buy & sell, new & used machinery, machine tools & equipment

< Back

Action Machinery Co., Inc.


Action Machinery Co., Inc.
2320 Highland Ave
Bethlehem
PA 18002
United States

View sellers phone number
View sellers email address

Visit sellers website

Action Machinery Co., Inc. Company Overview


Over the past four decades, Action Machinery has been one of the the leading machine tool and equipment dealers in the United States.

With hundreds of state-of-the-art machines under power in our 70,000 square foot showroom, we can deliver your machine to you within a few days rather than waiting for several months.

In addition to our large inventory, we have a highly skilled and knowledgeable staff with over 215 years of combined machine tool experience. We will take the time to match you with the perfect machine to fit your needs…and your budget.

Action Machinery also sells parts for all our new machines and a complete line of machine tool accessories. Our outstanding service department will provide you with the highest level of support to ensure that your new machine runs well for years to come.

Equipment Listings by Action Machinery Co., Inc.

Viewing 61 - 80 of 444 listings
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Category:
Sub-Category:
 
Photo: Machine Detail: Manufacturer: Price:
1995 SPARTAN PHOENIX MODEL PA10 AUTOMATIC HORIZONTAL BANDSAW, 8” X 12”1995 SPARTAN PHOENIX MODEL PA10 AUTOMATIC HORIZONTAL BANDSAW, 8” X 12”
CAPACITY RECTANGULAR: 8" X 12" ROUND: 10" BLADE SIZE LENGTH: 111' 6" WIDTH/GAUGE: 1" X .035" BLADE SPE
SPARTAN-
PA10
$RFQ

Bethlehem, PA
United States
2005 PUCKMASTER MODEL 1622SE CHIP SHREDDING MACHINE, 2,500 LBS/HOUR2005 PUCKMASTER MODEL 1622SE CHIP SHREDDING MACHINE, 2,500 LBS/HOUR
SPECIFICATIONS CHIP CAPACITY: 2,500 POUNDS PER HOUR MOTOR: 30 HP MAIN PUMP: 20 GPM HYDRAULIC TANK: 80 GALLON DISCHARGE CONVEYOR: 12” WIDE INFE
Puckmaster
Shredmaster 162
$RFQ

Bethlehem, PA
United States
2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS
TRAVELS X-AXIS TRAVEL: 51.58” Y-AXIS TRAVEL: 22.04” Z-AXIS TRAVEL: 22.04” TABLE TO SPINDLE NOSE: 7.87” – 35.03” COLUMN FRONT TO TABLE CENTER
OKUMA
MA-550VB
$RFQ

Bethlehem, PA
United States
2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
SPECIFICATIONS MAXIMUM WORKING WIDTH: 50” MAXIMUM WORKING THICKNESS: 6.2” BELT MEASUREMENT: 86” X 51” MINIMUM WORKING LENGTH: 11-3/4” MAIN MOTO
PRO-STEEL
SG1300-WJS
$RFQ

Bethlehem, PA
United States
1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”
MOVEMENT & RANGES X-AXIS TRAVEL: 31.49" Y-AXIS TRAVEL: 17.32” Z-AXIS TRAVEL: 19.09" FROM PALLET SURFACE TO SPINDLE END: 5.9" –
Not Specified
RA-3F-APC
$RFQ

Bethlehem, PA
United States
SOUTHWESTERN INDUSTRIES K3 2-AXIS CNC VERTICAL KNEE MILL, 10" X 50&quoSOUTHWESTERN INDUSTRIES K3 2-AXIS CNC VERTICAL KNEE MILL, 10" X 50&quo
TABLE TABLE SIZE: 50" X 10" T-SLOT: 5/8" X 3" X 2-1/2" TABLE LOAD CAPACITY: 750 LBS TRAVEL LONGITUDINAL TRAVEL: 32&
Southwest-Trak
K3
$RFQ

Bethlehem, PA
United States
1983 CLAUSING COLCHESTER MODEL 8051 GEARED HEAD ENGINE LATHE, 17" x 601983 CLAUSING COLCHESTER MODEL 8051 GEARED HEAD ENGINE LATHE, 17" x 60
SPECIFICATIONS SWING OVER BED: 17-1/4" SWING OVER SADDLE WINGS: 17-1/4" SWING OVER CROSS SLIDE: 10-1/2" BAR CAPACITY THRU SPINDLE: 3&q
CLAUSING
8051
$RFQ

Bethlehem, PA
United States
2014 DOOSAN DNM-400II VMC,  FANUC OiMD, 30" x 17" x 20" TRAV2014 DOOSAN DNM-400II VMC, FANUC OiMD, 30" x 17" x 20" TRAV
TRAVELS X-AXIS TRAVEL: 30” Y-AXIS TRAVEL: 17.1” Z-AXIS TRAVEL: 20.1” SPINDLE CENTER TO TABLE TOP: 5.9” – 30.5” SPINDLE NOSE TO COLUMN: 20.2”
DOOSAN
DNM-400II
$RFQ

Bethlehem, PA
United States
2015 OMAX MODEL MAXIEM 1515 CNC WATERJET CUTTING, 50,000 PSI2015 OMAX MODEL MAXIEM 1515 CNC WATERJET CUTTING, 50,000 PSI
SPECIFICATIONS MATERIAL SUPPORT SLATS: 4” X 14 GA GALVANIZED STEEL MAXIMUM MATERIAL LOAD: 300 LBS/SQ FT SPEED: 500 IPM INTENSIFIER PUMP: 30 HP
OMAX
Maxiem 1515
$RFQ

Bethlehem, PA
United States
2014 DOOSAN PUMA GT-2100 2-AXIS CNC LATHE WITH FANUC OiTD CONTROL, 8” CHUCK2014 DOOSAN PUMA GT-2100 2-AXIS CNC LATHE WITH FANUC OiTD CONTROL, 8” CHUCK
CAPACITIES SWING OVER BED: 23.6” SWING OVER SADDLE: 15.4” RECOMMENDED TURNING DIAMETER: 8.3” MAXIMUM TURNING DIAMETER: 15.4” MAXIMUM TURNING LENG
DOOSAN
GT-2100
$RFQ

Bethlehem, PA
United States
2012  DOOSAN DNM-500 VERTICAL MACHINING CENTER,FANUC OiMD, 40" x 21&qu2012 DOOSAN DNM-500 VERTICAL MACHINING CENTER,FANUC OiMD, 40" x 21&qu
TRAVELS X-AXIS TRAVEL: 40.2” Y-AXIS TRAVEL: 21.3” Z-AXIS TRAVEL: 20.1” SPINDLE CENTER TO TABLE TOP: 5.9” – 30.5” SPINDLE NOSE TO COLUMN: 20.
DOOSAN
DNM-500
$RFQ

Bethlehem, PA
United States
2010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 302010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 30
TRAVELS X-AXIS: 120" Y-AXIS: 32" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120
HAAS
VF-10/40
$RFQ

Bethlehem, PA
United States
1996 HARDINGE GT-27SP GANG TOOL CNC LATHE,  FANUC 18T, 1-1/16" BAR1996 HARDINGE GT-27SP GANG TOOL CNC LATHE, FANUC 18T, 1-1/16" BAR
CAPACITIES MAXIMUM SWING: 11.063" BAR CAPACITY: 1.062" TRAVELS X-AXIS: 12" Z-AXIS: 11" X-AXIS TRAVERSE R
hardinge-
GT27SP
$RFQ

Bethlehem, PA
United States
1999 CHEVALIER FSG-2A-1224H 2-AXIS HYDRAULIC SURFACE GRINDER, 12” X 24"1999 CHEVALIER FSG-2A-1224H 2-AXIS HYDRAULIC SURFACE GRINDER, 12” X 24"
SPECIFICATIONS TABLE SIZE: 12” X 24” GRINDING LENGTH: 24" GRINDING WIDTH: 12" DISTANCE (SPINDLE CENTER TO TABLE SURFACE): 24-3/4&qu
Cheavlier
FSG-2A-1224H
$RFQ

Bethlehem, PA
United States
2007 CITIZEN MODEL A20 TYPE VI SWISS STYLE TURNING CENTER, 20 MM2007 CITIZEN MODEL A20 TYPE VI SWISS STYLE TURNING CENTER, 20 MM
SPECIFICATIONS MAXIMUM TURNING DIAMETER: .79” MAXIMUM SPINDLE SPEED (4-STEP): 8,000 RPM MAXIMUM BACK SPINDLE SPEED: 8,000 RPM MAXIMUM PART LENGT
CITIZEN
A20VI
$RFQ

Bethlehem, PA
United States
2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
TRAVELS X-AXIS: 19.7" Y-AXIS: 15.74" Z-AXIS: 20.87" TABLE TABLE SIZE: 25.6" X 15.7" LOAD CAPACITY: 660 LBS SPINDL
FANUC-
ROBODRILL α-D21
$RFQ

Bethlehem, PA
United States
2013 CNC NEW GTS-27 CNC GANG TOOL LATHE WITH FAGOR CONTROL, 1-1/16"2013 CNC NEW GTS-27 CNC GANG TOOL LATHE WITH FAGOR CONTROL, 1-1/16"
CAPACITY MAXIMUM BAR CAPACITY: 1.0625” MAXIMUM TURNING LENGTH: 7.5” MAXIMUM TURNING DIAMETER: 10” MAXIMUM SWING OVER WAYS: 13” MAIN HEADSTO
CNC-NEW-
GTS-27
$RFQ

Bethlehem, PA
United States
1988 K. O. LEE MODEL BA960 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"1988 K. O. LEE MODEL BA960 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22" DISTANCE BETWEEN WORKHEAD AND TAILSTOCK CENTERS: 16" DISTANCE BETWEEN WORKHEAD CO
KO-LEE
BA-960
$RFQ

Bethlehem, PA
United States
1994 NIAGARA MODEL HD-55-6-8 HYDRAULIC PRESS BRAKE, 55 TON X 8’1994 NIAGARA MODEL HD-55-6-8 HYDRAULIC PRESS BRAKE, 55 TON X 8’
SPECIFICATIONS CAPACITY: 55 TONS BENDING CAPACITY: 12 GA X 8’ DIE OPENING: 7/8” DISTANCE BETWEEN HOUSINGS: 6’6” OVERALL LENGTH: 8’ STROKE: 7”
NIAGARA
HD-55-6-8
$RFQ

Bethlehem, PA
United States
1975 HARDINGE MODEL HLV-H TOOLROOM LATHE,  11" X 18"1975 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18"
SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE
hardinge-
HLV-H
$RFQ

Bethlehem, PA
United States
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>