buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14
Refine: Viewing 1301 - 1390 of 1390 matches
Sort by:
Items Per Page:  20 |  50 |  100
Somo Angle Bending Roll
$RFQ
Somo Angle Bending Roll
4" x 4" x 3/8" Angle Bending Capacity Specifications: Driven Shaft ...................... 120 mm Diameter 400 mm Length Tooling Dims .........
New CT Angle Bending Roll
$RFQ
New CT Angle Bending Roll
Model ARS-2.5 Capacities: Pipe.....: 2" Schedule 40 (SP) Tubing...: 2-3/4" x .080" Round (SP) : 2-3/8" x .125" Square : 2&qu
New CT Angle Bending Roll
$RFQ
New CT Angle Bending Roll
Model ARS-2.2 Capacities: Pipe.....: 2" Schedule 40 (SP) Tubing...: 2-3/4" x .080" Round (SP) : 2-3/8" x .125" Square : 2&qu
New CT Angle Bending Roll
$RFQ
New CT Angle Bending Roll
Model ARS-1.5 Capacities: Pipe.....: 1-1/2" Schedule 40 (SP) Tubing...: 2-3/8" x .080" Round (SP) : 1-1/2" x .125" Square :
Used FMB Mini Turbo Magazine Bar Feed
$RFQ
Used FMB Mini Turbo Magazine Bar Feed
Barstock Capacity .................... 2 mm to 25 mm Magazine Capacity .................... 20 - 1/2" Bars Max. Bar Length Capacity ............. 13 ft Bars (4200 mm) Motor & Clutch ..............
  • Maximum bar diameter: 20.5"
  • Maximum bar length: 13'
    Hankinson Air Dryer
    $RFQ
    Hankinson Air Dryer
    35 scfm @ 100 psi Electrics: 115 Volt, 1 Phase FOB: Ronkonkoma, NY
    41.7" x 118.1" Takang Hollow Spindle Lathe
    $RFQ
    41.7" x 118.1" Takang Hollow Spindle Lathe
    Reference #22661 41.7" x 118.1" Takang Hollow Spindle Lathe Age: NEW Model: Oil Country TK1070 x 3000 12" Spindle Bore Front & Rear Chucks Swing Over Bed ........................ 42.12&q
    • Swing: 42.12"
    • Spindle hole diameter: 12"
      84" x 120" Giddings & Lewis Rotary Index Table
      $RFQ
      84" x 120" Giddings & Lewis Rotary Index Table
      Reference #22514 84" x 120" Giddings & Lewis Rotary Index Table Model: Hydrostatic Table Size ............................ 84" x 120" Base Size ............................. 78" x 84
      • Diameter or width: 84"
      • Length: 120"
        Rockwell/Delta Drill, Model: 15-655, SN: 1654715
        $1,500
        Rockwell/Delta Drill, Model: 15-655, SN: 1654715
        Volt 460 HP ¾ PH 3 RPM 1725 Speeds 8 (450-4700) Swing 15”
        Crown 40RCTTS Electric Forklift SN W-73770
        $3,200
        Crown 40RCTTS Electric Forklift SN W-73770
        Capacity: 3700 lbs Mast: 24/154” Three Stage Mast Side shift Roof: 7 feet, 8 inches
        Fosdick 5” X 13” Radar Arm Drill
        $3,850
        Fosdick 5” X 13” Radar Arm Drill
        L Base w/ 2 Box Table Spindle 20 – 1406 36 RPM Speeds
        Finger Brake on a Stand
        $750
        Finger Brake on a Stand
        Specification: Bender 24” Gauge Capacity 16 Condition:
        Clark ForkTruck
        $11,000
        Clark ForkTruck
        Specifications: Capacity 8,000 Lift Height 147
        3” Heavy Duty Belt Grinder
        $1,500
        3” Heavy Duty Belt Grinder
        General Specifications: 5 Horse 8.8 Amps Condition: Good Price: F.O.B. Rochester “as-inspected” $ 1,500.00
        Brown and Sharp 618 Valumaster Horizontal Spindle Reciprocating Grinders
        $5,250
        Brown and Sharp 618 Valumaster Horizontal Spindle Reciprocating Grinders
        Brown and Sharp 618 Horizontal Spindle Reciprocating Table Surface Grinders Specifications: Table 6 x 18”
        • Table width: 6"
        • Table length: 18"
          Ballor, Code #300
          $200
          Ballor, Code #300
          Specifications: HP 1/2 Volt
          Cincinnati 2-24 Prod. Mill
          $3,800
          Cincinnati 2-24 Prod. Mill
          General Specifications: Table: 11” X 56” Voltage 220
          Linde TIG Welder, UCC-305
          $950
          Linde TIG Welder, UCC-305
          General Specifications: 300 AMP capacity Input Voltage: 230/460/single phase PH 1 w/ foot peddl
          Oster 4” Pipe Threader
          $6,500
          Oster 4” Pipe Threader
          General Specifications: 400 Volt W/ several Die Heads Condition:
          Sever-All, Abrasive Cut Off Machine, Model#2A, S/N: VA 490
          $1,400
          Sever-All, Abrasive Cut Off Machine, Model#2A, S/N: VA 490
          General Specifications: Wheel size: 24” Volt 220
          • Blade diameter: 24"
            Pexto Motorized Circular Shear
            $1,250
            Pexto Motorized Circular Shear
            General Specifications: 35” Capacity 16” Gage Condition: Good
            Niagara Power Squaring, Model 46
            $6,500
            Niagara Power Squaring, Model 46
            SPECIFICATIONS: Capacity: Nominal length of cut: 6' Thickness of Mat'l.: 1
            • Maximum thickness: 12Ga
            • Cutting length: 72"
              The Monomelt Co. Inc. 24” Hand Shear
              $1,500
              The Monomelt Co. Inc. 24” Hand Shear
              General Specifications: 24” x 16 Gauge capacity Condition: Good Price: F.O.B. Rochester “as-inspected” $ 1,250.00 Terms:
              C.P. Machine Tools Foot Shear, Model 0-5216, (New)
              $3,200
              C.P. Machine Tools Foot Shear, Model 0-5216, (New)
              Specifications: 52” x 16” gage w/ manual operated back gage 2 Support Arms Condition:
              • Maximum thickness: 16Ga
              • Cutting length: 52"
                Wisconsin Mechanical Press Brake, Model HD12
                $11,500
                Wisconsin Mechanical Press Brake, Model HD12
                S/N 67091
                Whitney Jersen, Model 416, Brake Press
                $1,750
                Whitney Jersen, Model 416, Brake Press
                Specifications: Capacity: 4 Foot x 16 Gauge Condition:
                Strippit Sonic 18/30 Fabricator, Single Station Punch
                $5,000
                Strippit Sonic 18/30 Fabricator, Single Station Punch
                SPECIFICATIONS: Capacity: 30 Ton Stock Size:
                • Tonnage: 30T
                  Pacific Model J225-8 Hydraulic Press Brake
                  $42,500
                  Pacific Model J225-8 Hydraulic Press Brake
                  General Specifications: 225 Ton x 8’ capacity With Hurco Autobend 7 control Available in January 2013 Condit
                  • Tonnage: 225T
                    The Minster OBI Press
                    $6,500
                    The Minster OBI Press
                    Specifications: Air clutch and brake Stroke 3 ½ Slide Adjustment
                    • Tonnage: 45T
                    • Stroke: 3.5"
                      Midco MR-6610, 1.5 Ton Pneumatic Punch
                      $250
                      Midco MR-6610, 1.5 Ton Pneumatic Punch
                      General Specifications: w/ food pedal operation 5 foot pedestal Condition: Good Price: F.O.B.Rochester “as-inspected”
                      • Tonnage: 1.5T
                        35 Ton Colonial C-Frame Hydraulic Straightening Press
                        $6,500
                        35 Ton Colonial C-Frame Hydraulic Straightening Press
                        Good Condition
                        • Tonnage: 35T
                          Chandler & Price Paper Cutter
                          $1,850
                          Chandler & Price Paper Cutter
                          SPECIFICATIONS: Hyd Paper Cutter 30” Manual Back Gage 30”. CONDITI
                          JLS Engineering LTD Electric Oven
                          $4,500
                          JLS Engineering LTD Electric Oven
                          General Specifications: Inside Dim: 74” FB. x 35.5” LR x 35.5” Ht. Working Temp Range: 200 to 400 deg. C
                          • Chamber width: 35.5"
                          • Chamber length: 35.5"
                            J&L Model FC-14 Optical Comparator
                            $2,500
                            J&L Model FC-14 Optical Comparator
                            SPECIFICATIONS: Diameter of Screen: 14" EQUIPPED WITH: 10X, 20x, 31.5x & 50x Lens Vertical Illuminatio
                            • Screen diameter: 14"
                              Supermax Vertical Knee Mill Model: YCM-16VS
                              $3,250
                              Supermax Vertical Knee Mill Model: YCM-16VS
                              SPECIFICATIONS: Table Size: 49 X 9 Acu-Rite III DRO Axis control 2 HP
                              • Table width: 9"
                              • Table length: 49"
                                Prodek 9” x 42” Vert. Milling Machine, Model 19-2S
                                $2,650
                                Prodek 9” x 42” Vert. Milling Machine, Model 19-2S
                                General Specifications: Kurt Style Vise 6” Variable Speeds R-8 Spindle
                                Kearney & Trecker Horizontal Knee Type Mill, Model 315-S-15 (New 1965)
                                $6,500
                                Kearney & Trecker Horizontal Knee Type Mill, Model 315-S-15 (New 1965)
                                Specifications: Table Working Surface: 15" x 68" Table Travels: Longitudinal: 34"
                                • Table width: 15"
                                • Table length: 68"
                                  Greaves 2 Cincinnate Horizontal Milling Machine
                                  $800
                                  Greaves 2 Cincinnate Horizontal Milling Machine
                                  Specifications: Table: 12" x 53" #50 NT Spindle w/ coolant w/ Arbor Support and one arbor Condition:
                                  Van Norman Hand Miller
                                  $400
                                  Van Norman Hand Miller
                                  SPECIFICATIONS: 6” x 26” table with coolant trough 440 volts/ 3-phase PRICE: F.O.B. Rochester......."as-inspected"......................$400.00
                                  Hardinge DSM 59 -Lathe
                                  $3,200
                                  Hardinge DSM 59 -Lathe
                                  Specifications: HP 1 Volt 440 PH
                                  Hardinge, DV-59 - Lathe
                                  $1,250
                                  Hardinge, DV-59 - Lathe
                                  Specifications: HP1 Volt 220 PH3
                                  LeBlond Heavy Duty Engine Lathe, Model 1610
                                  $8,500
                                  LeBlond Heavy Duty Engine Lathe, Model 1610
                                  SPECIFICATIONS: Capacity: Swing Over Bed and Carriage Wings: 20-1/2" Swing Over Compound Rest:
                                  • Swing: 20.5"
                                  • Centers: 60"
                                    SUNNEN PRECISION HONING MACHINE, Model: MBC-1802
                                    $8,500
                                    SUNNEN PRECISION HONING MACHINE, Model: MBC-1802
                                    Specifications: INTERNAL WORK DIA.RANGE WITH AUTO. SIZING 1/8" TO 2 INTERNAL WORK DIA.RANGE WITH POWER STROKE 0.060 TO
                                    • Stroke: 16"
                                      Robbins & Meyers 2 Ton Electric Hoists Type MDW, Three Hoists
                                      $1,500
                                      Robbins & Meyers 2 Ton Electric Hoists Type MDW, Three Hoists
                                      General Specifications: Capacity: 2 Ton Lift Height: 40’ Approx.
                                      • Lifting capacity: 2T
                                      • Lift height: 40'
                                        Norton #1 Tool and Cutter Grinder
                                        $1,850
                                        Norton #1 Tool and Cutter Grinder
                                        Specifications: Table 45” Condition:
                                        • Maximum workpiece diameter: 45"
                                          Thompson Hyd Surface Grinder, SN:BB6-6775
                                          $4,000
                                          Thompson Hyd Surface Grinder, SN:BB6-6775
                                          General Specifications: Kanetsu Magnetic Chuck 16 x 24 W/ coolant Spindle 7 ½ horse Voltage 440 Phas
                                          • Chuck: 24"
                                            Thompson, 6" X 18" Hydraulic Surface Grinder, Type A, Sn A21664M
                                            $1,500
                                            Thompson, 6" X 18" Hydraulic Surface Grinder, Type A, Sn A21664M
                                            Used Thompson, 6" X 18" Hydraulic Surface Grinder, Type A, Sn A21664M SPECIFICATIONS: Grinding Capacity: 6" X 18" Spindle Motor: HP, 1800 RPM Wheel Size: 12” x 5” x 1 1/2” Electrics: 220V
                                            Reid Precision Surface Grinder
                                            $2,200
                                            Reid Precision Surface Grinder
                                            Specifications: Table 6” x 12” Volt
                                            • Chuck: 14"
                                              Kent Surface Grinder
                                              $2,250
                                              Kent Surface Grinder
                                              Specifications: Table 6” X 12” Equipped With: Counter Lamp
                                              Medina, Model-A End Grinder with 10" x 15" Magnet S/N 35
                                              $2,800
                                              Medina, Model-A End Grinder with 10" x 15" Magnet S/N 35
                                              SPECIFICATIONS: Permanent Magnetic Chuck 6" X 15" Condition:
                                              SETCO, Grand Air-Rester, Heavy Duty Pedestal Double End Grinder
                                              $2,250
                                              SETCO, Grand Air-Rester, Heavy Duty Pedestal Double End Grinder
                                              General Specifications Wheel diameter 12” HP 2 Volt
                                              • Grinding wheel diameter: 12"
                                                Baldor 6” Double End Grinder & 1” Belt Sander - On same Cabinet Bench
                                                $600
                                                Baldor 6” Double End Grinder & 1” Belt Sander - On same Cabinet Bench
                                                Baldor 6” Double End Grinder, Cat: 612, 14-96 General Specifications: Voltage 115 RPM 3600 Hz
                                                • Grinding wheel diameter: 6"
                                                  Landis, Type 3R Universal Cylindrical Grinder
                                                  $12,500
                                                  Landis, Type 3R Universal Cylindrical Grinder
                                                  SPECIFICATIONS: Nominal Work Swings: 14" Nominal Dist. between Work Centers: 96"
                                                  • Swing: 14"
                                                  • Centers: 96"
                                                    One Used Blanchard 11-16, Rotary Surface Grinder, SN 11798,
                                                    $18,500
                                                    One Used Blanchard 11-16, Rotary Surface Grinder, SN 11798,
                                                    General Specifications: Spindle Motor: 15 HP, 1160 rpm Dia. of Grinding Wheel: 11” Dia. of Rot
                                                    • Chuck: 16"
                                                      Deckel GK21 Pantograph, Engraver
                                                      $5,750
                                                      Deckel GK21 Pantograph, Engraver
                                                      Specification: Working area: 360 x 200 mm (14.17” x 7.87 “) Copy table: 520 x 320 mm (20.47” x 12.60”)
                                                      • Table width: 12.6"
                                                      • Table length: 20.47"
                                                        Walker-Turner Punch Drill Press, Model D1100
                                                        $425
                                                        Walker-Turner Punch Drill Press, Model D1100
                                                        General Specifications: Table 21” x 17” w/ coolant trough Spindle taper
                                                        Powermatic Drill Model 1200
                                                        $1,800
                                                        Powermatic Drill Model 1200
                                                        General Specifications: Drill speed 300-1800 Condition: Good Price: F.O.B.Rochester “as-inspected” $ 1,800
                                                        Johansson Radial Arm Drill
                                                        $5,800
                                                        Johansson Radial Arm Drill
                                                        Specification: T- Slot Volt 440 HP
                                                        American Hole Wizard, Radar Arm Drill
                                                        $4,200
                                                        American Hole Wizard, Radar Arm Drill
                                                        General Specifications: 9” x 4 Ft Spindle speed 12 speeds (50 1500) Down feed 6 speeds (.007 - .018”) per revolution
                                                        Wheelabrator Hutson, Model HB25 30 cu. ft. Vibratory DeBurring Machine
                                                        $12,500
                                                        Wheelabrator Hutson, Model HB25 30 cu. ft. Vibratory DeBurring Machine
                                                        Specification: Capacity: 30 cu. ft. Bowl Dia:
                                                        Automatic Deburring Machine
                                                        $4,000
                                                        Automatic Deburring Machine
                                                        The distance between the brushes are adjustable to accommodate tubing from around 6” long to 48” long. It will deburr tubing from around ½” square to around 2” square. T
                                                        W. F. Wells & Sons, Model V-4012-F
                                                        $5,800
                                                        W. F. Wells & Sons, Model V-4012-F
                                                        SPECIFICATIONS & EQUIPMENT: 40” throat 12” Work Height Feet per minute meter 4-speed transmission with variable speed giving
                                                        • Throat capacity: 40"
                                                        • Height capacity: 12"
                                                          Marvel #8 Vertical Band Saw
                                                          $3,800
                                                          Marvel #8 Vertical Band Saw
                                                          General Specifications: 18” x 18” capacity Tilt 45 degrees each way Coolant 1 HP Condition: Good Price: F.O.B. Rochester “as-inspected” $ 3,800.00 Terms:
                                                          • Throat capacity: 18"
                                                          • Height capacity: 18"
                                                            Twistair Model TA-025TAN2C - 25HP Air Compressor
                                                            $2,000
                                                            Twistair Model TA-025TAN2C - 25HP Air Compressor
                                                            SPECIFICATIONS & EQUIPMENT: PSI - 125 HP - 25 Condition: Good PRICE:
                                                            • Motor: 25HP
                                                              Sullair Model 16BS-75HY-ACAC - 100 HP Air Compressor
                                                              $1,500
                                                              Sullair Model 16BS-75HY-ACAC - 100 HP Air Compressor
                                                              SPECIFICATIONS & EQUIPMENT: Hours - 70,122 HP - 100 Condition: Good PRICE:
                                                              • Motor: 100HP
                                                                Quincy 25 Hp. Air Compressor
                                                                $1,200
                                                                Quincy 25 Hp. Air Compressor
                                                                SPECIFICATIONS & FEATURES: Motor Baldor 25 Hp. Electrics: 2
                                                                • Motor: 25HP
                                                                  Hydra-Screw Air Compressor
                                                                  $650
                                                                  Hydra-Screw Air Compressor
                                                                  SPECIFICATIONS & EQUIPMENT: Hours - 63,309 HP - 30 CONDITION: In working condition PRICE: F.O.B. Rochester
                                                                  • Motor: 30HP
                                                                    Cincinnati Milacron 24C-HD CNC Slant Bed Lathe
                                                                    $RFQ
                                                                    Cincinnati Milacron 24C-HD CNC Slant Bed Lathe
                                                                    Reference #22483 Cincinnati Milacron 24C-HD CNC Slant Bed Lathe Model: 24C-HD Age: 1979 Maximum Swing ......................... 26" X-Axis Travel ......................... 20" Z-Axis Travel .....
                                                                    • Swing: 26"
                                                                      48" Rockford Hydraulic Vertical Slotter
                                                                      $RFQ
                                                                      48" Rockford Hydraulic Vertical Slotter
                                                                      Reference #22364 48" Rockford SM48 Hydraulic Vertical Slotter Age: 1963 CAPACITY: Stroke Length - Rated ................. 48" Maximum Stroke of Ram ................. 52.75" Minimum Stroke of Ra
                                                                      62" BERTHIEZ TVM 125,75" SWING,125 HP,LIVE MILLING,FANUC 15, 1997,20 ATC,400 RPM
                                                                      $RFQ
                                                                      62" BERTHIEZ TVM 125,75" SWING,125 HP,LIVE MILLING,FANUC 15, 1997,20 ATC,400 RPM
                                                                      TABLE DIAMETER.......................... 62" MAXIMUM SWING........................... 75" HEIGHT UNDER RAIL....................... 4
                                                                      • Swing: 75"
                                                                        66" Campbell Twin Spindle CNC Vertical Universal Grinder
                                                                        $RFQ
                                                                        66" Campbell Twin Spindle CNC Vertical Universal Grinder
                                                                        Reference #21954 66" Campbell Twin Spindle CNC Vertical Universal Grinder Model: G22 Age: 1983 Campbell 4-Axis CNC Control Diameter Of Table .................... 66" Maximum Swing ............
                                                                        • Swing: 82"
                                                                        • Table diameter: 66"
                                                                          Ingersoll Double Column 5-Axis CNC Gantry Mill
                                                                          $RFQ
                                                                          Ingersoll Double Column 5-Axis CNC Gantry Mill
                                                                          Reference #21946 Ingersoll Double Column 5-Axis CNC Gantry Mill Age: 1990 Model: Master Head Fixed Rail, Travelling Gantry TRAVELS: X-Axis, Gantry Travel ................. to 1200" Y-Axis, Horizontal
                                                                          • Distance between houses: 216.53"
                                                                            MAAG HSS-60BC Gear Grinder
                                                                            $RFQ
                                                                            MAAG HSS-60BC Gear Grinder
                                                                            Reference #21410 MAAG HSS-60BC Gear Grinder Serial No.: 6601 Age 1976 Max. Gear Width ....................... 12.59" Max. Module ........................... 15 Min. Module ........................... 2
                                                                            • Maximum face width: 12.59"
                                                                              78"/157" Kobe Diesel CNC Vertical Boring Mill
                                                                              $RFQ
                                                                              78"/157" Kobe Diesel CNC Vertical Boring Mill
                                                                              Reference #21609 78"/157" Kobe Diesel CNC Vertical Boring Mill Age 2012 Rebuilt & Retrofit 2012 Model: LS 20/40 Travelling Column Type Fanuc 16Ti CNC Controls Ram Head w/ 12-Station ATC Tab
                                                                              • Swing: 157.5"
                                                                                147" x 866" Wagner Roll Lathe
                                                                                $RFQ
                                                                                147" x 866" Wagner Roll Lathe
                                                                                Reference #21555 147" x 866" Wagner Roll Lathe Age 1994 Model: BNK 710 Maximum Swing ......................... 147" Maximum Swing Over Carriage ........... 124" Distance Between Centers
                                                                                • Swing: 147"
                                                                                • Centers: 866"
                                                                                  Vintage American Band Saw Co. B36 Band Saw
                                                                                  $1,750
                                                                                  Vintage American Band Saw Co. B36 Band Saw
                                                                                  American Band Saw Co. B36 band saw. All hand knobs and cranks turn well and blade goes around. It appears to be in operational condition. *NO ENGINE*
                                                                                  • Throat: 36"
                                                                                  • Blade: 1.5"
                                                                                    T-Slotted Floor Plates (2) 90" x 215" Cast Iron Construction
                                                                                    $RFQ
                                                                                    T-Slotted Floor Plates (2) 90" x 215" Cast Iron Construction
                                                                                    Reference #21430 T-Slotted Floor Plates (2) 90" x 215" Cast Iron Construction Overall Width ......................... 90" Overall Length ........................ 215" Thickness ..............
                                                                                    • Width: 90"
                                                                                    • Length: 215"
                                                                                      MAAG SH450/500S Large Capacity Gear Shaper
                                                                                      $RFQ
                                                                                      MAAG SH450/500S Large Capacity Gear Shaper
                                                                                      Reference #20852 MAAG SH450/500S Large Capacity Gear Shaper FEATURES: 69" Dia. Built-In Rotary Table 138" Dia. Additional Table / Sub Plate 186" Dia. Additional Table / Sub Plate JVE Internal Atta
                                                                                      • Maximum gear diameter: 206"
                                                                                        MAAG SH250 Large Capacity Gear Shaper
                                                                                        $RFQ
                                                                                        MAAG SH250 Large Capacity Gear Shaper
                                                                                        Reference #20851 MAAG SH250 Large Capacity Gear Shaper FEATURES: Allen Bradley PLC Retrofit in 1999 44" Dia. Built In Rotary Table 95" Dia. Additional Table/ Sub Plate 112"Dia. Additional Table /
                                                                                        • Maximum gear diameter: 98"
                                                                                          40" x 393" Waldrich Roll Grinder
                                                                                          $RFQ
                                                                                          40" x 393" Waldrich Roll Grinder
                                                                                          Reference #16420 40" x 393" Waldrich Roll Grinder Model: WSIII40 Age 1966 Maximum Work Diameter ................. 40" Minimum Work Diameter ................. .75" Distance Between Cente
                                                                                          • Centers: 393"
                                                                                            5.9" Scharmann CNC Table Type Horizontal Boring Mill
                                                                                            $RFQ
                                                                                            5.9" Scharmann CNC Table Type Horizontal Boring Mill
                                                                                            Reference #17496 5.9" Scharmann CNC Table Type Horizontal Boring Mill Age 1995 Model: Heavycut 1Z/TDV3 165-Station Automatic Tool Changer 3-Station Automatic Head Changer 3-Pallet "B-Axis" Shu
                                                                                            • Spindle diameter: 5.9"
                                                                                            • X axis travel: 118.11"
                                                                                              Waldrich Siegen CNC 5-Face Planer Mill
                                                                                              $RFQ
                                                                                              Waldrich Siegen CNC 5-Face Planer Mill
                                                                                              Reference #19623 Waldrich Siegen CNC 5-Face Planer Mill Age: 1982 CNC Retrofit In 1998 Model: V/H-37 Double Housing Allen Bradley System 9 CNC Control (New 1998) TRAVELS: X-Axis Table Travel ..........
                                                                                              • Distance between houses: 98.125"
                                                                                              • Table travel: 539.37"
                                                                                                72" x 72" Giddings & Lewis CNC Rotary Table & Infeeding S
                                                                                                $RFQ
                                                                                                72" x 72" Giddings & Lewis CNC Rotary Table & Infeeding S
                                                                                                Reference #19686 72" x 72" Giddings & Lewis CNC Rotary Table & Infeeding Slide Age: 2001 Model:360P ROTARY TABLE: Table Size: ............................ 72" x 72" B-Axis Rotat
                                                                                                78" x 108" Skoda Infeeding Rotary Table
                                                                                                $RFQ
                                                                                                78" x 108" Skoda Infeeding Rotary Table
                                                                                                Reference #18028 (D 17644) 78" x 108" Skoda Infeeding Rotary Table Age 1963 Model: E20 Rotary Table Size .................... 78.74" x 108.26" Table Travel on Bed ..........
                                                                                                Sutter Alpha 1 Spiral Duct Machine
                                                                                                $RFQ
                                                                                                Sutter Alpha 1 Spiral Duct Machine
                                                                                                Reference #18829 Sutter Alpha 1 Spiral Duct Machine Serial No.: 20-4 Model: Alpha 1 Capacity .............................. 18 Gauge Coil Width ............................ 2.5"- 6.5" Approximate
                                                                                                • # Stands: #5
                                                                                                  Gould & Eberhardt Gear Hobber
                                                                                                  $RFQ
                                                                                                  Gould & Eberhardt Gear Hobber
                                                                                                  Reference #19028 GOULD & EBERHARDT 96H Gear Hobber Age: 1952 S/N: 6470A2 CAPACITY: Max. Rated Pitch ...................... 1.5DP Max. Face Capacity For Spur Gears ..... 54" Max. Dia. Cap., w/o Suppo
                                                                                                  • Maximum face width: 48"
                                                                                                    Klingelnberg 10-Axis CNC Gear Cutting Machine
                                                                                                    $RFQ
                                                                                                    Klingelnberg 10-Axis CNC Gear Cutting Machine
                                                                                                    Reference #16326 Klingelnberg 10-Axis CNC Gear Cutting Machine FEATURES: 10-Axis CNC Control Suited For Medium & Large Spiral Bevel & Hypoid Gears 23.6" Maximum Workpiece Diameter Designed High De
                                                                                                    • Maximum gear diameter: 23.6"
                                                                                                      Coil Matic Feeder & Straightening Machine
                                                                                                      $RFQ
                                                                                                      Coil Matic Feeder & Straightening Machine
                                                                                                      Reference #19109 Coil Matic Feeder & Straightening Machine Age: 1980 Serial No.: 0157 Model: XCFA 3030 Capacity ............................. .030-.125 Maximum Material Width ............... 30"
                                                                                                      94" Skoda/Blansko Vertical Boring Mill
                                                                                                      $RFQ
                                                                                                      94" Skoda/Blansko Vertical Boring Mill
                                                                                                      Reference #19300 98.42" Skoda/Blansko SK25A Vertical Boring Mill Serial Number: 728679 FEATURES: 2-Swivelling Rams Side Head Threading & Taper Turning CAPACITY: Table Diameter ..................
                                                                                                      • Swing: 106.42"
                                                                                                        60 ton, Rousselle Straight Side Press, Model 6SS44
                                                                                                        $RFQ
                                                                                                        60 ton, Rousselle Straight Side Press, Model 6SS44
                                                                                                        Used Rousselle Staight Side Double Crank Press Model 6SS44 Tonnage ........................ 40 Ton Stroke ......................... 2 in. Shut Height .................... Ram Adjustment ................. 3 in. Bed
                                                                                                        • Tonnage: 60T
                                                                                                        • Stroke: 2"
                                                                                                          Categories:
                                                                                                          Condition:
                                                                                                          Manufacturer:
                                                                                                          Location:
                                                                                                          • X New York (1390)
                                                                                                          Price:
                                                                                                          •  to 
                                                                                                          <Prev | 11 | 12 | 13 | 14