General Specifications
Travels:
X-Axis 64"
Y-Axis 32"
Z-Axis 30" + 6"
Spindle nose to table (max.) 35"
Spindle nose to table (min) 5" Table:
Length & width 64"/28"
T-Slot width 5/8"
T-Slot center distance 4.92"
Number of Std T-Slots 5
Max. weight on table (evenly distributed) 4000 lbs Spindle:
Max. rating 30 HP
Max. speed geared spindle 7,500 RPM
Max. torque 450 ft-lb @ 500 RPM
Drive system 2-speed geared head
Taper 50
Bearing lubrication Air/Oil injection
Cooling Liquid cooled
Feedrates:
Rapids on X, Y & Z 540"/600"/600" in/min
Max. cutting 500" in/min
Axis Motors:
Max. Thrust X, Y & Z 5600 Lb.
Tool changer:
Type SMTC
Capacity 30+1
Max. tool diameter (adjacent empty) 10"
Max. tool diameter (full) 4"
Max. tool length (from gage line) 16"
Max. tool weight 30 lb
Tool to tool (avg) 4.2 sec
Chip to chip (avg) 6.3 sec 2 Stock 1 23 SERIAL NUMBER 4 NEW 5 GENERAL SPECIFICATIONS: (Cont.) Air required 4 scfm, 100 psi Coolant capacity 95 gal Weight (approx.) 21,000 lbs

Motor Specifications
Not Available

Equipped With
Haas CNC Controls
Visual quick code probing system
7,500 RPM 50 Taper spindle geared
Side mount 30 position automatic tool changer
4th Axis ready Brushless
Wired for high voltage 480 Volt
HRT310 12" Rotary Table & Tailstock
Auto Air Gun
High Intensity lightining
Power fault detection
Rotation & Scaling
Macros & Floppy Drive
Spindle Orientation
Full enclosure guarding
Coolant thru Spindle ready
New Spindle installed 2014 Hours: 10,300 Note: Replacement cost approx. $175,000.00

Serial Number
1052109 Year
2007 Location
ON LOCATION

This machine is listed for sale by Gray Machinery Company located in Prospect Heights, Illinois