Machine Tools > Machining Centers - CNC > Vertical Machining Centers CNC    < Back

38" X Axis 20" Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spindle, #40 NMTB Taper - $62,950

Item Number: #00019508
38&quot; X Axis 20&quot; Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spindle, #40 NMTB Taper

38" X Axis 20" Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spindle, #40 NMTB Taper
Stock Code:  135660
Price: $62,950

Vertical Machining Centers CNC

X axis38"
Y axis20"
Manufacturer:  Victor
Model:  1654DCM
Condition: New
MODEL: 1654DCM-CH (Quill Type head)

A Multiple Function 3-Axis CNC Mill with Manual Handwheel Operation,
Machine Guidance Operation, Teach-in / Playback CNC Operation, and
Fully Automatic CNC G-code, M-code, T-code, and S-code Functions

Table Size: 16" x 54"
Machine Travels: 38"X x 20"Y x 24"Z
Quill Travel: 6"
Spindle to Column: 21"
Spindle to Table: 4.5" - 28.5"
Feed rates: 0.01 ~ 200.0 in/min variable by program input
Rapid traverse: X & Y axis = 400 in/min, Z-axis = 300 in/min
Spindle Taper: #40 NMTB
Spindle Motor: 5.0 HP
Spindle Speeds:
  - Low Gear:     0 ~ 560  RPM
  - High Gear:  561 ~ 4,500 RPM
Machine Weight: 5,500 lbs.

  - The main machine body is made from Meehanite casting for excellent
vibration damping
  - Double wall working table & rigid saddle structure provides
unsurpassed rigidity
  - Both side of the saddle are coated with TURCITE B for smooth
  - The saddle, slideway, and table are hardened and ground to ensure
long life
  - Automatic lubrication system for all ballscrews and sliding ways to
keep high precision of the machine: X-Y axis 20 lube points and Z axis
13 lube points
  - Y-axis slideway and ballscrew protected by telescoping steel shield
to keep chips out
  - Z-axis ballscrew covered by telescoping spring guard to protect against
chips and dust
  - High accuracy C-5 grade ballscrews for X/Y/Z axis (32/40/40mm dia)
  - High rigidity one-piece CNC spindle head.
  - Air Power Draw bar standard
-  Optional ATC System
  - Vector Frequency Drive for spindle motor - excellent torque
characteristics at all speeds
  - All FANUC system with Fanuc AC brushless servo motors & drives
  - Four electronic handwheels for manual or automatic operations
  - Hardware overtravel limit switch for all travel directions
  - Automatic spindle jog during gear changes makes gear shifts easy
  - Halogen work light - Fully integrated to allow for CNC control of
on/off function
  - Coolant System - Fully integrated to allow for CNC control of
on/off function
  - Table guard w/ front sliding doors
  - Dual rear splash guards
  - Bottom chip and coolant drip pan
  - Set of leveling pads, screws, and nuts
  - Set of wrenches for operating machine
  - Set of Programming, Operation, and Maintenance manuals
  - Full one year parts & labor warranty on machine
  - One year warranty on Fanuc 20-FA CNC
  - Fanuc 20-FA Industry Standard CNC
  - Optional control choices: Fanuc 20i-FA, Centroid M-400, Anilam 5300M
  - 9" monochrome monitor & 44 key keypad
  - 3-axis (X ,Y, & Z) digital readout screen
  - Simultaneous 3-axis interpolation
  - Manual operation via four (4) handwheels
  - Machine guidance operation via handwheels
  - Conversational graphics programming
  - Teach-in / Playback operation: manually run 1st part, then Playback for
automatic operation
  - Automatic generation of G-code from Geometry data during teach in operation
  - Simultaneous multiple M-code processing (Up to 3 M-codes)
  - 6 CNC Modes: MEM, EDIT, MDI, Machine Guidance, Manual/handwheel, Ref Return
  - 8 Auxiliary CNC Modes: Dry Run, Single Block, Optional Blk Skip, Z-Axis Cancel,
Aux. Function Lock, X-Axis Mirror Image, Y-Axis Mirror Image, Manual Handle Interrupt
  - Manual Interrupt of automatic operations: Handwheel Interrupt and Spindle Interrupt
  - Diameter / Radius programming
  - Absolute and incremental programming
  - Inch / Metric input and display
  - On-line calculator function to aid in data input
  - On-line help pages to aid you in the CNC operation
  - On screen tool path graphics to verify part program
  - User programmable "Software Travel limits" to limit the travel for X , Y& Z axes
  - Intelligent hardware travel limits - only stops movement in the over-traveled
  - Inch / Metric feed rate input: inch/min or mm/min
  - Gear indicator lights on status panel
  - Auto spindle jog during gear changes
  - Spindle load meter: 0% - 180% of rated load
  - Supervisor key lock switch for disabling parameter and program modification
  - Conveniently mounted machine Control Panel - E-Stop, Playback, Start, Stop
  - Aux. Functions on Control Panel: work lamp and coolant
  - Spindle control on Control Panel: forward, reverse, stop, & speed dial
  - User selectable Jog / Feedrate override profiles: Linear or Exponential
  - Auto/Jog feedrate override: 0% to 200%
  - Spindle override: 50% to 150%
  - Rapid Traverse override: 12.5%, 25%, 50%, & 100%
  - Incremental / continuous jog for X, Y, & Z axes
  - Intelligent Bi-directional home search for X ,Y, & Z axes
  - Multiplier switch for handwheel sensitivity: 0.0001", 0.001", & 0.01"
  - CNC "RUN VERIFY" by Joystick or handwheel for all automatic operations
  - Easy one touch X, Y, & Z Part Coordinate System setting
  - Full CNC control of coolant on-off functions via M-codes
  - Full CNC control of work light on-off functions via M-codes
  - Three coordinate systems: Machine, Absolute, & Relative
  - Program storage 63 part program storage
  - Scaling, Rotation, and Mirror functions
  - Run-Timer / Parts Counter function
  - Backlash error compensation
  - Ballscrew pitch error compensation (for Laser Calibration)
  - Single direction positioning (optional)
  - Helical interpolation (optional)
  - Background Program Editing (optional)
  - Rigid Tapping (Available on CNC rigid head model only) (optional)
  - Spindle Orientation (optional)
  - Custom Macro B programming language (optional)
  - Built-in RS-232 port for loading/unloading of part programs and other CNC data
  - 32 Tool length offsets & diameter offset data locations (64 offset data
locations optional)
  - Self diagnostics with error messages on screen

  - Table Guard w/ Front Sliding Door   
  - Rear Splash Guard
  - Bottom Coolant & Chip Tray
  - Built-in flood coolant system
  - Halogen Work Lamp
  - Metallic slideway and ballscrew covers
  - Air power draw bar
  - Quadruple (4) electronic handwheels
  - Variable speed head (CNC controlled)
  - Run-Timer / Parts Counter

 - 6" Angle-lock machine vise   
  - 8" Angle-lock machine vise   
  - 10" Horizontal / Vertical Manual rotary table   
  - 12" Horizontal / Vertical Manual rotary table   
  - 14" Horizontal / Vertical Manual rotary table   
  - Clamping kits      
  - Boring head, shank & set of boring bars   
  - Remote control pendant handwheel (X, Y, Z, & MG Axis)   
  - SMW RT-160 CNC Rotary Table (Ø6.3" faceplate, 85 Lbs capacity)
  - SMW RT-175 CNC Rotary Table (Ø6.9" faceplate, 120 Lbs capacity)   
  - SMW RT-225 CNC Rotary Table (Ø8.8" faceplate, 160 Lbs capacity)   
  - SMW RT-275 CNC Rotary Table (Ø10.8" faceplate, 220 Lbs capacity)   
  - SMW RT-325 CNC Rotary Table (Ø12.8" faceplate, 460 Lbs capacity)   
  - SMW RT-375 CNC Rotary Table (Ø14.7" faceplate, 460 Lbs capacity)   
(All Rotary Table prices include manual tailstock, control
interface, CNC software / installation)
  - Upgrades for the 1654DCM (Rigid Head)
  - Carousel type ATC - 20 Tools
  - Tool Holders for NMTB40/ CT40 / BT40 (Specify type when ordering)
  - Ø 1/4", 3/8", 1/2", 5/8", 3/4" Tool Holders (Priced each, specify size
when ordering)   
  - Collet-type Tool Holder   
  - Various diameter collets (Priced each, specify size when ordering)   
  - Wrench   
  - Retention Knobs
  - Retention Knobs for CT40
  - Retention Knobs for BT40   
For tool holders & accessories that are not listed above, please call
with your requirements

This machine is listed for sale by Machinery Values Inc. located in Harrison, New Jersey
Contact the Seller
Machinery Values Inc.
  401 Supor Blvd
NJ 07029
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details