buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 851 - 900 of 1487 matches
Sort by:
Items Per Page:  20 |  50  |  100
OKK VM5ii
$RFQ
OKK VM5ii
SPECIFICATIONS Table Size 41.3” x 22.0” X Axis Travel 40.0” Y Axis Travel 20.0” Z Axis Travel 20.0” Spindle Horsepower 20 Hp Spindle RPM (Vari-Speed) 8,000 RPM Spindle Taper CAT40 Tool Changer Capacity 20
  • X axis: 40"
  • Y axis: 20"
    DEVLIEG 4B-120 JIG MILL (1962)
    $RFQ
    DEVLIEG 4B-120 JIG MILL (1962)
    Specifications Spindle Diameter: 4" Spindle Nose Taper: #50 (with Power Draw Bar) Spindle Travel: 60" - Vertical (Y-Axis) 20" - Horizontal (16) Spindle Speeds: 21 - 1000 RPM (6) Spindl
    Studer S36 CNC Cylindrical Grinder (1998)
    $RFQ
    Studer S36 CNC Cylindrical Grinder (1998)
    Specifications: Distance Between Centers: 39.4" Center Height: 6.9" Max. Workpiece Weight Between Centers: 286 Lbs Cross Slide (X): Max Travel: 10.5" Speed: 197 ipm Resolution:
    STAR ST-38P* Swiss Type CNC Lathe (2011)
    $RFQ
    STAR ST-38P* Swiss Type CNC Lathe (2011)
    *P specification has the ability to set the pitch error compof the ball screws Equipped with: LNS Sprint 542 magazine Bar Loader (12') w/ 3 guide channel and pusher sets 3 Turrets Sub Spindle Full C axis Y axis To
    250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
    $RFQ
    250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
    84" x 54" BED AREA 12" STROKE 30" SHUT HEIGHT 12" POWER RAM ADJUSTMENT 20-40 STROKES PER MINUTE 31" WINDOWS FLOOR STANDING CUSHION AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES T-SLOTTED RAM AND BOLSTER LIGHT CURT
    • Tonnage: 250T
    • Tonnage: 250T
    • Tonnage: 250T
      Mori Seiki SH 63
      $RFQ
      Mori Seiki SH 63
      PALLETS (X) 24.8" X 24.8" LOAD CAPACITY 2640 LBS PALLET CHANGING TIME 15 SEC TABLE INDEXING TIME 2.3 SEC TABLE INDEXING 1-DEGREE CUTTING FEEDRATES 0.01-630 IPM RAPID TRAVERSE RATE XYZ 12
      • X axis: 33.12"
      • X axis: 33.12"
      • X axis: 33.12"
        Feintool SA Blanking Press GKP-F-320 (1975)
        $RFQ
        Feintool SA Blanking Press GKP-F-320 (1975)
        Specification Total Main Ram Force 320 Tons Stroke 63 mm (2.48") Number of strokes max. 40 / min Ram adjustment 130 mm (5.11") V-RING: Nominal force 100 Tons Stroke 25 mm (1") COUNTER RAM: Nominal force
        • Tonnage: 320T
        • Stroke: 2.48"
          Cincinnati 230AS Hydraulic CNC Press Brake (1986)
          $RFQ
          Cincinnati 230AS Hydraulic CNC Press Brake (1986)
          Specifications: Tonnage Capacity:........................................... 230 Tons Overall Length of Bed and Ram:................ 192" (16' 0") Distance Between Housings:...................... 174" (14' 6") Stro
          • Tonnage: 230T
            C.R. ONSRUD MODEL F122HD15
            $RFQ
            C.R. ONSRUD MODEL F122HD15
            Dual FIVE-AXIS Extreme Duty Series (62″X122” axis travel) – with: Thick Cast-Iron Fixed Bridge & Cast Iron Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Brid
            KOMO CNC ROUTER-VR 510TG
            $RFQ
            KOMO CNC ROUTER-VR 510TG
            Komo VR 510TG CNC Router, 10 stations, 5 ft. x 10 ft. table, 3 phase, 48v, vari-speed 626 MC5 Vector Control w/Dynaseal vac pump, Heviduty 30KVA 3 phase transformer GE Fanuc readout. Equipped with HSD 13.4 HP spindle; HS
            TOS WHN 13A
            $RFQ
            TOS WHN 13A
            Model # WHN 13A NO 007-17 Travels: X-120" Y-75" W-40" RPM: 1000 ,Rapid 5,000, Max Fee rate 900 Controller: Heidenhain TNC 415B Table Capacity: 30,000 LBS
            • Spindle diameter: 120"
              Hurco VTXU (2006)
              $RFQ
              Hurco VTXU (2006)
              Specifications: X-Axis: 31.5" Y-Axis: 27.5" Z-Axis: 20" Number of Axis: 5 Table Size: 24" x 20.9" Max Weight On Table: 880 lbs Max Part Diameter: 21.7" Spindle Speed: 12,000 rpm Spindle Motor: 24 hp Rapid Tra
              • X axis: 31.5"
              • Y axis: 27.5"
                DOOSAN PUMA 400LC (2012)
                $RFQ
                DOOSAN PUMA 400LC (2012)
                Chuck Size 20.9" Max Diameter Bar Capacity 6.5" Max Swing Over Bed / Carriage 30.3" / 23.2" Max Turning Diameter (Max / Std) 21.7" / 15" Distance Between Centers 86" Max Machining Length 81.7" Spindle S
                MORI SEIKI NLX-2500MC / 700 (2012)
                $RFQ
                MORI SEIKI NLX-2500MC / 700 (2012)
                Chuck Size 10" Max Diameter Bar Capacity 3.1" Max Swing Over Bed / Cover / Carriage 31" / 23" / 21.3" Max Turning Diameter (Max / Std) 14.4" / 10.6" Max Machining Length 27.7" Spindle Motor 24.7 / 20 HP
                Midbrook Two-Stage Hurricane Parts Washer (2011)
                $RFQ
                Midbrook Two-Stage Hurricane Parts Washer (2011)
                Electrics: Supply voltage: 480VAC/3P/60hz Total Connected HP: 45.275 Total Motor FLA: 67.94 Amps Total Connected KW: 147.08 Estimated full load Amps: 195 Main Fuse or Breaker: 250 amps Plant Fuse or Breaker: 250 a
                DMG DML 80 PowerShape Laser System (2005)
                $RFQ
                DMG DML 80 PowerShape Laser System (2005)
                Equipped With: Rofin-Sinar RS 100 DP Q-Switched Diode-Pumped Nd:YAG Laser (100 Watt) Integrated Laser Control with 2-Axis Galvo = 181 mm flat field lens 225 mm working distance LASERSOFT PowerDrill LASERSOFT Power
                Komo VMC50 (1995)
                $RFQ
                Komo VMC50 (1995)
                Table: Table Size: 32" x 123" Maximum Table Load: Unlimited Travels: X-Axis Travel: 120" Y-Axis Travel: 32" Z-Axis Travel: 32" Spindle: Spindle Speeds - Maximum: 3,500 RPM Spindle Taper: CAT 50 Taper Main Motor
                • X axis: 120"
                • Y axis: 32"
                  Ganesh TY5040CNC (2011)
                  $RFQ
                  Ganesh TY5040CNC (2011)
                  Capacity: Swing over the bed: 52" Swing over Cross Slide: 36.20" Center Height: 25.60" Bed width of ways: 35.40" Spindle Spindle Bore.: 10.04" Spinde Nose: A2-15 Spindle Motor (Peak / 30 minute): 40 HP / 30 HP S
                  • Swing: 52"
                  • Spindle hole diameter: 10.04"
                    Franklin HD-145 (2006)
                    $RFQ
                    Franklin HD-145 (2006)
                    Specifications: Maximum Beam weight/foot: 300 lbs Maximum Beam Depth: 40'' Minimum Beam Depth: 6'' Beam feed rate in X-Axis (maximum): 100 FPM Rapid Advance (Web): 420 IPM Rapid Advance (Flanges): 420 IPM Retract
                    Haas ST40 (2012)
                    $RFQ
                    Haas ST40 (2012)
                    Capacity: Swing: 35.4" Swing Over Cross Slide: 25.5" Max. Turning Length (without workholding): 44.0" Spindle: Spindle Speeds (RPM): 2400 RPM Spindle Bore: 4.62 " Bar Work Capacity (Thru Draw Tube).: 4.0" Spindle
                    • Swing: 35.4"
                    • Centers: 44"
                      Ganesh Cyclone CY32 (2011)
                      $RFQ
                      Ganesh Cyclone CY32 (2011)
                      AXIS TRAVELS: CNC Controlled Axis: 4 (X,Y,Z,&C) X-Axis Travel (Vertical Tool): 7.5" Y-Axis Travel (Cross Tool): 11.4" Z-Axis Travel (Sliding Headstock): 6.5" C-Axis Travel (Rotational Axis): 360,000 radial pos. SPI
                      • Spindle hole diameter: 1.25"
                        KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                        $RFQ
                        KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                        Table Size 37.40"X 41.34" Spindle Diameter 4.3" Spindle Speed 3-3000 RPM Spindle Speed Range 2 Table Top To Spindle Center 0-47.24 Table Center To Spindle Nose 13.98"-41.54" Axis Travels X – Axis 59.06”
                        • Spindle diameter: 59.06"
                          Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                          $RFQ
                          Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                          Specifications: Table: 65” x 33” Table working surface: 55” x 24” Travels: 41” x 26” x 22” Spindle taper: Cat 50 Spindle speeds: 3500 Spindle HP: 20 HP ATC: 20 Cutting speeds: 0.010
                          • X axis: 41"
                          • Y axis: 26"
                            HAAS HL-6 (1998)
                            $RFQ
                            HAAS HL-6 (1998)
                            EQUIPPED WITH: Haas CNC Control, Programmable Tailstock, 10 Position ID/OD Tool Turret,Heavy Duty Slant Bed Construction, High/Low Spindle Range, Tooling Package, Chip Conveyor and Coolant System. CATALOGUE SPECIF
                            • Swing: 40"
                            • Centers: 51"
                              60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                              $RFQ
                              60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                              Specifications: Tonnage Capacity:.......................................................................................................... 60 Tons Overall Length of Bed and Ram:........................................
                              • Tonnage: 60T
                                Doosan VM 3016LHs (2008)
                                $RFQ
                                Doosan VM 3016LHs (2008)
                                STANDARD FEATURES Fanuc 21 i-MB Control 20,000 RPM spindle Powerful 11 /18.5 kW (15 I 25 hp) spindle motor Cartridge spindle design High precision spindle with two double-row cylindrical bearings and two angular c
                                • X axis: 30"
                                • Y axis: 16.1"
                                  CLAUSING GB70 HYDRAULIC FABRICATOR
                                  $RFQ
                                  CLAUSING GB70 HYDRAULIC FABRICATOR
                                  CAPACITY ................. 70 TON THROAT DEPTH ............. 9" OPEN HEIGHT .............. 14" STROKE LENGTH ............ 7" RAM SHAFT DIAMETER .....
                                  • Tonnage: 70T
                                  • Throat: 9"
                                    Rapid 2436-C Series Grinder
                                    $RFQ
                                    Rapid 2436-C Series Grinder
                                    Throat Size 24 in. x 36 in. Calmount Control Panel Cat. # KIM43035-3 35 KVAR 480 Volts 3 Phase 60 Hz. Motor: Automotive Industry (High Efficiency Motor Series) 3 Phase 125TE HP 1
                                    MAZAK ST50N/3000U (2008)
                                    $RFQ
                                    MAZAK ST50N/3000U (2008)
                                    SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                    • Swing: 31.69"
                                      Devlieg CNC Horizontal Boring Mill, 65K72 (1984)
                                      $RFQ
                                      Devlieg CNC Horizontal Boring Mill, 65K72 (1984)
                                      SPECIFICATIONS: X Axis Travel 72" Y Axis Travel 60" Z Axis Travel (Spindle) 26" Table Width: 50" Table Length: 72" Spindle Motor 30 HP
                                      • Spindle diameter: 72"
                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                        $RFQ
                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                        70 TON / 1'' THRU 7/8' FOOTSWITCH, LOT OF TOOLING, 16'' X 36'' BED
                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                        $RFQ
                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                        EQUIPPED WITH: DHS Die Heat System T-Slotted Bed And Ram (12" Spacing of Slots) Dual Palm Button Pedestal Control Stand Self Contained Hydraulic System Light Curtains CATALOGUE SPECIFICATIONS: Tonnage Ca
                                        • Tonnage: 300T
                                        • Stroke: 24"
                                          EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                          $RFQ
                                          EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                          X-axis, transverse adjustment mm: 360/ 14.7" Y-axis, height adjustment mm: 150/ 5.9" Z-axis, infeed stroke mm: 230/ 9.05" Axis resolution mm: 0,0001/ 0.000004"
                                          Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                          $RFQ
                                          Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                          Specifications: Maximum Swing 26.50" Maximum Machining Diameter 14.750" Maximum Bar Work Capacity 3" Maximum Machining Length 21.275" Main Spindle Chuck Size 10" Maximum Speed 6000 rpm Motor 35 H.P.
                                          • Swing: 26.5"
                                          • Centers: 21.275"
                                            Pacific 300D8-42
                                            $RFQ
                                            Pacific 300D8-42
                                            Specifications; Type - Straight Side Hydraulic Bed - 96" x 42" Slide - 96" x 42" (108" between uprights) Speeds - 215 IPM (Rapid approach) - 25 IPM (Press) - 132 IPM (Rapid return) Stroke - 24" Max. Open h
                                            • Tonnage: 300T
                                            • Stroke: 24"
                                              Johnford VMC-2024 (1996)
                                              $RFQ
                                              Johnford VMC-2024 (1996)
                                              SPECIFICATIONS Spec Inch Year 1996 Control Fanuc 0-M Table Size 83"x34" Travels (X) 80" Travels (Y) 35" Travels (Z) 31" Spindle Taper CAT 40 Spindle Speed 6,000 RPM Machine Weight 36,000 lbs Number of
                                              • X axis: 80"
                                              • Y axis: 35"
                                                MAZAK ST50N/3000U (2008)
                                                $RFQ
                                                MAZAK ST50N/3000U (2008)
                                                SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                                • Swing: 31.69"
                                                  Kitamura Bridgecenter 8F (2006)
                                                  $RFQ
                                                  Kitamura Bridgecenter 8F (2006)
                                                  Specifications: Table Table Size 35.5" x 98.5" Table Load Capacity 6,600 lbs T-Slots (7) x 18mm Travels X-Axis Travel 80" Y-Axis Travel 42.7" Z-Axis Travel 28" Table Surface to Spindle Nose 9.9" - 37.9" Spindl
                                                  • X axis: 80"
                                                  • Y axis: 42.7"
                                                    ROMI M-23 (2005)
                                                    $RFQ
                                                    ROMI M-23 (2005)
                                                    CENTER HEIGHT................................................................. 11.42" DISTANCE BETWEEN CENTERS...................................... 120" SWING OVER BED .................................................
                                                    Kuraki KBT-13DXA (1993)
                                                    $RFQ
                                                    Kuraki KBT-13DXA (1993)
                                                    Specifications: X-Longitudinal Table Travel 118.11”, Y-Spindle Vertical Travel 78.74”, Z-Column Cross Travel 51.18”, W-Spindle Axial Travel 27.56”, Table Size 63” X 70.87”, Max Loading Weight on Table 22,000 l
                                                    • Spindle diameter: 5.12"
                                                    • X axis travel: 118.11"
                                                      Jet Edge HR612 (2008)
                                                      $RFQ
                                                      Jet Edge HR612 (2008)
                                                      Specifications: Travels –X-Axis: 144" - Y-Axis: 72" - Z-Axis: 12" Intensifier Output:60,000 PSI Flow Rate: 1.1 GPM Motor: 50 HP 3/60 Accuracy: +/- 0.001" Contouring Speed: 750"
                                                      CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                      $RFQ
                                                      CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                      SPECIFICATIONS: CONTROL TYPE...............................: DELTA TAU (3) DIMENSIONAL TABLE SIZE.................................: 128" x 430" (X) TRAVEL ................................: 400" (Y) TRAVEL ...........
                                                      • X axis: 400"
                                                      • Y axis: 128"
                                                        Mazak HTC400 (1996)
                                                        $RFQ
                                                        Mazak HTC400 (1996)
                                                        X Axis Travel 22.05" Y Axis Travel 20.08" Z Axis Travel 20.08" Pallet Size ( 2 ) 15.7" X 15.7" Chip conveyor not included 24 tool, 10,000 rpm spindle, Cat 40 When powered up, this alarm appears when trying t
                                                        • X axis: 22.05"
                                                        • Y axis: 20.08"
                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                          $RFQ
                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                          Quincy Air Compressor
                                                          $RFQ
                                                          Quincy Air Compressor
                                                          240 Gallon Tank 25HP 3 phase
                                                          MATTISON 36X8FT
                                                          $RFQ
                                                          MATTISON 36X8FT
                                                          COMING SOON
                                                          MATTISON 24X8FT
                                                          $RFQ
                                                          MATTISON 24X8FT
                                                          COMING SOON
                                                          KALAMAZOO 1220D
                                                          $RFQ
                                                          KALAMAZOO 1220D
                                                          KALAMAZOO 1220D
                                                          Ingersoll Rand 2545
                                                          $RFQ
                                                          Ingersoll Rand 2545
                                                          T-30 Ingersoll Rand 2545 series is a heavy duty air compressor mounted on a large ASME horizontal air tank complete with drain valve and safety valve factory mounted. The cast iron pump is rated for 35 CFM and a factory
                                                          Curtis Teledo Air compressor
                                                          $RFQ
                                                          Curtis Teledo Air compressor
                                                          6 1/4 & 3 3/8 BORE TWO STAGE COMPRESSOR MINIMUM SPEED - 400 RPM
                                                          Categories:
                                                          Condition:
                                                          Manufacturer:
                                                          Location:
                                                          • X Michigan (1487)
                                                          Price:
                                                          •  to 
                                                          <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>