Machine Tools > Wire Machinery > Wire Flattening Mills    < Back

8" x 4", FENN WIRE FLATTENING/SHAPING LINE, 5 IN 1, TRAV REEL (10123) - $RFQ

Item Number: #00024814
8&#034; x 4&#034;, FENN WIRE FLATTENING/SHAPING LINE, 5 IN 1, TRAV REEL (10123)
 
 
 


8" x 4", FENN WIRE FLATTENING/SHAPING LINE, 5 IN 1, TRAV REEL (10123)
 
Stock Code:  10123
Price: $RFQ
Subcategory: 

Wire Flattening Mills

Manufacturer:  Fenn
Condition: Used
 
MACHINE 10123

SPECIFICATIONS

MANUFACTURER FENN MANUFACTURING

TYPE "5 IN 1" WIRE FLATTENING/SHAPING LINE
-TURKSHEAD MOUNT AND CAPSTAN MOUNTED ON COMMON

BASE ATTACHED TO MILL

LINE CONSISTS OF THE FOLLOWING;

(1) FENN VERTICAL WIRE POWERED PAYOFF
-COIL MAX O.D. 36" (914mm)
-ARBOR DIAMETER 2 1/4"(57.15mm)
ACCEPT STANDARD WIRE CARRIER

-DRIVE MOTOR 3 HP WITH ELECTRIC BRAKE
UNIT IS EQUIPPED WITH TILT MECHANISM FOR CARRIER.

(1) FENN HORIZONTAL WIRE PAYOFF
-ARBOR SIZE 1 1/2" (38.1mm) DIAMETER TO ACCEPT STEEL DRUM
-DRUM SIZE
-FLANGE O.D. 30" (762mm)
-I.D. 14" (355.6mm)
-WIDTH 11" (279.4mm)

-ELECTRIC BRAKE ADJUSTO-BRAKE
1 1/2 HP RATING
90 VOLT

(1) FENN MODEL 2 HI ROLLING MILL
-ROLL
-DIAMETER 8 (203.2mm)
-ROLL FACE 4" (100.4mm)
-MATERIAL STEEL (ALSO SPARE SET OF CARBIDE ROLLS)
-TYPE WATER COOLED
-COLUMN SIZE 5 7/8" X 6 1/4" (150mm x 159mm)
-WINDOW OPENING 8 3/4" (222.25mm)
-BEARINGS ROLLER
-BEARING LUBE FORCED OIL
-DRIVE JOINTS 2 3/16" (55.6mm) SQUARE TYPE
-DRIVE MOTOR 75 HP 650/2000 RPM DC
FAIRBANKS MORSE, 240 VOLTS, TYPE DMZD,
FRAME 1807, NO. X82113, 1.15 SF
-DC GENERATOR 1/2 KW 2000 RPM, FAIRBANKS MORSE, 2 AMPS
250 VOLTS FULL LOAD, TYPE DGZDO, FRAME DX503
NO. X82108
-REDUCER NONE- MOTOR IS DIRECTLY COUPLED TO PINION STAND
-SCREWDOWNS MANUAL

MILL IS EQUIPPED WITH ADJUSTABLE ENTRY TABLE AND GUIDES AS WELL AS A SINGLE

PLANE 5 ROLL (1 3/8" (35mm) DIAMETER ROLLS) STRAIGHTENER AND A 2 PLANE ENTRY

GUIDE ROLL (APPROX 2 1/2" (64mm) DIAMETER ROLLS) SET UP.


(1) DOUBLE CAPSTAN
-CAPSTAN SIZE
-DIAMETER 16" (406.4mm)
-FACE WIDTH 3" (76.2mm)CONSISTING OF 4 FLAT GROOVES
EACH .625" (16mm) WIDE

CAPSTAN UNIT IS CHAIN DRIVEN FROM MILL. TENSION IS CONTROLLED VIA A WITCHITA
TUBE DISC CLUTCH.

(1) FLOOR MOUNTED DANCER
-TYPE THREE ROLL UNIT WITH TWO FIXED AND ONE MOVABLE

ROLL.

NOTE: THERE IS NO TURKS HEAD, TRAVERSING REEL OR DC ELECTRICAL DRIVE PROVIDED

WITH THE LINE. CUSTOMER TO SUPPLY

*******PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE********

*******SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER*******
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details