Machine Tools > Tube & Pipe Machinery > Tube End Formers    < Back

7/8"Cap, T-DRILL, No. TCC-50-EF02, 2003, TUBE CUTTING & END FORMING LINE (10963) - $RFQ

Item Number: #00001074
7/8&quot;Cap, T-DRILL, No. TCC-50-EF02, 2003, TUBE CUTTING & END FORMING LINE (10963)
 
 
 


7/8"Cap, T-DRILL, No. TCC-50-EF02, 2003, TUBE CUTTING & END FORMING LINE (10963)
 
Stock Code:  10963
Price: $RFQ
Subcategory: 

Tube End Formers

Manufacturer:  T Drill Industries
Model:  0-EF20
Condition: Used
 
MACHINE# 10963



SPECIFICATIONS:

MANUFACTURER: T-DRILL INDUSTRIES (FINLAND)

YEAR OF MANUFACTURE: 2003

MODEL No.: TCC-50-EF20



TYPE: TUBE CUTOFF MACHINE WITH IN-LINE END FORMER & AUTOMATIC WORK CYCLE.



APPLICATIONS: SUITABLE FOR COPPER OR ALUMINUM IN COIL FORM. CAN BE USED AS



A CUTOFF ONLY OR WITH THE IN-LINE END FORMER FOR NOTCHES, FLANGES, COLLARS,



ETC.



MAXIMUM DIAMETER OF TUBE (CUTOFF ONLY): 22mm (7/8")

MAXIMUM DIAMETER FOR CUT & END FORM: 8mm - 16mm (0.31"- 0.625")

MAXIMUM DIAMETER OF END FORMED SHAPE: 22mm (7/8")



WALL THICKNESS: 0.4mm - 1.5mm (.020"-.060")

HEIGHT OF TUBE LINE ABOVE FLOOR: 1100mm (43")

MACHINE WEIGHT: 1900 KG (4200 LBS.)

MAXIMUM NOISE LEVEL: 80 DB

COMPRESSED AIR SUPPLY: 6 BAR = 600 KPA

POWER: 6.5 kW

SUPPLY VOLTAGE: 200/415 VOLT/50 HZ

200/480 VOLT/60 HZ

PAYOFF:

THE COIL EQUIPMENT CONSIST OF TWO DIFFERENT UNITS: THE DOUBLE HOLDER AND



THE TENSION UNIT. THE DOUBLE COIL HOLDER IS A UNIT FOR UNCOILING THE TUBE.



THE TENSION UNIT IS A COMPRESSED AIR DRIVEN UNCOILING DEVICE, WHICH ABSORBS



JERKS EXERCISED ON THE COIL AND CONTROLS THE UNCOILING SPEED. THE UNCOILING



EQUIPMENT IS CONNECTED TO THE CONTROL UNIT OF THE MAIN MACHINE.



TUBE STRAIGHTENER:

THE STRAIGHTENER CONSISTS VERTICAL AND HORIZONTAL ROLLS, WHICH ARE USED TO



STRAIGHTEN COIL FED TUBE. EVERY TUBE DIAMETER REQUIRES A CORRESPONDING SET



OF STRAIGHTENING ROLLS.



PINCH ROLL STATION:

SOME LARGE COIL FED TUBE IS INITIALLY STRAIGHTENED BY A PINCH ROLL STATION



TO TAKE OUT THE COIL SET. WHEN TUBE O.D. IS MORE THAN 12mm (1/2") OR IT



REQUIRES ROUND CONDITION, PINCH ROLL STATION IS USED.



THE CUTTING METHODS OF TUBE:



THE MACHINE CAN BE USED ONE OF THREE METHODS TO CUT THE TUBE.



1. THROUGH CUT METHOD:

THE BLADE PENETRATES THE TUBE WALL. THIS METHOD CAN BE USED FOR CUT



LENGTHS OF 200mm (7/8") + LENGTH OF END FORMING. IF ONLY A THROUGH CUT IS



CARRIED OUT, THE MINIMUM CUT LENGTH IS 150mm (6"). THROUGH CUT CAUSES SOME



I.D. REDUCTION.



2. CUT & PULL APART METHOD:

THE BLADE PENETRATES ABOUT 90% THROUGH THE TUBE WALL AND A POWERED MOVEMENT



OF THE OUTBOARD CLAMP PULLS THE TUBE APART. PULL-APART METHOD IS USED WHEN



I.D. REDUCTION NEEDS TO BE MINIMIZED. THE METHOD IS USED FOR CUT LENGTHS



MINIMUM 200mm (7/8") + LENGTH OF END FORMING. IF ONLY AN INCISION AND PULL



APART IS CARRIED OUT, THE MINIMUM CUT LENGTH IS 150mm (6").



3. CUT AND BREAK METHOD:

THE BLADE PENETRATES ABOUT 90% THROUGH THE TUBE WALL AND AN AIR CYLINDER



BREAKS THE TUBE OFF FROM THE SIDE. THIS METHOD IS USED FOR CUT LENGTHS



SHORTER THAN 200mm (7/8"). MINIMUM CUT LENGTH IS 3 TIMES TUBE O.D. WHEN



END FORMING IS USED, THE CUT LENGTH IS MINIMUM 3 TIMES TUBE O.D. AND



MAXIMUM < 200mm (7.2") + LENGTH OF END FORMING.



TOOLING:

THE LINE IS PRESENTLY TOOLED FOR 7.64mm AND 6.36mm TUBE AND WAS PREVIOUSLY



USED ON COPPER REFRIGERATION TUBE TO MAKE HEAT EXCHANGERS AND SKIN



CONDENSERS. THE MACHINE CAN BE RETOOLED TO HANDLE A VARIETY OF END FORMING



APPLICATIONS, INCLUDING FLANGES, COLLARS, NOTCHES, ETC. THE MANUFACTURER



IS AVAILABLE TO SUPPLY PARTS AND TECHNICAL ASSISTANCE.



**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**



**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details