| Photo: |
Machine Detail: |
Manufacturer: |
Price: |
 | HAAS TL-2, 2006, 10" CHUCK, TAILSTOCK, STEADY REST, TOOL POST, LOW HOU
SPECIFICATIONS:
SWING OVER FRONT APRON....... 16"
SWING OVER CROSS SLIDE....... 11"
MAX. CUTTING DIAMETER........ 16"
MAX. CUTTIN | HAAS
TL-2 | $RFQ
Hunt Valley, MD, MD
United States |
 | KURAKI KHM-125, 2001, FULL 4TH, TSC, 12K RPM, PROBE, SCALES
SPECIFICATIONS:
PALLET SIZE.......... 49.2" x 49.2"
PALLET INDEXING...... FULL 4TH
NUMBER OF PALLETS.... (2)
TABLE LOAD CAPACITY.. 6,6 | KURAKI
KHM-125 | $RFQ
Hunt Valley, MD, MD
United States |
 | 3.94" KURAKI KBT-1003W HORIZONTAL BORING MILL, 1978, ROTARY TABLE, 50
SPECIFICATIONS:
SPINDLE DIAMETER................ 3.94"
TABLE WORKING SURFACE........... 41.3" X 47.2" (BUILT IN ROTARY)
MAXIMUM TA | KURAKI
KBT-1003W | $RFQ
Hunt Valley, MD, MD
United States |
 | ACCURSHEAR 65008, 2008, 1/2" x 8', 10' ARM, 16 TON HOLD DOWN,
SPECIFICATIONS:
CAPACITY................ 1/2" x 8'
KNIFE SIZE.............. 1 x 3 x 100"
HYDRUALIC HOLD DOWNS.... 13
HOLD DOWN TON | ACCURSHEAR
65008 | $RFQ
Hunt Valley, MD, MD
United States |
 | MIYANO BNA-42MSY, 2012, IEMCA BARFEEDER, Y-AXIS, LIVE MILLING, SUB SPINDLE
SPECIFICATIONS:
MAX CUTTING DIAMETER......... 14"
MAX CUTTING LENGTH........... 20.2"
X-AXIS TRAVEL................ 10.2"
Z-AXIS | MIYANO
BNA-42MSY | $RFQ
Hunt Valley, MD, MD
United States |
  Video | TOOL NORTH (10) STATION MACHINING DIAL & OFF-DIAL STATION, 2006, (2) FA
TOOL NORTH (10) STATION MACHINING DIAL & (1) OFF-DIAL STATION
NEW: 2006
EQUIPPED WITH:
(2) FANUC 18i-M CONTROLS
STATION 1:
MANUAL LOAD | TOOL-NORTH
DIAL & OFF- | $RFQ
Hunt Valley, MD, MD
United States |
 | DOOSAN LYNX 220LSY, 2017, SUB SPINDLE, Y-AXIS, CONVEYOR, PARTS CATCHER
DOOSAN LYNX 220LSY
NEW: 2017
SPECIFICATIONS:
MAX SWING OVER BED................... 23.6"
MAX TURNING DIAMETER................. 11.8" | DOOSAN
LYNX 220LSY | $RFQ
Hunt Valley, MD, MD
United States |
 | FANUC ROBODRILL T21I, 2012, ROTARY TABLE, TSC
FANUC ROBODRILL T21I FSA
NEW: 2012
SPECIFICATIONS:
TABLE DIMENSIONS.................... 24.8" X 12.99"
TABLE LOAD CAPACITY.......... | FANUC
ROBODRILL T21I | $RFQ
Hunt Valley, MD, MD
United States |
 Video | AKS ACCU-KUT, PLASMA CUTTER, 2013, (2) 120" X 72" TABLES, BEVEL H
SPECIFICATIONS:
TOTAL TABLE SIZE.............. 264" X 72" (TWO 6' X 10' TABLES)
CUTTING LENGTH (EACH TABLE)... 120"
CUT | AKS
ACCU-KUT | $RFQ
Hunt Valley, MD, MD
United States |
 | MAZAK HCN-4000II, 2011, 18,000 RPM, TSC, 120 ATC, PROBING
SPECIFICATIONS:
PALLET SIZE.................. 15.75" X 15.75"
PALLET INDEXING.............. 1-DEGREE
NUMBER OF PALLETS............ ( | MAZAK
HCN-4000II | $RFQ
Hunt Valley, MD, MD
United States |
 | 1 1/4", TSUGAMI B0325-II, 2015, EDGE BARFEED, HIGH-PRESS COOLANT, 3,00
SPECIFICATIONS:
CHUCKING BARSTOCK DIAMETER..................... 1.26"
MAX HEADSTOCK STROKE (WITH GUIDE BUSHING)...... 12.6"
MAX HEADSTO | TSUGAMI
B0325-II | $RFQ
Hunt Valley, MD, MD
United States |
 | DOOSAN HC 400 II, 2018, 12K RPM, TSC, PROBE, LIKE-NEW, 9 HOURS
INSTALLED: 2019 (MARCH)
BUILT: 2018 (JULY)
SPECIFICATIONS:
PALLET SIZE................ 15.75" X 15.75"
PALLET INDEXING............ 1 | DOOSAN
HC 400 II | $RFQ
Hunt Valley, MD, MD
United States |
 | TOS SN71B GAP BAD ENGINE LATHE, 28" X 80", INCH/METRIC THREADING
TOS MODEL SN7U1B GAP BED ENGINE LATHE
NEW: 1982
SPECIFICATIONS:
SWING OVER BED.......................... 28"
SWING OVER CROSS SLIDE...... | TOS
SN71B | $RFQ
Hunt Valley, MD, MD
United States |
 | OKUMA LB300-M/500, 1999, OSP-U100L, LIVE MILLING, 3J COLLET, CHIP BLASTER
OKUMA LB300-M/500
NEW: 1999
SPECIFICATIONS:
SWING OVER CROSS SLIDE...... 20.86"
MAX TURNING DIAMETER........ 14.57"
MAX CUTTING LEN | OKUMA
LB300M/500 | $RFQ
Hunt Valley, MD, MD
United States |
 | MAKINO V55, 1999, PRO 3, 20K RPM, THROUGH-SPINDLE COOLANT, SGI
MAKINO V55
NEW: 1999
SPECIFICATIONS:
TABLE DIMENSIONS................. 39.4" X 16.5"
X-AXIS TRAVEL.................... 35.4"
Y | MAKINO
V55 | $RFQ
Hunt Valley, MD, MD
United States |
 Video | 4.33", KURAKI KBM-11A HORIZONTAL BORING MILL, 1994, FANUC 16M, FULL 4T
SPECIFICATIONS:
SPINDLE DIAMETER......... 4.33"
TABLE SIZE (ROTARY)...... 37.40" x 41.33"
AUTOMATIC INDEX ANGLE.... 0.001
MAX | KURAKI
KBM-11A | $RFQ
Hunt Valley, MD, MD
United States |
 | YAMA SEIKI GS-4300M, 2010, FANUC, LIVE, 6.5" BAR CAPACITY, 24" CH
SPECIFICATIONS:
MAXIMUM SWING................ 30.31"
MAX TURNING DIAMETER......... 24.40"
MAX TURNING LENGTH........... 32.24" | YAMA-SEIKI
GS-4300M | $RFQ
Hunt Valley, MD, MD
United States |
 | OKUMA V100R VERTICAL LATHE, 2007, OSP-P200L, 40" CHUCK, 49" SWING
NEW: 2007
INSTALLED: NOVEMBER, 2007
SPECIFICATIONS:
MAXIMUM SWING.................... 49.21"
MAX CUTTING DIAMETER............. 39.40& | OKUMA
V100R | $RFQ
Hunt Valley, MD, MD
United States |
 Video | DOOSAN MV3016LD, 2007, FANUC, TSC, CAT 40, 5K HRS, FRESH SPINDLE
DOOSAN MV3016LD
NEW: APRIL, 2007
SPECIFICATIONS:
TABLE SIZE......... 36.2" X 16.9"
X-AXIS TRAVEL...... 30"
Y-AXIS TRAVEL. | DOOSAN
MV3016LD | $RFQ
Hunt Valley, MD, MD
United States |
 | HAAS ST-30T BIG BORE, 2012, 4" BAR CAPACITY, 12" CHUCK, TS, 2-SPE
NEW: DECEMBER, 2012
INSTALLED: 2013
SPECIFICATIONS:
SWING OVER FRONT APRON....... 31.75"
MAX CUTTING DIAMETER......... 21"
MAX | HAAS
ST-30TBB | $RFQ
Hunt Valley, MD, MD
United States |
| | | | | |