Machine Tools > Wire Machinery > Wire Drawers    < Back

BB-14, FENN, 0.187"-0.25", 6 BLOCK 14" DIA. BLOCKS (11186) - $RFQ

Item Number: #00001193
BB-14, FENN, 0.187&quot;-0.25&quot;, 6 BLOCK 14&quot; DIA. BLOCKS (11186)
 
 
 


BB-14, FENN, 0.187"-0.25", 6 BLOCK 14" DIA. BLOCKS (11186)
 
Stock Code:  11186
Price: $RFQ
Subcategory: 

Wire Drawers

Manufacturer:  Fenn
Model:  6 DIE B/B 14
Condition: Used
 
MACHINE # 11186



MANUFACTURER: FENN MANUFACTURING COMPANY



MODEL: 6 DIE B/B 14



DRAWING BLOCK SIZES: 14" (355.6mm) DIAMETER

3.665 FT. (1.12m) CIRC.



NUMBER OF DRAWING BLOCKS: 6 VERTICAL BLOCKS



CAPACITY:

-START SIZE: .187" (4.7mm) DIAMETER LOW CARBON STEEL

.125" (3.2mm) DIAMETER HIGH CARBON STEEL

-FINISH SIZE: .025"/.032" (.64mm/.81mm) DIAMETER





MAXIMUM SPEED: 2000 FPM



DRIVE MOTORS

-MANUFACTURER: GENERAL ELECTRIC

-QUANTITY: 6 (ONE ON EACH BLOCK)

-SPECS: 10 HP (7.45Kw) 1150/2400 RPM DC



GEARBOXES

-TYPE: WORM GEAR DRIVEN BY DRIVE MOTORS VIA BELTS

FOR FURTHER SPEED REDUCTION



-RATIOS/BLOCK SPEEDS: WORM RATIO O/A RATIO BLOCK RPM



-BLOCK #1 9.75/1 13.536/1 84.9/177.3

-BLOCK #2 7.4/1 10.859/1 105.9/221

-BLOCK #3 7.4/1 8.623/1 133.4/278.3

-BLOCK #4 5.125/1 6.874/1 167.3/349.2

-BLOCK #5 5.125/1 5.498/1 209.2/436.5

-BLOCK #6 5.125/1 4.398/1 261.5/545.7



LAST BLOCK (FINISH BLOCK) IS THE ACCUMULATING BLOCK AND IS EQUIPPED WITH A



RIDING STRIPPER.



ELECTRICS - BUYER TO SUPPLY NEW ELECTRICAL CONTROLS



-WATER REQUIREMENTS: 9.2 GPM MINIMUM-PRESSURE 40 PSI



-OVERALL DIMENSIONS

-LENGTH: APPROXIMATELY 16'-0" (4.8m)

-WIDTH: 56" (1422mm)

-HEIGHT: 69" (1753mm) GUARD CLOSED



INCLUDED WITH THE B/B 14 IS AN OVERHEAD TYPE WIRE PAYOFF UNIT TO PAYOFF WIRE



DIRECTLY FROM A WIRE CARRIER. PAYOFF HEIGHT IS 8'-9".



KEY FEATURES:



LONG DWELL BETWEEN THE DIES WITH DOUBLE AIR COOLING OF WIRE ACCUMULATION



ON BOTH LOWER AND UPPER BLOCKS IN ADDITION TO INTERNAL WATER COOLING.



WATER COOLED DIE HOLDERS.



COMPLETE ELIMINATION OF AXIAL TWIST FROM ONE BB BLOCK TO THE NEXT.



CONTINUOUS PRODUCTION DURING COIL AND SPOOL UNLOADING PERIODS.



FULLY AUTOMATIC CONTROL OF WIRE ACCUMULATIONS.



A.C. FIXED SPEED OR D.C. VARIABLE SPEED DRIVE ARRANGEMENT.



THE RUGGED BASE FROM CONSTRUCTION IS DESIGNED TO BE INSTALLED ON A FLAT



SURFACE WHICH MINIMIZES FOUNDATION WORK. THE DIE BOXES AND DOUBLE BLOCK UNITS



ARE MOUNTED ON TOP OF THIS BASE IN WHICH THE WORM GEAR DRIVES ARE HOUSED.



THE WORM SHAFT IS BELT DRIVEN FROM THE MAIN DRIVE MOTOR GIVING HIGH



EFFICIENCY AND LOW NOISE LEVELS. WHERE REQUIRED, HIGH SPEED BLOCKS ARE



DIRECTLY BELT DRIVEN FROM THE MOTOR.



THE DIE BOXES FEATURE A LARGE CAPACITY SOAP CONTAINER AND ARE DESIGNED TO



ACCEPT STANDARD DIE CASE SIZES.



THE WIRE PATH IS FROM THE DIE ONTO THE BOTTOM BLOCK, THEN ROUND A TAKE-OFF



PULLEY ONTO THE TOP BLOCK. FROM THE TOP BLOCK THE WIRE PASSES OVER A TRANSFER



PULLEY SYSTEM TO THE NEXT DIE STAND.



DEPENDING ON THE MATERIAL AND SIZE OF THE WIRE, FINISHING SPEEDS OF UP TO



25 m/s (5000 FPM) ARE ACHIEVABLE.



FINISHED WIRE CAN BE COLLECTED ON A HIGH CAPACITY STRIPPER BLOCK, A SPOOLER



OR A ROTODIE, ALL OF WHICH CAN BE SUPPLIED BY MRB.



THE DOUBLE BLOCK SYSTEM ACTS AS AN ACCUMULATOR ALLOWING THE REMOVAL OF



FINISHED COILS WITHOUT STOPPING THE MAIN MACHINE.



**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**



**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details