Machine Tools > Machining Centers - CNC > Vertical Machining Centers CNC    < Back

43" x 28" SHARP® Box Way Vertical Machining Centers with Fan - $RFQ

Item Number: #00084706
43&quot; x 28&quot; SHARP&#174; Box Way Vertical Machining Centers with Fan

43" x 28" SHARP® Box Way Vertical Machining Centers with Fan
Stock Code:  SV-4328ST
Price: $RFQ

Vertical Machining Centers CNC

X axis43"
Y axis28"
Manufacturer:  Sharp
Model:  SV-4328ST
Condition: New
Play YouTube Video

Sharp's Box Way Vertical Machining Center is an extremely rigid ā€œCā€ frame design using hardened and ground Box ways. All our vertical machining centers structural components are made of Meehanite castings internal ribs running throughout each section. Each axis is driven by a high Precision double-nut ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy.
43.3" x 27.5" x 24 travel, machine weight over 15,000 lbs
Induction hardened and ground box ways (X,Y,Z) for rigidity
Meehanite cast iron is used on all structural components. Finite Element Analysis
(FEA) is used to optimize the structure for rigidity.
A wide saddle fully supports the worktable throughout the travel.
Fanuc Oi-MD control
Fanuc digital AC servo, motors and drives
CAT-40 taper spindle with 10,000rpm/25 hp with chiller
Double anchored, pre-tensioned and double nut ball screws
20 bars coolant through spindle preparation

Fanuc Oi-MD control with 10.4" color LCD Screen
Remote Jog Handle
Fanuc Alpha Series Spindle Motor
Spindle Chiller
Separate Roll Out Coolant Tank
Flood Coolant
Large Side Doors
Electrical Cabinet Heat Exchanger
Automatic Lubrication System
Fluorescent Work light

Travel Size (x, y, z): 43.3" x 27.56" x 24"
Table Size: 51.2" x 25.6"
Maximum Table Load: 2,200 lb.
Table T-Slot Size: 5" x 0.7" x 3.9"
Spindle Center to Column (throat): 28.7"
Spindle Nose to Table Surface: 5.1" ~ 29.1"
Floor To Table: 33.5"
Spindle Speed (standard): 10,000rpm (12,000rpm ceramic bearing)
Spindle Speed (optional): 10,000 (rpm)
Taper: CAT-40
Spindle Motor: 20/25 HP
Spindle Motor (hp) (optional): 15/20 hp
Cutting Feed Rate (all axes)(MAX): 393 ipm
Rapid Traverse (x,y): 945 ipm
Rapid Traverse (z): 590 ipm
Axis Motor (Fanuc), (X, Y, Z): 2.4, 4.5, 5.4 HP
Max Thrust Rating X , Y, Z Axis Motor: 12 Nm, 22 Nm, 30 Nm
Ball Screw Diameter (X / Y, Z ) & Pitch: X/Y: 1.57/0.4 (inch) Z: 1.57/0.4 (inch)
Transmission: Direct Drive
Tool Capacity: 24
Max. Tool Diameter: 2.99"
Without Adjacent Tool: 5.9"
Max. Tool Length: 11.8"
Max. Tool Weight: 15.4 lb.
Tool Change Time, tool to tool: 4.6 sec
Tool Change Time, chip to chip: 6 sec
FANUC systems, standard: Oi-MD
FANUC systems, optional: 0i-MC, 21i-MB, 18i-MB
Positioning Accuracy: +/- 0.0002"
Repeatability Accuracy: +/- 0.0001"
General Power: 220V/ 3 phase/ 60Hz
Air Requirement (psi): 6 CFM @ 88psi
Machine Dimensions: 114" x 114" x 122"
Approximate Weight: 15,840 Ibs.

SV-4328 ST Productivity Package (includes Chip Conveyor, Chip Coolant Flush System, Coolant Gun and 4 Spare M Codes)
Fanuc CNC Update Option (2MB Part Program Storage, Data Server with Ethernet, 1GB Flash Memory)
Coolant Through the Spindle Pump Option
Rotary Table Options, Tsudakoma 6" Indexer
Rotary Table Options, Nikken 7" Rotary Table Package
Rotary Table Options, Nikken 8" Rotary Table Package
Options are Factory Installed

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR ā€“ Parts
This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details