Woodworking Equipment > Routers > Router Tables    < Back

BAILEIGH® Router Table WR-510V-ATC - $RFQ

Item Number: #00080091
BAILEIGH&#174; Router Table WR-510V-ATC
 
 
 


BAILEIGH® Router Table WR-510V-ATC
 
Stock Code:  WR-510V-ATC
Price: $RFQ
Subcategory: 

Router Tables

Manufacturer:  Baileigh
Model:  WR-510V-ATC
Condition: New
 
CALL FOR AVAILABILITY AND BEST PRICING!

FEATURES:
This CNC router table can automatically change tooling in just 8 seconds. Program profile switches into your design to save time and maintain precision during industrial production runs.
Large 5’ x 10’ table.
Arrives pre-built with correct alignment. No complicated set-up process.
Comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
Runs on 220-volt 3-phase power.
Powerful 7.3 hp spindle can tackle hard materials without flinching.
5.5 kilowatt water-cooled spindle will stay accurate through years of production.
Variable spindle speed, from 3,000 to 18,000 rpm.
Yaskawa brand servo motors ensure smooth running at both fast and slow speeds.
High gantry is up and away from material, allowing you to see what it’s doing.
Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
Upload your design to the wood working router table with a USB drive.
You can operate the machine from the console podium.
Automatic tooling changes let you swap out bits with computer-controlled precision.
Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
Pre-load up to 7 collets with your chosen profiles; the router will switch between them as programmed.
Powerful vacuum in the bed of the table holds the material in place during the cutting process.
6 vacuum zones allow you to turn on the valve only for the area where you’re working.
Arrange each zone’s vacuum seal into the shape of the material to provide well-distributed suction.
Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
BobCAD-Cam Express Design Software (Included)
The WR-510V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the router table via a USB drive.

SPECIFICATIONS:
Table: 5' x 10'
Rpm: 3,000 - 18,000
Z Axis Stroke: 7.5"
Maximum Moving Speed (Inches Per Minute): 787
Maximum Engraving Speed (Inches Per Minute): 787
Reposition Accuracy: 0.0015
Tool Diameters: 1/8", 1/4", & 1/2"
Power: 220V, Three Phase
Weight: 2,500 lbs.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts
 
This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
 
Contact the Seller
 
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details