PLEASE CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
MADE IN USA
TENNSMITH'S power shears combine all of the features of our foot shears with the advantage and convenience of air or hydraulic operation. TENNSMITH power shears are a productive addition to any shop. The air shears utilize heavy-duty, tie rod-type pneumatic cylinders, which provide up to 40 strokes per minute in capacity materials.
A foot-operated air valve control, pressure regulator, air gauge, oiler/condenser cups and neoprene, padded holddown feet are standard features. We recommend a maximum air supply of 75 psi for operating these shears at rated capacity. Where air supply pressures exceed 75 psi, an in-line regulator is helpful to provide pressure control.
The Model 52H cycle at 45 strokes a minute, thanks to its first class hydraulic system. The hydraulic unit is of a low maintenance design featuring a solenoid actuated valve, 3-HP electric motor, self-contained pump in tank with pressure gauge, check valve and industrial quality cylinders. The motor is protected by a magnetic starter.
Other electrical safety features include a low voltage on/off switch; low voltage, shrouded, electric foot switch; step-down transformer with low voltage circuit fuse; fully enclosed electrical box; and insulated reinforced conduit for all wiring. Models 36A and 52A are ideal ways to enhance shearing productivity with minimal investment.

STANDARD EQUIPMENT:
High Carbon/High-Chromium (HCHC) Blades
Back gauge
Front extension arms with stop
Bevel gauge
Graduated side gauges
Foot control
Neoprene padded hold down feet

SPECIFICATIONS:
Operation: Hydraulic
Maximum shearing capacity, Mild Steel: 16 gauge/1.6mm
Maximum shearing capacity, Stainless Steel: 20 gauge/1.0mm
Maximum cutting length: 52-1/4" / 1,327mm
Back gauge range: 30" / 762mm
Front gauge range: 37" / 940mm
Floor space, gauges in position: 60" x 80"
Dimensions, Less gauges, LxWxH: 61" x 25" x 42"
Strokes per minute, full length: 45
Maximum Operating Pressure: 1,450 psi
Air Consumption per Stroke: 1.33 cu. ft.
Motor: 60Hz, 1,745 RPM: 3 HP
Voltage: 230V/3/60 or 230V/1/60 (please specify)
Shipping Weight: 1,300 lbs. / 590kg

OPTIONAL ITEMS:
Wired 220 Volt, Single Phase, 60 Hz Electrics
Wired for CSA Canadian Electrical Standard
Squaring arm
One-shot lubricating system

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 3 YEAR – Limited

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida