buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls

Metal Rolls for Sale

249 new & used metal rolls items for sale
1 | 2 | 3
Refine: Viewing 101 - 200 of 249 matches
Sort by:
Items Per Page:  20 |  50 |  100
Heller EH-320D Bending Roll
$RFQ
Heller EH-320D Bending Roll
MODEL: EH-320D YEAR: 1996 HYDRAULIC (4) ROLL PLATE BENDING ROLL MATERIAL CAPACITY: 3/4" (MILD STEEL) OVERALL LENGTH OF ROLLS: 120" PRE BEND: 5/8" TOP ROLL DIAMETER: 13.78" CENTER ROLL DIAMETER:
FARMHAM 2015-EXXXX STRECH FORMING ROLL
$RFQ
FARMHAM 2015-EXXXX STRECH FORMING ROLL
60,000 P.S.I. ROLL DIAMETER: TOP ROLL . 2-11/16” BOTTOM ROLL 3-5/16” TOP ROLL LIFT MOTORS GEARED MOTOR TO SCREW LOCATED ON EACH END. WITH MANUAL OVERRIDE ADJUSTMENT MECHANICAL COUNTER FOR EACH END OF TOP ROLL BO
AMERECON INITIAL PINCH PLATE ROLLS
$RFQ
AMERECON INITIAL PINCH PLATE ROLLS
YEAR: 1999 1/4" X 5' AMERECON INITIAL PINCH PLATE ROLLS W/ POWER RR ADJUST SPECIFICATIONS: CAPACITY 5' X 1/4" MILD STEEL ROLL DIAMETER 6.7" ON ALL 3 ROLLS SPEED 12.5 F.P.M MAIN DRIVE MOTOR
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
$RFQ
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
SPECIFICATIONS: SERIAL NO .3656 CAPACITY: PRE-BEND ROLLING CAPACITY 6" X 144" OVERALL LENGTH OF ROLLS 156" TOP ROLL DIAMTER 48" BOTTOM ROLL DIAMETER 45.85"
6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
$RFQ
6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
$RFQ
5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
$RFQ
48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 3" power rolls are designed for simple operation. Standard with forward a
3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
$RFQ
3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
OPTIONAL ACCESSORIES: Cone bending device . . . . . . . . . . . . . . . . . . . . . . . . $ 700.00 Induction hardened rolls. . . . . . . . . . . . . . . . . . . . . . 880.00 Shaft extension for section bending r
3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
$RFQ
3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
TSI 3/1 STD, 3' x 1/4" equipped with cone device, extended shafts and oil tank full . . . . . . . . . . . . . . . . . . . $17,100.00 TSI 3/1 EXP, 3' x 1/4" equipped with mobile console with push buttons, co
EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
$RFQ
EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
OPTIONAL ACCESSORIES: Rolls for sch 40 pipe--2" . . . . . . . . . . . . . . . . . . . POR Inland freight from Stapleton, AL . . . . . . . . . . . . . . 800.00 Rolls for angle iron leg out/in . . . .
BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
$RFQ
BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
$RFQ
BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
$RFQ
BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
$RFQ
BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
$RFQ
BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C TECHNICAL SPECIFICATIONS: Shaft diameters--top 2" (50mm) --lower 1.6&
16 GA x 36" Niagara Initial Pinch Power Bending Roll
$2,950
16 GA x 36" Niagara Initial Pinch Power Bending Roll
16 Ga Capacity Mild Steel 36" Roll Length 3" Diameter Rolls Manual Adjustment Manual Drop End Forward/Reverse Runs Well Inspect Under Power in Our Branchburg NJ Warehouse
Bertsch M-Series Bending Rolls
$RFQ
Bertsch M-Series Bending Rolls
Bertsch M-Series Bending Rolls American made since 1879, Bertsch Bending Rolls utilize industry-leading hydraulics and electrics in both Three-Roll Initial Pinch and Four-Roll Double Pinch robust designs. Bertsch Bend
Bertsch B-Series Bending Rolls
$RFQ
Bertsch B-Series Bending Rolls
Bertsch B-Series Bending Rolls American made since 1879, Bertsch Bending Rolls utilize industry-leading hydraulics and electrics in both Three-Roll Initial Pinch and Four-Roll Double Pinch robust designs. Bertsch Bend
Used Pexto Manual Slip Roll Model 417-E
$RFQ
Used Pexto Manual Slip Roll Model 417-E
Used Pexto Manual Slip Roll Model 417-E Bending Length ..................... 42 in. Diameter of Rolls .................. 3 in. Wire Grooves ....................... 3/8", 1/2", 5/8"
New CT Initial Pinch Power Bending Roll Model IRM 2050 x 110
$RFQ
New CT Initial Pinch Power Bending Roll Model IRM 2050 x 110
New CT Initial Pinch Power Bending Roll Model IRM 2050 x 110 Bending Length ..................... 6 ft Capacity ........................... 14 ga. MS Roll Diameter ...................... 4.33 in
4-1/2" x 4-1/2" x 1/2" Roundo Hydraulic Angle Bending Roll
$RFQ
4-1/2" x 4-1/2" x 1/2" Roundo Hydraulic Angle Bending Roll
4-1/2" x 4-1/2" x 1/2" Roundo Hydraulic Angle Bending Roll Model R5 New 2002 Capacities: Angle Leg Out ......................... 4-1/2" x 4-1/2" x 1/2" Angle Leg In
BAILEIGH Plate Bending Machine PR-10500-4CNC
$RFQ
BAILEIGH Plate Bending Machine PR-10500-4CNC
CALL FOR BEST PRICING! FEATURES: The PR-10500-4CNC 4 roll plate bending machine is the ultimate in production plate rolling. It has the same bones as its sister models the PR-10500-4 and PR-10500-4NC but incorporates
122" x 1" BAILEIGH® Plate Forming Roll
$RFQ
122" x 1" BAILEIGH® Plate Forming Roll
CALL FOR BEST PRICE! FEATURES: When you need to bend 1” thick steel plate to a perfect cylinder, then look no further than the PR-101000-4 plate forming roll from Baileigh Industrial. This industrial production machi
12' X 3 1/2" BERTSCH #34 PYRAMID TYPE BENDING ROLL
$RFQ
12' X 3 1/2" BERTSCH #34 PYRAMID TYPE BENDING ROLL
NEW-1955 SPECIFICATIONS: STOCK # 111244 CAPACITY(LENGTH). . . . .: 144" CAPACITY(THICKNESS) . .: 3 1/2" X 144" MS ROLL DIAMETER . . . . . . .: 34" SPEED...........................: UP TO
  • Roll length: 144"
  • Thickness: 3.5"
    6' X 14 GA WYSONG MODEL #672 TRU CIRCLE PLATE ROLL: STOCK #59828
    $RFQ
    6' X 14 GA WYSONG MODEL #672 TRU CIRCLE PLATE ROLL: STOCK #59828
    SERIAL ........................ PR36-104 MODEL ......................... TC672 CAPACITY ...................... 14 GAUGE LENGTH OF ROLLS ............... 76-1/2" DIAMETER OF ROLLS ............. 6" AIR DROP E
    49" x 16 ga TENNSMITH® Powered Slip Roll
    $RFQ
    49" x 16 ga TENNSMITH® Powered Slip Roll
    CALL FOR BEST PRICE! FEATURES: MADE IN USA TENNSMITH'S SR48P powered slip roll combines all of the features of our SR48 initial pinch roll with the productive advantage of electric-powered drive for production f
    24" - 49" x 16 - 24 ga TENNSMITH® Manual Slip Rolls
    $RFQ
    24" - 49" x 16 - 24 ga TENNSMITH® Manual Slip Rolls
    CALL FOR BEST PRICE! FEATURES: MADE IN USA TENNSMITH'S slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel base to make an ac
    8' x1/2" COLE-TUVE® Hydraulic Double Pinch Plate Bending Roll
    $RFQ
    8' x1/2" COLE-TUVE® Hydraulic Double Pinch Plate Bending Roll
    INVENTORY BLOW OUT SALE! CALL FOR PRICE! 8' x 1/2" COLE-TUVE® Hydraulic 3-Roll Double Pinch Plate Bending Roll FEATURES: Fully hydraulic Compact design for minimal floor space Welded, the
    12' X 1-1/4" BERTSCH BENDING ROLL
    $RFQ
    12' X 1-1/4" BERTSCH BENDING ROLL
    WILL DO 1-1/4" STOCK MAX. ROLLS ................ 32" TOP ROLLER ........... 151" BOTTOM ROLERS (2) .... 146" MAIN MOTOR ........... 30 HP 220/440 VOLT 3 PHASE 2 ADDITIONAL MOTORS .. 2 HP V
    TIN KNOCKER Manual Slip Roll TK 2236
    $RFQ
    TIN KNOCKER Manual Slip Roll TK 2236
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: Here's "the beef"! Tin Knocker rolls are among the strongest in the industry. Precision machined and ground from high carbon steel, these rolls come with wir
    72" x 16 ga., NATIONAL, No. NR7216, powered, 4" rolls, 1 HP, New
    $RFQ
    72" x 16 ga., NATIONAL, No. NR7216, powered, 4" rolls, 1 HP, New
    OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 4" power rolls are designed for simple operation. Standard with forward a
    61" x 10 ga., GMC, #PBR-0510E, initial pinch, NEW
    $RFQ
    61" x 10 ga., GMC, #PBR-0510E, initial pinch, NEW
    OPTIONAL ACCESSORIES: Cone attachment (to make cone shaped parts) . . . . . . . . . . . . $ INC Three (3) grooves; 3/8", 1/2" and 5/8" on roll for bending wire . . INC EQUIPPED WITH: LED
    ERCOLINA, 2.5" x 2.5" x 1/4", CE50H3, hydraulic, 3 rolls driven, 2.5 HP mot
    $RFQ
    ERCOLINA, 2.5" x 2.5" x 1/4", CE50H3, hydraulic, 3 rolls driven, 2.5 HP mot
    OPTIONAL ACCESSORIES: Angle iron twist correction device. . . . . . . . . . . . . . . 1,400.00 Tie bar assembly. . . . . . . . . . . . . . . . . . . . . . . . 650.00 Large spiral bending attachment . . . . . .
    10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
    $RFQ
    10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
    RUBBER COVERED ROLLS ON DRIVEN AND IDLER STANDS. CENTER TO CENTER WHEEL DISTANCES - 39" TO 68-1/2" WHEEL SIZE - (3) 12" DIAMETER X 4" WIDE ROLLS (OVERALL WIDTH - 13") CAPACITY ..........
    12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
    $RFQ
    12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
    3 MOTOR MACHINE INITIAL PINCH TYPE MANUFACTURER ......... WEBB MODEL # .............. 24L MAX CAPACITY ......... 1-1/2" X 12'
    1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
    $RFQ
    1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
    SPECIFICATIONS: 1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL RATED BENDING CAPACITY 1-3/8" X 10' CAPACITY (ROLLING OVER 120" DIAMETER) . 1-5/8" X 10' PRE-BENDING
    4' x 3" LOWN MODEL #B-300 BENDING ROLL
    $RFQ
    4' x 3" LOWN MODEL #B-300 BENDING ROLL
    ROLLS ................... 4' LONG x 3" DIAMETER MAXIMUM CAPACITY ........ 16-18 GAUGE EQUIPPED WITH: MANUAL DROP END FOOT PEDAL ACTIVATION MOTOR DATA: 1 HP, 208-220/440V, 3PH, 60CYC, 1735 RPM WITH CONTROL
    MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
    $RFQ
    MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
    Diameter of Forging Dies 6" Width of Roll Dies 6" Press set up to receive flat back segmental dies Equipped with: Roll Shaft Extensions for operation Die Mounting of Overhanging Rolls Air Clutch
    AJAX MODEL #6 FORGING ROLL
    $RFQ
    AJAX MODEL #6 FORGING ROLL
    Width of Roll dies ................................. 60" Maximum roll die dia. .............................. 44" Maximum Length rolled section ...................... 82" Weight, approx. ...............
    BUFFALO #1 HORZONTAL BENDING ROLLS
    $RFQ
    BUFFALO #1 HORZONTAL BENDING ROLLS
    MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS FOUR SET OF ANGLE ROLLS MISCELANEOUS SPACE PLATES FOUR SET OD RADIOUS ROLLS 10 HP MOTOR, WIRED 3 PHASE, 60 CYCLE, 220 VOLTS
    10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
    $RFQ
    10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
    WITH TOP/BOTTOM COIL SUPPORT PEELER TABLE ROLL SIZE ......... 6"DIA X 10"WIDE BELLY ROLLS ....... 10"W X 2-1/2 DIA BOTTOM ROLL DRIVER TOP ROLL HOLD DOWN SIDE GUIDES DRIVEN BY AC MOTOR EQUIPPED
    New Tennsmith Slip Roll Model SR24
    $RFQ
    New Tennsmith Slip Roll Model SR24
    New Tennsmith Slip Roll Model SR24 Bending Length .............. 24" Diameter Rolls .............. 2" Wire Grooves: 3/16, 1/4, 5/16" Shipping Weight: 190 lbs. Note - Stand is
    • Length: 24"
      Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 1
      $RFQ
      Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 1
      Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 10 New 1975 Capacity........................... 3/8" x 7 ft ft. (Mild Steel) Roll Diameter (Upper & Lower) ..... 11.03&
      BAILEIGH Manual Roll Bender R-M10
      $RFQ
      BAILEIGH Manual Roll Bender R-M10
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Since Baileigh introduced the R-M10 in 2004, this ring roller has proved it does almost everything larger roll benders can—for a fraction of the price. Maxim
      BAILEIGH Plate Bending Machine PR-10500-4NC
      $RFQ
      BAILEIGH Plate Bending Machine PR-10500-4NC
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: PR-10500-4NC numerically controlled four roll plate bending machine is the next step in production plate rolling. This 10 foot 1/2” mild steel machine features a ne
      BAILEIGH Four Roll Plate Bending Machine PR-10500-4
      $RFQ
      BAILEIGH Four Roll Plate Bending Machine PR-10500-4
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The PR-10500-4 four roll plate bending machine has been refined over the years through extensive research and development and is considered one of the finest plate ro
      BAILEIGH Hydraulic Plate Roll PR-1003-4
      $RFQ
      BAILEIGH Hydraulic Plate Roll PR-1003-4
      CALL FOR BEST PRICING! FEATURES: The PR-1003-4 hydraulic plate roll would be the perfect for any industrial fabrication shop or sheet metal shop that has a need to roll 1/4” mild steel in 10 foot widths. The PR-100
      BAILEIGH 6 ft x 13 ga. Plate Roll PR-613
      $RFQ
      BAILEIGH 6 ft x 13 ga. Plate Roll PR-613
      CALL 386-304-3720 FOR AVAILABILITY FEATURES: The PR-613 plate roll from Baileigh Industrial is just what every HVAC shop is looking for. It has the ability to roll 13 gauge mild steel over its full 6’ length to a
      • Roll length: 72"
      • Thickness: 0.09"
        BAILEIGH Plate Roll PR-609
        $RFQ
        BAILEIGH Plate Roll PR-609
        CALL FOR BEST PRICING! FEATURES: Sometimes you need just a little more than 4’ roll forming material. This is where the PR-609 shines. The PR-609 sheet metal roller has a maximum 6' forming width, which can roll
        BAILEIGH Four Roll Plate Roll PR-603-4
        $RFQ
        BAILEIGH Four Roll Plate Roll PR-603-4
        CALL FOR BEST PRICING! FEATURES: The PR-603-4 four roll plate roll would be a great addition to any fabrication shop or sheet metal shop that has a need to roll 1/4” mild steel in 6 foot lengths. The PR-603-4 plate
        BAILEIGH Electric Slip Roll SR-5016
        $RFQ
        BAILEIGH Electric Slip Roll SR-5016
        CALL FOR BEST PRICING! FEATURES: Every fabrication shop needs the ability to roll metal. The SR-5016 electric slip roll from Baileigh Industrial is a 50 inch roll former that can roll 16 gauge mild steel with eas
        BAILEIGH Plate Roller PR-514
        $RFQ
        BAILEIGH Plate Roller PR-514
        CALL FOR BEST PRICING! FEATURES: Baileigh Industrial sheet metal equipment has always offered great value in its line of machinery, and the PR-514 plate forming machine is no exception. The PR-514 is the perfect plat
        BAILEIGH Powered Slip Roll SR-5016E
        $RFQ
        BAILEIGH Powered Slip Roll SR-5016E
        CALL FOR BEST PRICING! FEATURES: The SR-5016E powered slip roll from Baileigh Industrial is the perfect roller for any HVAC shop or general fabrication shop when sheet metal forming 16 gauge or less mild steel is
        BAILEIGH Slip Roll Machine SR-5016M
        $RFQ
        BAILEIGH Slip Roll Machine SR-5016M
        CALL FOR BEST PRICING! FEATURES: The SR-5016M manual sheet metal rolling machine has a forming width of 50" with a capacity of 16 gauge mild steel. This is a three roll machine with two driven rolls that are mad
        BAILEIGH Hydraulic Roll Bender R-H85
        $RFQ
        BAILEIGH Hydraulic Roll Bender R-H85
        CALL FOR BEST PRICING! FEATURES: Losing too much money on scrap metal? Hone your shop’s efficiency and reduce waste with this fast and accurate double-pinch ring roller. Runs on 220-volt 3-phase power.
        BAILEIGH Plate Roller PR-510
        $RFQ
        BAILEIGH Plate Roller PR-510
        CALL FOR BEST PRICING! FEATURES: A long time staple of Baileigh Industrial’s sheet metal roll forming equipment line, the PR-510 has a bending capacity of 10 gauge mild steel at its full width of 5'. The PR-510 s
        BAILEIGH Angle Roller R-H55
        $RFQ
        BAILEIGH Angle Roller R-H55
        CALL FOR BEST PRICING! FEATURES: You can operate this programmable ring roller on its back for horizontal bending of large radii or in the vertical position for smaller diameters This angle ring roller runs
        BAILEIGH Manual Slip Roller SR-3622M
        $RFQ
        BAILEIGH Manual Slip Roller SR-3622M
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The Baileigh Industrial SR-3622M manual slip roll, just like out other roll forming equipment, is built to last. This 36”, 22 gauge mild steel slip roll will be a mai
        BAILEIGH Plate Roll PR-503
        $RFQ
        BAILEIGH Plate Roll PR-503
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The PR-503 plate bending roll is a true workhorse and a staple of the Baileigh Industrial line of plate rolls The PR-503 has a maximum 61” forming width, and can rol
        BAILEIGH Hydraulic Roll Bender R-H65
        $RFQ
        BAILEIGH Hydraulic Roll Bender R-H65
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: This hydraulic roll bender offers the speed and strength of a double-pinch ring roller without the high cost of a CNC model. This pipe bender runs on 220-vol
        BAILEIGH Manual Slip Roll Machine SR-2420M
        $RFQ
        BAILEIGH Manual Slip Roll Machine SR-2420M
        CALL FOR BEST PRICING! FEATURES: Small bench top slip rolls have their place in most fabrication shops. In a lot of cases, these compact machines are more efficient to use when working on smaller projects. The SR-242
        6' 8" x 12 ga BIRMINGHAM® Hydraulic Plate Bending Roll
        $RFQ
        6' 8" x 12 ga BIRMINGHAM® Hydraulic Plate Bending Roll
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: All three rolls driven by hydraulic system Pinch Roll Cylinders Adjustment Synchrosly Pinch Roll Is Hydraulic Powered Up/down With Digital Counter For Showing Pinc
        BIRMINGHAM Power Slip Roll X-5016E-C
        $RFQ
        BIRMINGHAM Power Slip Roll X-5016E-C
        CALL FOR 386-304-3720 AVAILABILITY FEATURES: All rolls are made of polished, turned, and ground high grade carbon steel Gear-driven rolls Rigid construction for long life and precision operation. F
        BIRMINGHAM Manual Slip Rolls X-5016-C
        $RFQ
        BIRMINGHAM Manual Slip Rolls X-5016-C
        CALL FOR 386-304-3720 AVAILABILITY FEATURES: All rolls are made of polished, turned, and ground high grade carbon steel Gear-driven rolls Rigid construction for long life and precision operation. Fr
        5' 1" x 10 ga BIRMINGHAM® Hydraulic Plate Bending Roll
        $RFQ
        5' 1" x 10 ga BIRMINGHAM® Hydraulic Plate Bending Roll
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: All three rolls driven by hydraulic system Pinch Roll Cylinders Adjustment Synchrosly Pinch Roll Is Hydraulic Powered Up/down With Digital Counter For Showing Pinc
        5' (60") x 1/4" BIRMINGHAM® Initial Pinch Plate Roll
        $RFQ
        5' (60") x 1/4" BIRMINGHAM® Initial Pinch Plate Roll
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: All three rolls driven by hydraulic system Pinch Roll Cylinders Adjustment Synchrosly Pinch Roll Is Hydraulic Powered Up/down With Digital Counter For Showing Pinc
        BIRMINGHAM Manual Slip Roll X-2422-C
        $RFQ
        BIRMINGHAM Manual Slip Roll X-2422-C
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: All rolls are made of polished, turned, and ground high grade carbon steel Gear-driven rolls Rigid construction for long life and precision operation.
        4' 3" x 1/4" BIRMINGHAM® Hydraulic Plate Bending Roll
        $RFQ
        4' 3" x 1/4" BIRMINGHAM® Hydraulic Plate Bending Roll
        CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: All three rolls driven by hydraulic system Pinch Roll Cylinders Adjustment Synchrosly Pinch Roll Is Hydraulic Powered Up/down With Digital Counter For Showing Pinc
        BAILEIGH 4 ft x 13 ga. Plate Roll PR-413
        $RFQ
        BAILEIGH 4 ft x 13 ga. Plate Roll PR-413
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: Do you currently have a slip roll but are constantly being bogged down when you need to form something a little thicker. That is where the PR-413 roll former comes in. Thi
        • Roll length: 48"
        • Thickness: 0.09"
          BAILEIGH Plate Roll PR-409
          $RFQ
          BAILEIGH Plate Roll PR-409
          CALL FOR BEST PRICING! FEATURES: The PR-409 single pinch hydraulic plate roll from Baileigh Industrial is a great roll former that can form 9 gauge mild steel to a 7” ring on its full length of 4’. The PR-409 is oper
          U.S. INDUSTRIAL Initial Pinch Plate Roll USR1025
          $RFQ
          U.S. INDUSTRIAL Initial Pinch Plate Roll USR1025
          CALL FOR 386-304-3720vAVAILABILITY AND BEST PRICING! STANDARD EQUIPMENT: Heavy duty gear-motor drives top and bottom pinch rolls Powered Roll Adjustment and Manual Precision Pinch Roll Adjustment Emerge
          • Roll length: 120"
          • Thickness: 0.25"
            U.S. INDUSTRIAL Initial Pinch Plate Roll USR825
            $RFQ
            U.S. INDUSTRIAL Initial Pinch Plate Roll USR825
            CALL 386-304-3720 FOR AVAILABILITY AND BEST PRICING! STANDARD EQUIPMENT: Heavy duty gear-motor drives top and bottom pinch rolls Powered Roll Adjustment and Manual Precision Pinch Roll Adjustment Emerge
            • Roll length: 96"
            • Thickness: 0.25"
              BAILEIGH Roll Bender R-M20-110
              $RFQ
              BAILEIGH Roll Bender R-M20-110
              CALL FOR BEST PRICING! FEATURES: Rolling coils is one of the hardest thing to do inn metal forming. This is where the R-M20 comes in and makes easy work of the job. The R-M20 from Baileigh Industrial is the perfe
              BAILEIGH Plate Roll PR-403
              $RFQ
              BAILEIGH Plate Roll PR-403
              CALL FOR BEST PRICING! FEATURES: Every shop needs a good ¼” mild steel roll former and the PR-403 from Baileigh Industrial is the perfect choice. The PR-403 plate roll has a maximum 4' forming width, which c
              BAILEIGH Manual Slip Roll SR-1220M
              $RFQ
              BAILEIGH Manual Slip Roll SR-1220M
              CALL FOR BEST PRICING! FEATURES: Have you ever had a small project that your larger slip roll wouldn’t work for? That is where The SR-1220M manual slip roll from Baileigh Industrial really shines. But don’t be fooled
              GMC Bending Roll PBR-0610E
              $RFQ
              GMC Bending Roll PBR-0610E
              CALL 386-304-3720 FOR AVAILABILITY! FEATURES: ISO 9001 certified Taiwan machines All (3) rolls are hardened rolls as standard feature ( all are HR models ) 3-rollers are driven to perform high accu
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0625
              $RFQ
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0625
              CALL FOR BEST PRICING! FEATURES: ISO 9001 certified Taiwan Machines Easy swing –out top roller Standard cone attachment installed 1 each LED indicator for bending roll position Safety line all around the machi
              GMC Powered Slip Roll (1 Phase) PSR-5016-1PH
              $RFQ
              GMC Powered Slip Roll (1 Phase) PSR-5016-1PH
              CALL 386-304-3720 FOR AVAILABILITY FEATURES: ISO 9001 certified Heavy welded all steel construction for maximum rigidity Silence electrical motor Quick release top roller Two rolls are drive
              GMC Powered Slip Roll PSR-5016-3PH
              $RFQ
              GMC Powered Slip Roll PSR-5016-3PH
              CALL 386-304-3720 FOR AVAILABILITY FEATURES: ISO 9001 certified Heavy welded all steel construction for maximum rigidity Silence electrical motor Quick release top roller Two rolls are driven
              GMC Power Bending Roll PBR-0510E
              $RFQ
              GMC Power Bending Roll PBR-0510E
              CALL 386-3004-3720 FOR AVAILABILITY! FEATURES: ISO 9001 certified Taiwan machines All (3) rolls are hardened rolls as standard feature ( all are HR models ) 3-rollers are driven to perform high acc
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0525
              $RFQ
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0525
              CALL FOR BEST PRICING! FEATURES: ISO 9001 certified Taiwan Machines Easy swing –out top roller Standard cone attachment installed 1 each LED indicator for bending roll position Safety line all around the mach
              GMC Hydraulic Plate Bending Roll HBR-0808
              $RFQ
              GMC Hydraulic Plate Bending Roll HBR-0808
              CALL FOR BEST PRICING! FEATURES: ISO 9001 certified Taiwan Machines Easy swing –out top roller Standard cone attachment installed 1 each LED indicator for bending roll position Safety line all around the machi
              GMC Power Ring and Angle Roll Bender PRB-55
              $RFQ
              GMC Power Ring and Angle Roll Bender PRB-55
              CALL 386-304-3720 FOR AVAILABILITY! FEATURES: ISO 9001 Heavy Duty cast iron machine construction Hardened combination roll set for most kinds of material Special roll sets are available for pipe &
              GMC Bending Roll PBR-0425E
              $RFQ
              GMC Bending Roll PBR-0425E
              CALL 386-304-3720 FOR AVAILABILITY! FEATURES: ISO 9001 certified Taiwan machines All (3) rolls are hardened rolls as standard feature 3-rollers are driven to perform high accuracy Adjustable c
              GMC Hydraulic Power Ring and Angle Roll Bender PRB-55H
              $RFQ
              GMC Hydraulic Power Ring and Angle Roll Bender PRB-55H
              CALL 386-304-3720 FOR AVAILABILITY! FEATURES: ISO 9001 Heavy Duty cast iron machine construction Hardened combination roll set for most kinds of material Special roll sets are available for pipe &
              GMC Power Bending Roll PBR-04316E
              $RFQ
              GMC Power Bending Roll PBR-04316E
              CALL 386-304-3720 FOR AVAILABILITY! FEATURES: ISO 9001 certified Taiwan machines All (3) rolls are hardened rolls as standard feature 3-rollers are driven to perform high accuracy Adjustable c
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0425
              $RFQ
              GMC Initial Pinch Hydraulic Plate Bending Roll HBR-0425
              CALL 386-304-3720 AVAILABILITY FEATURES: ISO 9001 certified Taiwan Machines Easy swing –out top roller Standard cone attachment installed 1 each LED indicator for bending roll position Safe
              • Thickness: 0.25"
                New 5.119" x 10' cdw 4-roll hydraulic double initial pinch plate bending roll model c
                $RFQ
                New 5.119" x 10' cdw 4-roll hydraulic double initial pinch plate bending roll model c
                Item Information Class: NEW Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: CDW Model: CDW12NC—130 X 3000 Price: Request Quote/Info Year: New Length of Rolls: 10 ' (Init/Dbl Pinch or Pyramid): Init/
                4" x 10' bigstars (china - haeusler technology) 4-roll hydraulic double initial pinch
                $RFQ
                4" x 10' bigstars (china - haeusler technology) 4-roll hydraulic double initial pinch
                Item Information Class: NEW Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: BIGSTARS Model: JXW12NC-100X3050 Price: Request Quote/Info Year: New Length of Rolls: 10 ' (Init/Dbl Pinch or Pyramid): In
                Mgsrl 3000 x 130mm (10’ x 5-1/8”) 3-roll hydraulic initial pinch plate bending roll, model
                $RFQ
                Mgsrl 3000 x 130mm (10’ x 5-1/8”) 3-roll hydraulic initial pinch plate bending roll, model
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: MG Model: MG3130V Price: Request Quote/Info Year: 2009 Length of Rolls: 3050 m (Init/Dbl Pinch or Pyramid): Initial Pinch
                1.58" x 13' Wagner-dortmund 4-roll hyd. double initial pinch plate bending roll
                $RFQ
                1.58" x 13' Wagner-dortmund 4-roll hyd. double initial pinch plate bending roll
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: WAGNER DORTMUND Model: BVA 45/4 Price: Request Quote/Info Year: 1955 Length of Rolls: 13.45 ' (Init/Dbl Pinch or Pyramid)
                3000mm x 50mm (10’ x 2”) mg (italy) 3-roll hydraulic plate bending machine model ak350g
                $RFQ
                3000mm x 50mm (10’ x 2”) mg (italy) 3-roll hydraulic plate bending machine model ak350g
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: MG Model: AK-350-G Price: Request Quote/Info Return Policy: 1-Year Year: 2009 Length of Rolls: 10.17 ' (Init/Dbl Pinch
                1.6" x 10' Davi model mcb 3045 4-roll cnc double initial pinch hydraulic plate roll
                $RFQ
                1.6" x 10' Davi model mcb 3045 4-roll cnc double initial pinch hydraulic plate roll
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: DAVI Model: MCB-3045 Price: Request Quote/Info Year: 2005 Length of Rolls: 10 ' (Init/Dbl Pinch or Pyramid): Init/Dbl Pin
                10' x 1" Bertsch 3-roll pyramid type plate bending roll, model no. 18
                $RFQ
                10' x 1" Bertsch 3-roll pyramid type plate bending roll, model no. 18
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: BERTSCH Model: 18 Price: Request Quote/Info Length of Rolls: 10 ' (Init/Dbl Pinch or Pyramid): Pyramid Max Thickness: 1
                8' x 3/4" Bertsch initial-pinch type plate bending roll, model no. 11
                $RFQ
                8' x 3/4" Bertsch initial-pinch type plate bending roll, model no. 11
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: BERTSCH Model: 11 Price: Request Quote/Info Length of Rolls: 8 ' (Init/Dbl Pinch or Pyramid): Initial Max Thickness: 3/4
                Utilmac 4-roll hyd. plate bending roll
                $RFQ
                Utilmac 4-roll hyd. plate bending roll
                Item Information Class: USED Type: ROLLS, PLATE BENDING (INCL PINCH) Manufacturer: UTILMAC Model: 360 Price: Request Quote/Info Year: 2008 Length of Rolls: 3 m (Init/Dbl Pinch or Pyramid): Init. Dbl. Pinc
                New Tennsmith Power Bending Roller Model SR48P
                $RFQ
                New Tennsmith Power Bending Roller Model SR48P
                49" Bending Length 3" Roll Diameter Wire Grooves: 3/8, 1/2, 5/8 in. Minimum Forming Radius: 1-1/2" Roll Speed : 22 RPM Electrics: 230/460 Volt, 3 Phase, 3/4 HP Includes:
                • Length: 49"
                  New Tennsmith Manual Slip Roller Model SR48
                  $RFQ
                  New Tennsmith Manual Slip Roller Model SR48
                  48" Bending Length 3" Roll Diameter Wire Grooves: 3/8, 1/2, 5/8 in. Minimum Forming Radius: 1-1/2" FOB: Tennessee Delivery: 6 weeks
                  Used Pexto Power Roll
                  $RFQ
                  Used Pexto Power Roll
                  6 ft. Bending Length 2 in. Dia. Rolls Machine was modified to power and Length Call Ron , 631-467-9400 for additional info. Machine is in excellent condition FOB: Ronkonkoma, NY
                  New Amerecon Power Bending Roll Model SRD-4-160
                  $RFQ
                  New Amerecon Power Bending Roll Model SRD-4-160
                  48" Bending Length 6.3" Roll Diameter 14 fpm Rolling Speed Electric: 6 HP Roll Rotation Motor : 4 HP Roll Adjustment Motor Power rear roll adjustment Scale to indicate posi
                  • Length: 48"
                    Related Subcategories:
                    Categories:
                    Condition:
                    Manufacturer:
                    Location:
                    Price:
                    •  to 
                    1 | 2 | 3