32" (815mm), No. ZR-33C-32, 20-HI, COLD REVERSING, SENDZIMIR MILL (13134) |
|
Stock Code: |
13134 |
Price: | $RFQ |
Subcategory: | Sendzimir Rolling Mills |
Year of Manufacture: |
2014 |
Manufacturer: |
Sendzimir |
Model: |
32" (815MM) |
Condition: | New |
MACHINE# 12523
SPECIFICATIONS:
Manufacturer: Vallourec Babcock (France)
Type: ZR-33C-32 20-HI Cold Reversing Mill
Strip thickness (Mild Steel): 3.0mm ~ 0.03mm (0.120"- 0.012")
Strip width: 315mm ~ 815mm (12.5"- 32")
Maximum coil weight: 10 Ton (22,000 Lbs.)
Line speed: Up to 400m/min. (1312 FPM)
Tension (3 speed): 15.5/13.4/8.5 M Ton (17/14.7/3.3 US Tons)
minimum tension: 400 Kg (880 Lbs.)
Work Roll diameter: 32mm (1.25")
Backup Roll Diameter: 92mm (3.62")
AGC System:
Gauges: Vollmer Contact Gauges
Controls: Siemens S7 PLC
Type: Hydraulic
Filter System: Diatomaceous Earth
Note: Mill Electrical Control System is outdated and must be replaced by
Purchaser.
Motor Drive Data:
Main Drive Motor: 680 KW, 0-560/1300 RPM
- Gearbox Ratio: 1 to 1.532
Right and Left Winders Motors:
Configuration: 2 Motors on Each Winder
Each Winder: 2 x 680 KW, 580 Volts, 1340 Amps
RPM: 0-560/1300 RPM (1 Motor)
0-280/1300 RPM (2 Motors)
Gear Ratio: 4.148 to 1
Winders:
Type: Variable Expansion
Expansion Type: Hydraulic
Expansion Range: 498mm/508mm (19.6/20")
Maximum O.D.: 508mm-1600mm (20"- 63") O.D.
Usage:
The Mill can run different alloys. Specifications above are based on carbon
steel. Mill's last usage was on stainless. Mill ceased operations in 2014.
Mill requires a new electrical control system on drives and PLC to be supplied
by Purchaser.
Quantity of Rolls included (to be verified by Purchaser on inspection):
Type: In use: New: Total:
Backup (with bearings): 16 16
1st Roll: 12 12 24
2nd Roll: 8 8 16
Work Roll: 4 4 8
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
This machine is listed for sale by Machinery International Corp
located in Woodbridge, Connecticut