Machine Tools > Punches & Punching Machines > Single End Hydraulic Punches    < Back

132 Ton BAILEIGH Five Station Hydraulic Ironworker - $RFQ

Item Number: #00061290
132 Ton BAILEIGH Five Station Hydraulic Ironworker
 
 
 


132 Ton BAILEIGH Five Station Hydraulic Ironworker
 
Stock Code:  SW-132
Price: $RFQ
Subcategory: 

Single End Hydraulic Punches

Manufacturer:  Baileigh
Model:  SW-132
Condition: New
 
CALL FOR BEST PRICING!

FEATURES:
Baileigh Industrial’s biggest all vertical ironworker is the SW-132. This behemoth has 132 tons of punching and 179 tons of shearing and notching power. It is also a dual operator machine, meaning two workers can work on opposite sides of the machine without a loss in power. To achieve such power the SW-132 boasts a 220 Volt three phase 15 hp motor to power the industrial grade hydraulic system. The SW-132 is truly a workhorse and will be at home in any size shop.
The SW-132 is a five station ironworker with stations for punching, notching, flat bar shearing, angle shearing, and bar shearing. Like most Baileigh Industrial hydraulic ironworkers the SW-132 uses the best design in the industry and uses vertical motion at each station. This type of machine eliminates the harsh snap in the punching station common on other brands. By eliminating the harsh snap the machine has less fatigue on it and the tooling lasts much longer. The punching station on the SW-132 ironworker comes standard with seven sets of punches and dies as well as an oversized work table that has material stops and is scaled for easy setup.
The Baileigh Industrial SW-132 hydraulic ironworker was been designed and built to the highest quality standards in the industry. No corners were cut; the frame is fully welded for rigidity and hydraulic clamps were added to the shearing station to hold everything in alignment. This eliminates any lifting of the material when shearing, extending blade life and providing a square sheared part. Other great features of the SW-132 are an electric back gauge, swing away stripper, oversized work tables, foot pedal operation, and waste buckets.
The SW-132 also has optional tooling such as press brakes, pipe notchers, channel and I-beam shears, and others are available.
MADE IN TAIWAN

SPECIFICATIONS:

PUNCHING:
Punching Pressure: 132 Tons
Punch Capacity: 1.125" x .1.062"
(Diameter x Thickness): 2" x .625"
Throat Depth: 16"
Max Stroke Length: 3"
Cycles / Min: 30 @ 15 mm
Working Height Up to Die: 41.3"

FLAT SHEARING:
Flat Bar Shearing: 18.1" x .75"
(Width x Thickness): —
Blade Length: 18.3"
Angle Flange Trim: 4"
Working Height: 30.3"

ANGLE SHEARING:
At 90° Shearing: 6" x 6" x .6"
Working Height: 39"

BAR SHEARING:
Round Bar Shear: 1.75"
Square Bar Shear: 1.75" x 1.75"
Working Height: —

NOTCHING:
Rect. Notcher (W x D x T): 2" x 3.5" x .5"
Working Height: 41.3"

OTHER:
Electric Power (HP): 15 HP
Net Weight (Apr.): 9,460 lbs.
Machine Dim. Apr. (L x W x H): 85.5" x 44" x 80.7"

SPECIAL TOOLING:
Single Vee Press Brake (L x T): 9.875" x .75"*
Multi-Vee Press Brake (L x T): 27.5" x .187"*
Angle Bending*: 4" x .5"*
Pipe Notching: 4.4"*
Lg.Vee-Notcher (Side x Side x T)*: 5.75" x 5.75" x .5*
Vee-Notcher (Side x Side x T)*: 4.1" x 4.1" x .6"*
Channel Shear: —
I Beams Shear: —

* Optional Tooling - Please Call based on material tensile strength of 65,000 PSI.
Design subject to change without notice.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.
 
This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
 
Contact the Seller
 
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details