General Specifications
Travels:
Maximum X axis 40"
Maximum Y axis 20"
Maximum Z axis 25"
Spindle nose to table (min.) 4"
Spindle nose to table (max.) 29"
Standard table:
Length48"
Width18"
Max. weight on table 1,750 lb
T-slot width 0.625"
T-slot center distance 3.15"
Number of T-slots 5 Spindle:
Taper size BT 40 Taper
Spindle max speed 12,000 RPM
Drive system Inline direct drive
Max. torque standard 75 ft-lb @ 2,100 RPM
Spindle motor max. rating 30 HP
Bearing lubrication Air/Oil Injection
CoolingLiquid cooled
Axis Motors:
Max. thrust rating X 3,085 LB
Max. thrust rating Y 3,085 LB
Max. thrust rating Z 3,923 LB
Feedrates:
Rapids on X axis 1,400 IPM
Rapids on Y axis 1,400 IPM
Rapids on Z axis 1,400 IPM
Max. cutting 833 IPM
Cont. on Page 2
Stock 1
2
3
SERIAL NUMBER 4 NEW 5
GENERAL SPECIFICATIONS:(cont.)
Tool changer:
Capacity standard 24 + 1
Tool type / taper BT 40
Max. tool diameter std (full) 3.0"
Max. tool weight 12 LB
Changer type standard (optional) SMTC
Tool-to-Tool (avg) 1.6 Sec. Chip-to-Chip (avg) 2.2 Sec. Accuracy (Single Axis): Positioning (+/-) 0.0002" Repeatability (+/-) 0.0001" GENERAL Door opening width 48.5" Machine weight 12,500 LB Air required 4 CFM @ 100 psi Power required 28 KVA

Motor Specifications
Not Available

Equipped With
Haas CNC Controls
Rigid tap
40 Position side mount tool changer
High speed machining
Chip auger & Remote jog handle
4th & 5th Axis interface
4-5 Axis TR1604 Compact Trunnion Table
Hi-intensity lighting
Through spindle coolant 100 PSI
Visual quick code Whips Probe
Intuative Programming & Macros
Rotation & Scaling
Spindle orientation
Ethernet hard drive & Floppy disc
Power fault detection Note: Approx. New Replacement Cost $160,000

Serial Number
1088304 Year
2011 Location
IN TRANSIT

This machine is listed for sale by Gray Machinery Company located in Prospect Heights, Illinois