buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls

Metal Rolls for Sale

249 new & used metal rolls items for sale
1 | 2 | 3
Refine: Viewing 201 - 249 of 249 matches
Sort by:
Items Per Page:  20 |  50 |  100
Used Bertsch Initial Pinch Plate Bending Roll Model 14
$RFQ
Used Bertsch Initial Pinch Plate Bending Roll Model 14
Bending Capacity .................... 1-1/4" x 3 ft Diameter of Top Roll ................ 14" Overall Length of Top Roll .......... 4 ft. Diameter of Two Lower Rolls ......... 12" Overa
  • Roll length: 3"
  • Thickness: 1.25"
    Somo Angle Bending Roll
    $RFQ
    Somo Angle Bending Roll
    4" x 4" x 3/8" Angle Bending Capacity Specifications: Driven Shaft ...................... 120 mm Diameter 400 mm Length Tooling Dims .........
    New CT Angle Bending Roll
    $RFQ
    New CT Angle Bending Roll
    Model ARS-2.5 Capacities: Pipe.....: 2" Schedule 40 (SP) Tubing...: 2-3/4" x .080" Round (SP) : 2-3/8" x .125" Square : 2&qu
    New CT Angle Bending Roll
    $RFQ
    New CT Angle Bending Roll
    Model ARS-2.2 Capacities: Pipe.....: 2" Schedule 40 (SP) Tubing...: 2-3/4" x .080" Round (SP) : 2-3/8" x .125" Square : 2&qu
    New CT Angle Bending Roll
    $RFQ
    New CT Angle Bending Roll
    Model ARS-1.5 Capacities: Pipe.....: 1-1/2" Schedule 40 (SP) Tubing...: 2-3/8" x .080" Round (SP) : 1-1/2" x .125" Square :
    Saber X5016E Plate Roll
    $RFQ
    Saber X5016E Plate Roll
    The X5015E offers a compact design with the power of hydraulic operation. Foot Pedal includes Foward & Backward control SPECIFICATIONS Capacity(mild steel): 50" x 16ga Motor: 1hp / 1 phase Manual
    Saber X5016 Table Top Slip Roll
    $RFQ
    Saber X5016 Table Top Slip Roll
    Table Top 50" Slip Roll SPECIFICATIONS Diameter of Rolls: 3" Capacity: 50" x 18ga Wire Grooves: 3 Gear Ratio: 3:1
    Saber X3622 Slip Roll
    $RFQ
    Saber X3622 Slip Roll
    Table Top 36" Slip Roll SPECIFICATIONS Diameter of Rolls: 2" Capacity: 36" x 22ga Wire Grooves: 3 Gear Ratio: 1:1
    45 Ton Hydraulic Horizontal Press
    $RFQ
    45 Ton Hydraulic Horizontal Press
    Stroke in and stroke back is controlled with two hand wheel adjustments and also in a digital version that allows for programming several hundred complex functions. Table is made with tempered and ground steel, the carri
    45 Ton Hydraulic Horizontal Press
    $RFQ
    45 Ton Hydraulic Horizontal Press
    Stroke in and stroke back is controlled with two hand wheel adjustments and also in a digital version that allows for programming several hundred complex functions. Table is made with tempered and ground steel, the carri
    RDB- 500 Hydraulic Rotary Draw Bender
    $RFQ
    RDB- 500 Hydraulic Rotary Draw Bender
    Mild Steel schedule 40 Pipe: 3" Aluminum schedule 40 Pipe: 3.5" Stainless Steel schedule 40 Pipe: 2.5" Mild Steel Round Tube: 3" x .250 wall Aluminum Round Tube: 3.5" x .187 wall Stainless St
    RDB-350-TS Electric Programmable Bender
    $RFQ
    RDB-350-TS Electric Programmable Bender
    This tubing bender has a maximum CLR is 24" which is our largest for these machines, Touch Screen Programming with memory for 175 programs. Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3"
    RDB-250 Electric Programmable Bending Machine
    $RFQ
    RDB-250 Electric Programmable Bending Machine
    Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3" Stainless Steel schedule 40 Pipe: 2" Mild Steel Round Tube: 3" x.187 wall Aluminum Round Tube: 3.5" x.250 wall Stainless Steel
    RDB-150 Hydraulic Rotary Draw Bender
    $RFQ
    RDB-150 Hydraulic Rotary Draw Bender
    Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum Round Tube: 2.5" x .156 wall Stainless Steel Round
    RDB-125 Hydraulic Rotary Draw Bender
    $RFQ
    RDB-125 Hydraulic Rotary Draw Bender
    Our lowest price powered pipe and tube bending machine. Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum
    RDB-100 Manual Ratcheting Tube and Pipe Bender
    $RFQ
    RDB-100 Manual Ratcheting Tube and Pipe Bender
    Capacity is up to 1" schedule 40 Pipe, 1" square tubing, 1-1/2" Chromolly (up to .083 wall), up to 1-3/4" tube (.095 wall mild steel). Unique ratcheting mechanism allows you to bend easily by simply
    EDWARDS 10 Ton Pipe/Tube Bender
    $RFQ
    EDWARDS 10 Ton Pipe/Tube Bender
    * Operates Horizontal or Vertically * 180 Degree Bend Capacity * Easy To Use Hand Controls * Auto Stop Feature For Repeatable Bends * Heavy Duty Rolling and Locking Stand * Quick Disconnect Hoses * Heavy Duly All S
    BAILEIGH RH150 PYRAMID ROLL BENDING MACHINE
    $RFQ
    BAILEIGH RH150 PYRAMID ROLL BENDING MACHINE
    • All 3 Rolls are Power driven • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls and Shafts hardened & ground • Horizontal or Vertical Working Positions • Brake Motor
    BAILEIGH RH120 PYRAMID ROLL BENDING MACHINE
    $RFQ
    BAILEIGH RH120 PYRAMID ROLL BENDING MACHINE
    • All 3 Rolls are Power driven • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls & Shafts • Alloy steel Rolls and Shafts hardened & ground • Horizontal or Vertica
    BAILEIGH RH85 PYRAMID ROLL BENDING MACHINE
    $RFQ
    BAILEIGH RH85 PYRAMID ROLL BENDING MACHINE
    • All 3 Rolls are Powered • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls & Shafts • Rolls are Hardened and Ground • Horizontal or Vertical Working Positions • Bra
    BAILEIGH Roll Benders
    $RFQ
    BAILEIGH Roll Benders
    • All 3 rolls are powered by forward/reverse foot pedals • Push button up-down positioning of top roll with Digital ReadOut • Steel-Welded Construction • Hardened alloy steel shafts • Top Roll Moved Hydraulically via
    BAILEIGH Roll Bender Machines
    $RFQ
    BAILEIGH Roll Bender Machines
    • Ratcheting top roll adjustment • Cast frame . • Shafts are hardened steel • Rolls are hardened and ground steel. • Hardened Rolls for standard flat profiles included. • Rolls for round shapes are optional. • Made
    GMC Roll Bender Machines
    $RFQ
    GMC Roll Bender Machines
    Model: PRB-30HV: $3850. Diameter of rollers: 1.12" Rolling speed: 9 rpm Motor: 2 HP, 110 Volts Dimensions: 47 x 30 x 48" Weight: 620 Lbs Model: PRB-55: $5850. Diameter of rollers: 2" Roller spee
    3 in 1 Combination Machines Shear - Press Brake - Slip Rolls
    $RFQ
    3 in 1 Combination Machines Shear - Press Brake - Slip Rolls
    52 inch $1295. 40 inch $995. 30 inch $695. Shear has squaring bar, adjustable hold-downs and back gauge. Capacity: .030" (22 gauge). [shear is not meant for constant use] Press Brake with segmented upper press br
    BIRMINGHAM 3-ROLL DOUBLE-PINCH HYDRAULIC PLATE BENDING ROLL MACHINE
    $RFQ
    BIRMINGHAM 3-ROLL DOUBLE-PINCH HYDRAULIC PLATE BENDING ROLL MACHINE
    Machine Capacity Dia. of Rolls RH-0506 61" x 1/4 8" RH-0606 80" x 1/4 8" RH-0805 100" x 6 gauge 8" RH-1004 120" x 7 gauge 8" RH-0508 61&q
    CHICAGO DREIS & KRUMP 3-ROLL SINGLE PINCH HYDRAULIC PLATE BENDING ROLLS
    $RFQ
    CHICAGO DREIS & KRUMP 3-ROLL SINGLE PINCH HYDRAULIC PLATE BENDING ROLLS
    • Hydraulic powered bending roll adjustment. • Push button GO-TO Positioning of bending roll with Digital Readout for easy repeat parts. • Push button Hydraulic powered pinch roll adjustment. • Push button Hydraulic p
    BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
    $RFQ
    BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
    All 3 rolls driven hydraulically. Crowned alloy steel rolls. Foot control (not shown) with forward and reverse. Bending roll is hydraulically powered up and down with digital readout showing position. Bending roll cylind
    BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
    $RFQ
    BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
    All 3 rolls driven hydraulically. Crowned alloy steel rolls. Foot control (not shown) with forward and reverse. Bending roll is hydraulically powered up and down with digital readout showing position. Bending roll cylind
    GMC SINGLE PINCH BENDING ROLLS
    $RFQ
    GMC SINGLE PINCH BENDING ROLLS
    • 3/8", 1/2" and 5/8" grooves at one end of rolls allow rolling of wire, round rod or beaded sheet metal • Double foot pedals for forward and reverse • Machine stops when foot pedal is released • Adjust
    Electric Powered Slip Rolls Machine
    $RFQ
    Electric Powered Slip Rolls Machine
    • Rolls are turned, ground, and polished high grade carbon steel. • Gear driven top roll. • Front mounted handle to lift upper roll for to remove your parts • 3 wire grooves for rolling 5/16", 3/8", 1/2"
    Chicago Dreis & Krump Hand Operated Slip Rolls
    $RFQ
    Chicago Dreis & Krump Hand Operated Slip Rolls
    Its hard to make portable slip roll machinery that can out perform Chicago Dreis & Krump. 3 sizes to choose from. We also offer a little 12 inch long machine with 1 inch diameter rolls from another company for $345.
    5'x1/4" Saber model R-0570H, hydraulic plate bending roll
    $RFQ
    5'x1/4" Saber model R-0570H, hydraulic plate bending roll
    New Saber 5' x 9/32" Heavy Duty Hydraulic Plate Roll Model: R-0570H Made In Taiwan SPECIFICATIONS: Mild steel capacity: 5'1" x 9/32" (0.28125") Roll Diameter: 7" Pinch Adjust
    • Roll length: 61"
    • Thickness: 281"
      Diacro 24 inch slip roller
      $900
      Diacro 24 inch slip roller
      Top of the line Diacro 24 slip roller Two inch diameter rolls Calibrated rear roll Cam-actuated idler roll A great machine for a sheet metal job shop I got it from a local high school and used it in my small shop
      • Width: 24"
        6" X 6" X 7/8" BUFFALO MODEL #3 HORIZONTAL ANGLE ROLL: STOCK # 54120
        $RFQ
        6" X 6" X 7/8" BUFFALO MODEL #3 HORIZONTAL ANGLE ROLL: STOCK # 54120
        SERIAL .................... 67-6009 MODEL ..................... 3 YEAR ...................... 1967 CAPACITY LEG-OUT .......... 6" X 6" X 7/8", 60" MINIMUM DIAMETER CAPACITY - LEG-IN ......... 5" X 5" X 7/8",
        50" WIDTH 0" THICKNESS GMC PSR-5016 NEW BENDING ROLL, 50" x 16ga. 1 hp 220v
        $RFQ
        50" WIDTH 0" THICKNESS GMC PSR-5016 NEW BENDING ROLL, 50" x 16ga. 1 hp 220v
        NEW "GMC" POWER SLIP ROLL MODEL: PSR-5016 - 3PH   FEATURES: ISO 9001 certified Heavy welded all steel construction for maximum rigidity Silent electrical motor Quick release top roller Two powered
        50" WIDTH 0" THICKNESS GMC PSR-5016-1ph NEW BENDING ROLL, 50" x 16ga. 1.5 h
        $RFQ
        50" WIDTH 0" THICKNESS GMC PSR-5016-1ph NEW BENDING ROLL, 50" x 16ga. 1.5 h
        NEW "GMC" POWER SLIP ROLL MODEL: PSR-5016-1ph   FEATURES: ISO 9001 certified Heavy welded all steel construction for maximum rigidity Silent electrical motor Quick release top roller Two powered dr
        80" WIDTH 0" THICKNESS Birmingham R-0640H NEW BENDING ROLL
        $RFQ
        80" WIDTH 0" THICKNESS Birmingham R-0640H NEW BENDING ROLL
        New Birmingham 6' x 8ga Heavy Duty Hyd Bending Roll Single Pinch Type Model: R-0640H       Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" cap) SPECIF
        80" WIDTH 0" THICKNESS Birmingham R-0650H NEW BENDING ROLL
        $RFQ
        80" WIDTH 0" THICKNESS Birmingham R-0650H NEW BENDING ROLL
        New Birmingham 6' x 6ga Heavy Duty Hydraulic Plate Roll Single Pinch Type Bending Roll Model: R-0650H       Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" ca
        60" WIDTH 0" THICKNESS Birmingham R-0570H NEW BENDING ROLL
        $RFQ
        60" WIDTH 0" THICKNESS Birmingham R-0570H NEW BENDING ROLL
        New Birmingham 5' x 9/32" Heavy Duty Hydraulic Plate Roll Model: R-0570H       Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" cap) SPECIFICATIONS: Mi
        60" WIDTH 0" THICKNESS Birmingham R-0545H NEW BENDING ROLL
        $RFQ
        60" WIDTH 0" THICKNESS Birmingham R-0545H NEW BENDING ROLL
        New Birmingham 5' x 3/16" Heavy Duty Hydraulic Plate Roll Model: R-0545H          Made In Taiwan 60" x 7 Ga Mild Steel SPECIFICATIONS: Mild steel capacity: 5'1" x 0
        60" WIDTH 0" THICKNESS Birmingham R-0535H NEW BENDING ROLL
        $RFQ
        60" WIDTH 0" THICKNESS Birmingham R-0535H NEW BENDING ROLL
        New Birmingham 5' x 10ga Initial Pinch Hydraulic Plate Roll Model: R-0535H       Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" cap) SPECIFICATIONS:
        50" WIDTH 0" THICKNESS Birmingham R-0440H NEW BENDING ROLL, Heavy Duty Hydraulic
        $RFQ
        50" WIDTH 0" THICKNESS Birmingham R-0440H NEW BENDING ROLL, Heavy Duty Hydraulic
        New Birmingham 4' x 8ga Single Pinch Hyd Bending Roll Model: R-0440H             Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16
        50" WIDTH 0" THICKNESS Birmingham R-0480H NEW BENDING ROLL
        $RFQ
        50" WIDTH 0" THICKNESS Birmingham R-0480H NEW BENDING ROLL
        New Birmingham 4' x 5/16" Hydraulic Plate Roll Model: R-0480H   Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" cap) SPECIFICATIONS: Mild steel capacity: 4'3" x 4/16"
        50" WIDTH 0" THICKNESS Birmingham R-0465H NEW BENDING ROLL
        $RFQ
        50" WIDTH 0" THICKNESS Birmingham R-0465H NEW BENDING ROLL
        New Birmingham 4' X 1/4" Hydraulic Plate Roll Model: R-0465H   Made In Taiwan Note:  the photo is of model R-0545H (5' x 3/16" cap) SPECIFICATIONS: Mild steel capacity: 51" x .250"&nb
        80" WIDTH 0" THICKNESS GMC HBR-0625 *Taiwan Made* NEW BENDING ROLL, 6' x 1/4&quo
        $RFQ
        80" WIDTH 0" THICKNESS GMC HBR-0625 *Taiwan Made* NEW BENDING ROLL, 6' x 1/4&quo
        NEW GMC MODEL: HBR-0625 INITIAL PINCH HYDRAULIC PLATE BENDING ROLL MACHINE     Standard Features: ISO 9001 certified Taiwan Machines   All three rollers are driven All three rollers are hardened
        62" WIDTH 0" THICKNESS GMC HBR-0525 *Taiwan Made* NEW BENDING ROLL, 5' x 1/4&quo
        $RFQ
        62" WIDTH 0" THICKNESS GMC HBR-0525 *Taiwan Made* NEW BENDING ROLL, 5' x 1/4&quo
        NEW GMC MODEL: HBR-0525 INITIAL PINCH HYDRAULIC PLATE BENDING ROLL MACHINE     Standard Features: ISO 9001 certified Taiwan Machines   All three rollers are driven All three rollers are hardened
        51" WIDTH 0" THICKNESS GMC PBR-04316E *Taiwan Made* NEW BENDING ROLL, 4' x 3/16&
        $RFQ
        51" WIDTH 0" THICKNESS GMC PBR-04316E *Taiwan Made* NEW BENDING ROLL, 4' x 3/16&
        NEW "GMC" HEAVY DUTY BENDING ROLL MODEL: PBR-04316E MADE IN TAIWAN   STANDARD FEATURES: ISO 9001 certified 50 HRC hardened rolls for stainless steel 3 rollers are driven to perform high accuracy 3/
        51" WIDTH 0" THICKNESS GMC PBR-0412 *Taiwan Made* NEW BENDING ROLL, 4' x 12ga He
        $RFQ
        51" WIDTH 0" THICKNESS GMC PBR-0412 *Taiwan Made* NEW BENDING ROLL, 4' x 12ga He
        NEW "GMC" HEAVY DUTY BENDING ROLL MODEL: PBR-0412 MADE IN TAIWAN   STANDARD FEATURES: ISO 9001 certified 50 HRC hardened rolls for stainless steel 3 rollers are driven to perform high accuracy 3/8&
        52" WIDTH 0" THICKNESS GMC HBR-0425 *Taiwan Made* NEW BENDING ROLL, 4' x 1/4&quo
        $RFQ
        52" WIDTH 0" THICKNESS GMC HBR-0425 *Taiwan Made* NEW BENDING ROLL, 4' x 1/4&quo
        NEW GMC MODEL: HBR-0425 INITIAL PINCH HYDRAULIC PLATE BENDING ROLL MACHINE     Standard Features: ISO 9001 certified Taiwan Machines   All three rollers are driven All three rollers are hardened
        Related Subcategories:
        Categories:
        Condition:
        Manufacturer:
        Location:
        Price:
        •  to 
        1 | 2 | 3