” Flowmaster Software Package Upgrade Ver
      240" x 120" x 36" Used Flow 6-Axis Low Rail Gantry Type Water Jet, Mdl. 1-
      $RFQ
      240" x 120" x 36" Used Flow 6-Axis Low Rail Gantry Type Water Jet, Mdl. 1-
      None
      2013 FLOW MACH 2B MODEL 2031B CNC WATERJET CUTTING SYSTEM, 6.5’ X 10.2’
      $RFQ
      2013 FLOW MACH 2B MODEL 2031B CNC WATERJET CUTTING SYSTEM, 6.5’ X 10.2’
      SPECIFICATIONS INTENSIFIER PUMP: 30 HP, 60,000 PSI SPEED: UP TO 400 IPM CUTTING HEAD TECHNOLOGY: ABRASIVE WATERJET WORK ENVELOPE X-AXIS: 10.2’ Y-AXIS: 6.5’ Z-AXIS: 7” FEATURES 3-SIDED EASY ACCESS TO YOUR WORKP
      • Output Pressure: 60000PSI
      • Motor: 30HP
        Categories:
        • X machine tools (8)
        • X Cut-off / Lasers / Flame / Plasma / Waterjet (8)
        • X Waterjet Cutters (8)
        Condition:
        • X Used (8)
        Manufacturer:
        • X Flow (8)
        Location:
        Price:
        •  to 
        1