Machine Tools > Wire Machinery > Wire Flattening Mills    < Back

10" x 6", WHA ROBERTSON, 2 STAND TANDEM, 8" X 6" 2ND STAND W/EDGER (10085) - $RFQ

Item Number: #00024813
10&#034; x 6&#034;, WHA ROBERTSON, 2 STAND TANDEM, 8&#034; X 6&#034; 2ND STAND W/EDGER (10085)
 
 
 


10" x 6", WHA ROBERTSON, 2 STAND TANDEM, 8" X 6" 2ND STAND W/EDGER (10085)
 
Stock Code:  10085
Price: $RFQ
Subcategory: 

Wire Flattening Mills

Manufacturer:  W H A Robertson Machine
Model:  ORMANCO (TORRINGTON)
Condition: Used
 
MACHINE 10085

MANUFACTURER: W H A ROBERTSON MACHINE
MODEL: TORMANCO (TORRINGTON)
TYPE: 2 STAND TANDEM 2 HIGH WIRE FLATTENING MILL WITH
A TRAVERSING TAKE-UP REEL

LINE SPEED: 0 TO 300 FPM (91mpm) APPROXIMATELY

THE LINE CONSISTS OF THE FOLLOWING:

MILL MOUNTED STRAIGHTENER

TYPE: 5 ROLL UNDRIVEN
MOUNTED ON 1ST STAND MILL

ROLL SIZE
-DIAMETER: 3 3/4" (95.3mm)
-FACE WIDTH: 1 1/2" (38.1mm)

-INCLUDES 1 PAIR(2) 2 1/2" (63.5mm) DIA X 7 1/4" (184.2mm) LONG RUBBER

HORIZONTAL ENTRY GUIDE ROLLS

1ST STAND ROLLING MILL

ROLL SIZE: 10" DIAMETER X 6" WIDTH (254mm X 152.4mm)

WINDOW OPENING: 10 1/2" (266.7mm)
COLUMN SIZE: 4 1/2" X 4 1/4" (114.3mm X 108mm)

SCREWDOWN TYPE: MANUAL

DRIVE MOTOR: 125HP (93kw) DC
800/1800 RPM
500 VOLTS
220 AMPS

BEARINGS: APPEARS TO BE ROLLER BEARINGS
GREASE LUBE

-MILL IS EQUIPPED WITH ADJUSTABLE ENTRY GUIDE TABLE

EDGING STAND

TYPE: FRICTION (WAS ORIGINALLY A POWERED EDGER BUT DRIVE
SHAFT HAS BEEN REMOVED)

ROLL SIZE
-DIA: 6" (152.4mm)
-FACE WIDTH: 2" (50.8mm)

ADJUSTMENT: MANUAL

-ONE ROLL IS MISSING

2ND STAND

ROLL SIZE: 8" DIAMETER X 6" WIDTH (203.2mm X 152.4mm)

WINDOW OPENING: 8 1/2" (215.9mm)
COLUMN SIZE: 4 1/4" X 3 7/8" (108mm X 98.4mm)

SCREWDOWN TYPE: MANUAL

DRIVE MOTOR: 50HP (37.3kw) DC
1750/2100 RPM
500 VOLTS
82.8 AMPS

GEARBOX/REDUCER
-MANUFACTURER: SEW-EURODRIVE
-TYPE: R132
-RATIO: 11.96/1
-TORQUE: 44,000 lb/in

BEARINGS: APPEARS TO BE ROLLER BEARINGS
GREASE LUBE

-MILL IS EQUIPPED WITH EXIT GUIDE TABLE


TRAVERSE TAKE-UP REEL
TYPE: MILL DRIVEN VIA CHAIN

CAPACITY: 1,000 LBS (454kg) APPROXIMATELY
SHAFT DIAMETER: 3 3/8" (85.7mm)

TENSION CONTROL: AIR CLUTCH

TRAVERSE TYPE: MECHANICAL
TRAVERSE RANGE
-MINIMUM: 2" (50.8mm)
-MAXIMUM: 12" (304.8mm)

DRUM SIZE CAPABILITY (NO DRUMS INCLUDED)
-MOUNTING HOLE: APPROXIMATELY 3" (76.2mm)- (ACTUAL MANDREL SIZE
IS 2 7/8" (73mm)
-WIDTH: 12" (304.8mm)
-MAXIMUM O.D.: 32" (812.8mm)

-EQUIPPED WITH VERTICAL/HORIZONTAL STOCK GUIDES.



**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details