buy & sell, new & used
machinery, machine tools
not a member?
Drills & Tapping Machinery
21" SHARP® Radial Drill - $RFQ
Item Number: #
21" SHARP® Radial Drill
CALL FOR BEST PRICE!
Sharp radial drills are excellent machines for tapping, drilling and boring large holes on cast iron or steel material. The traveling arm is made with hardened and ground slide ways for precise movement of head and spindle. The vertical column utilizes double tube design for rigidity. The spindle is equipped with depth setting.
The Sharp heavy duty Radial Drilling Machines are designed for a wide range of machining operations to be used under the most demanding conditions.
All major castings are made of closed grained full ribbed iron to give maximum stability under stress. The headstock gears are made of hardened and ground nickel-chrome alloy steel.
The arm is mounted with ground slideways and operated by electric control. It has a safety device that will prevent the arm from dropping due to unforseen reasons.
The rigidly ribbed casting base is provided with T-slots and drain channels. The spindle is designed for maximum speed, feed rate and depth.
Hardened and Ground Arm Slideways
Arm Elevation is controlled by Electric Motor
Safety Device prevents arm from dropping
T-Slots and Drain Channels on casting
Hardened and Ground Gears
Wired 220V or 440V
Diameter of column: 21.65"
Dist. column to spindle: 19.7"-98.4"
Travel of spindle head: 78.74"
Dist. Spindle to base: 21.7"-79"
Elevating height of arm: 39.37"
Effective area of table: 39.3" x 31.5" x 22"
Dimensions of base: 138.6" x 55.12" x 12.6"
Taper hole in spindle: MT#6
Stoke of spindle: 17.72"
Spindle (rpm range x steps): 16-1250 x 16
Spindle feed (ipr x steps): 0.04", 3.20" x 16
Main motor (HP): 10 HP
Elevating motor (HP): 5 HP
Coolant Equipment (HP): 1/4 HP
Machine height from floor: 151.57" - 157.09"
Measurement (LxWxH): 157.48 x 63" x 151.57"
Net weight (lbs): 24,200
Approximate shipping weight (lbs): 27,500
Capacity Drilling Steel: 3.15"
Capacity Drilling Cast Iron: 3.94"
Capacity Tapping Steel: 2.56"
Capacity Tapping Cast Iron: 2.95"
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by
Sierra Victor Industries
located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
610-B Oak Place
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.