Machine Tools > Coil Processing & Handling > Slitting Lines    < Back

24" (610mm) x 4.25" x 6,000 LB.STANAT, S-190-24, PRECISION RING TYPE (11483) - $RFQ

Item Number: #00087995
24&#034; (610mm) x 4.25&#034; x 6,000 LB.STANAT, S-190-24, PRECISION RING TYPE (11483)
 
 
 


24" (610mm) x 4.25" x 6,000 LB.STANAT, S-190-24, PRECISION RING TYPE (11483)
 
Stock Code:  11483
Price: $RFQ
Subcategory: 

Slitting Lines

Manufacturer:  Stanat
Condition: Used
 
MACHINE# 11483

SPECIFICATIONS:

Uncoiler:
Stanat HTP-6000
s/n: 130880
6,000 Lb. (2720 Kg) Capacity
Hydraulic Expansion
4 segment mandrel
24-1/2" (622mm) Face
4 leaf expanding type mandrel
12" - 16" (305mm - 408mm) Expansion range
Wichita air tube disc clutch
45" from floor to center of mandrel
overarm powered hold down roll
Reliance 5 hp, 1750/2300 rpm, 240 volt DC motor
Controls on uncoiler for:
brake, jog for/rev
brake off, drum collapse, stop/start, payoff in/out
Hydraulic traversing base.
hydraulic expansion
power rotation

Slitter Head:
Stanat S-190-24
25" (635mm) arbor face, 24" (610mm) nominal slitting
Entry swing away table
Entry swing away table
Entry Passline Roll
Entry Drag Wiper
Entry Side Guides, Manual Adj.
4.25" (108mm) Dia. Slitter Arbors
Steel Stripper Ring Assembly with
adjustable top & bottom rolls on entry & exit.
Parallel Top Arbor Adj.
Exit neoprene support roll
10 HP DC 240 volt, 1150/2000 rpm, Cleveland Machine controls Drive Motor to:
Reliance electric Dodge TM reducer, ratio 5:1, max. hp at 1750 rpm: 31.3
Air clutch

Recoiler:
Common Drive with Slitter Head
Air Clutch
Drum included:
(1) - 12" Dia. x 35" Face Width

Scrap Winder:
Stanat self contained
Air Motor Driven
Traverse wind
Manual scrap ball removal

Bridle roll assembly with 1 5" dia. neoprene entry roll

(2) 12" neoprene rolls & (1) 4" dia steel bottom roll, cardboard covered.
Geared rolls driven off main drive train.

Operator's Control Panel
Gauges by Lenz for:
Bridle pressure / pushbutton for clutch, dial for bridle brake
Lenz guage for Recoiler pressure dial for recoiler brake
push button for recoiler clutch
Guage for scrap winder clutch, dial for scrap brake, button for scrap clutch
Guage for scrap winder traverse
Dial for traverse brake, button for traverse clutch.
Guage for payoff pressure, dial for payoff brake, button for payoff clutch
toggle swithc for drive tension
Guage for recoiler slipping cores, slipping core brake, slipping clutch
power on, off
selector switch for slitter loop- less/more
push button hydraulic on, hyd off, bridle up/ bridel down
dial needle indicator - Cleveland Mach controls for percent load
CMC dial for FPM
Slitter - push buttoon up/down/slitter jog
run/slitter stop
Rheostat dial- 0-100
emergency stop
payoff jog forward/jog reverse
selector- loop/ bypass
drum expand/ run
photos cells on/off
payoff out/in

CMC Control:
Type 100
s/n: 971910014
10 HP
controller input- 230 volt ac, 14 KVA
innterrupter capacity- 10,000 amps
freq. 50-60 , 3 ph, 3 wire
full load current motor 37 amps
schematic- D100N-29778
A-100-49462

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details