Machine Tools > Rolling Mills & Ring Formers > Sendzimir Rolling Mills    < Back

WATERBURY FARREL ZR23-25 COLD STRIP REVERSING MILL - $RFQ

Item Number: #00092203
WATERBURY FARREL ZR23-25 COLD STRIP REVERSING MILL
 
 
 


WATERBURY FARREL ZR23-25 COLD STRIP REVERSING MILL
 
Stock Code:  112767
Price: $RFQ
Subcategory: 

Sendzimir Rolling Mills

Manufacturer:  Waterbury Farrel
Condition: Used
 
YEAR: 1969

SPECIFICATIONS
MILL SECTION: ZR23-25
MILL TYPE: REVERSING, COLD ROLLING
MATERIAL: STAINLESS STEEL, HIGH CARBON STEEL , BRASS, ALUMINUM

STRIP WIDTH DATA
MAXIMUM: 26.500IN/673.101MM
MINIMUM: 20.000IN/508.001MM
ENTRY GAUGE MAXIMUM: 0.100IN/2.540MM
EXIT GAUGE MINIMUM: 0.003IN/0.076MM
MAXIMUM COIL SIZE (WINDER) O.D.: 48.000IN/1219.202MM
COIL SIZE (WINDER) I.D.: 24.000IN/609.601MM
MAXIMUM COIL WEIGHT:
ABSOLUTE COIL WEIGHT: 11,000 LBS/ 4,990 KG

MILL DATA/
MILL SPEED (MAX): 500FPM/152MPM
MILL SPEED (MIN): 250FPM/76MPM
MILL POWER: 300HP/224KW
MAIN MOTOR DRIVE650/1300 RPM, 500 VOLT DC
PINION STAND RATIO:

MILL ROLLS
WORK ROLL NOMINAL DIAMETER: 1.578IN/40.081MM
1ST INTERMEDIATE NOMINAL DIAMETER: 2.812IN/71.425MM
LATERAL ADJUSTMENT, MOTORIZED
2ND INTERMEDIATE NOMINAL DIAMETER: 5.031IN/127.788MM
MILL BEARINGS: 8.858IN/224.994MM

WINDERS
WINDER POWER: 200HP/149KW
500/1600 RPM, DOUBLE, 100 HP EACH, 240 VOLT, DC
GEAR BOX RATIO:
WINDER MANDREL:
DIAMETER: 24.000IN/609.601MM
FACE: 29.000IN/736.601MM
MANDREL TYPE: SOLID BLOCK
MANUAL CAM LOCK TYPE GRIPPERS
BLOCK WEIGHT: 6600LBS/ 2,994 KG
WINDER TENSION:
MAXIMUM TO 435 FPM: 20,000 LBS/ 9,072 KG
INTERMEDIATE TO 650 FPM: 13,200 LBS/ 5,987 KG
MINIMUM: 1,400 LBS/ 635 KG
TENSION RANGE:

PAYOFF
POWER: HP, AC/0KW
TENSION: 5000LBS/ 2,268 KG
SPEED: 1800RPM, GEAR MOTOR
MANDREL DIAMETER: 17.5 TO 21.5IN/444.5 TO 546.1MM
NOMINAL: 20.000IN/508.001MM
(WITH FILLERS): 25.500IN/647.701MM
GEAR BOX RATIO:

FEEDER
POWER: 5.0HP/3.7KW
1800 RPM, GEAR MOTOR
FEED ROLLS, (DIA X FACE): 8" X 40"
COIL PEELER/FEED TABLE

COOLANT -FILTER SYSTEM: MINERAL OIL - DIATOMCEOUS EARTH

MILL DIRECTION: RIGHT TO LEFT

LINE CONFIGURATION
COIL CAR: HYDRAULIC COIL LIFT
PAYOFF REEL: SNUBBER CONTROL ROLL, HYDRAULIC LATERAL TRAVERSE, JOGGING

MOTOR, DRAG BRAKE, EDGE CONTROL UNIT, PAPER WINDER
FEEDER: PINCH FEED ROLLS, JOGGING MOTOR, COIL PEELER, FEED TABLE
WINDER (RIGHT): SOLID BLOCK, BLOCK STORAGE AREA, PAPER WINDER
DEFLECTOR ROLL: 8" DIAMETER
STRIP THICKNESS GAUGE
MAIN MILL FRAME: ROLLER TYPE WIPERS "D" SHAFT CROWN CONTROL
STRIP THICKNESS GAUGE: ABB GAMMA RAY
DEFLECTOR ROLL
WINDER (LEFT): SOLID BLOCK, BLOCK STORAGE AREA, PAPER WINDER

NOTE: REWIND LINE, STAND ALONE, OFF LINE

MOTOR DRIVE CONTROLS: ROCKWELL AUTOMATION, 2005
THICKNESS GAUGE: DMC, NON CONTACT, GAMMA RAY
OPERATOR CONTROL CONSOLE

OVERALL FLOOR DIMENSIONS, (L-R / F-B):
59FTX33FT
17.983MX10.058M

CLICK ON THE FOLLOWING LINK TO WATCH A VIDEO OF THE MACHINE
https://youtu.be/2-dagRoljpM
 
This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey
 
Contact the Seller
 
National Machinery Exchange Inc
  158 Paris Street
Newark
NJ 07105
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details