Machine Tools > Rolling Mills & Ring Formers > Ring Rollers    < Back

2" x 2" x .1875" BAILEIGH® Hydraulic Metal Ring Roller - $RFQ

Item Number: #00062894
2&quot; x 2&quot; x .1875&quot; BAILEIGH&#174; Hydraulic Metal Ring Roller

2" x 2" x .1875" BAILEIGH® Hydraulic Metal Ring Roller
Stock Code:  R-M55H
Price: $RFQ

Ring Rollers

Manufacturer:  Baileigh
Model:  R-M55H
Condition: New

The R-M55H profile bender’s design was developed form the R-M55. It has the same 2" Schedule 40 pipe capacity, as the R-M55 but incorporates an industrial grade hydraulic system to control the top forming roll. This takes less effort and time on the operator to achieve the same radii. In addition to the hydraulic movement there is also a digital readout to let the operator know exactly where the top shaft is positioned. This is very important for repeating bends.
The R-M55H has a powerful direct gearbox drive system that delivers full torque when bending at full capacity. The R-M55H uses an inverter that is overload protected, to control the rolling speed. Being variable speed allows the operator to fine tune the rolling speed for each material. It only requires 220 volts of single phase power to operate and it can be operated in both the vertical mode for small rolling projects, as well as in the horizontal mode for large rolling projects as there are feet on the bottom and back of the machine.
Operation of the R-M55H profile bender is done from an independent operator pedestal that has the digital readout programmer, controls for the top roll positioning, as well as foot pedal controls for forward and reverse. This profile bender is designed to offers years of production at a very affordable price.

Pipe: 56" Diameter w/2” (sch.40)
Round Tube: 60" Diameter w/ 2.75” (.078”)
Square Tube: 48" - 78" Diameter w/ 2 ” (.083”)
Angle Iron: 28" Diameter w/ 2” (.1875")
Solid Square: 20" Diameter w/ 1.375”
Solid Round: 20" Diameter w/ 1.375"
Flat Bar Easy Way: 20" Diameter w/ 4" (.5")
Flat Bar Hard Way: 20" Diameter w/ 2.25" (.375")
Roll Adjustment: Hydraulic
Pinch: Single
Shaft Diameter: 1.968"
Roll Diameter Upper: 5.827"
Roll Diameter Lower: 5.827"
Shaft Center Distance (lower rolls): 13.12"
Driven Rolls: 2
Speeds: 13.6-27.2 rpm (variable)
Motor: 2 HP
Power Requirement: 220V / Single-phase
Shipping Dimensions (L/W/H): 60” / 44” / 68”
Shipping Weight: 1,000 lbs

Pipe / Tube Bending Rolls
Angle Bending Rolls

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details