Machine Tools > Machining Centers - CNC > Vertical Machining Centers CNC    < Back

63" x 32" SHARP® Box Way Vertical Machining Centers - $RFQ

Item Number: #00084709
63&quot; x 32&quot; SHARP&#174; Box Way Vertical Machining Centers

63" x 32" SHARP® Box Way Vertical Machining Centers
Stock Code:  SV-6332SX
Price: $RFQ

Vertical Machining Centers CNC

X axis63"
Y axis32"
Manufacturer:  Sharp
Model:  SV-6332SX
Condition: New

The Sharp SV-6332 SX of vertical machining center is engineered to have unsurpassed quality and outperform all other machines in its category. This is a extremely rigid “C” frame design using hardened and ground box ways. All structural components are made of Meehanite casting with internal ribs running throughout each section. Precision hand scraping of each section provides near perfect alignment assuring long term accuracies.
Spindle is equipped with a 25 hp, 12,000 rpm CAT-40. Coolant through spindle is prepped for 20 bar. The new Fanuc 0i-MD control with color LCD is used along with all Fanuc motors and drives. For operator convenience, a remote jog handle is standard.
63” x 31.5” x 31.5” (1,600 x 800 x 800 mm) travel
Fanuc Control Oi MC Control
Four Box Ways Design
12,000 rpm Spindle, CAT-40
30 Automatic Tool Changer, Side Mounted
Fanuc Digital AC Servo Motors & Drives
Chip Drawer
20 / 25 HP, (15 / 18.5 Kw) motor

Manual Pulse Generator
Coolant System w/ Pump)
Semi-Enclosed Splash Guard
Automatic Lubrication System
Lubrication Failure Alarm
Halogen Work Light
Wired 220V, 3 phase, 60 Hz
Rigid Tapping
24 ATC (side mounted)
Leveling bolts, pads and nuts

Travel Size (x, y, z): 60" x 30" x 27” (1600 x 800 x 800 mm)
Table Size: 78.8 x 33” (1800 x 840 mm)
Table Load: 4,840 lbs (2,200 kg)
T Slots (no, width, pitch): 5 x .86 x 5.9” ( 5 x 22 x 150 mm)
Throat Distance: 34.2 “ (870 mm)
Spindle to Table: 7.8 – 39.3” (200 – 1,000 mm)
Spindle Speed: 12,000 rpm
Taper: CAT 40
Transmission (direct): Belt
Spindle Motor: 20 / 25 HP, (15 / 18.5 Kw)
Feed Rate ( X,Y ,Z ): 393.7 ipm (10,000 mm/min)
Rapid Traverse (X,Y),Z: (590), 472 ipm, (15,000), 12,000 mm
Tool Change System: 30 Tools, Side mount

Maximum Tool Diameter
Without adjacent tool: 3” (76 mm), 5.9” (150 mm)
Tool weight , Tool length: 15.4 lb (7 kg), 11.8 “ (300 mm)
Tool change time: 4 sec (tool to tool), 2.4 sec (chip to chip)

CNC Control Fanuc 0i-MD
Positioning Accuracy: +/- 0.0002” (+/- 0.005 mm)
Repeatability Accuracy: +/- 0.0001” (+/- 0.003 mm)

Electrical: 220V/3 phase/60 Hz
Air Requirement (psi): 5 CFM @100 PSI
Machine Dimensions: W:173”(4400mm) D: 135”(3428mm)
Height: 130” (3310 mm)
Net Weight: 33,000 lbs (15,000 Kg)

Extra Pull Stud
Transformer, 20 KVA
Flash ATA Card-128, 256, 512 mb, and 1G
Indexer Pre-Wire Pkg
Flat Type Chip Conveyor
4th Axis Pre-Wire Package, No AMP, No Motor
Coolant thru Spindle

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details