PHI TUBE FLARING MACHINE |
|
Stock Code: |
18028 |
Price: | $1,950 |
Subcategory: | Tube End Finishing & Chamfering |
Model: |
2CP |
Condition: | Used |
PHI TUBE FLARING MACHINE
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00
HMC Stock No. 18028
Machine Serial No. 94-2-003
Machine Model No. 2CP
New Date: Circa 1994
Made in USA
CAPACITIES:
Flaring: Annealed Ferrous (S.S.): 1/8" to 2" O.D. x .049" WT
Flaring: Nonferrous: 1/8" to 2" O.D. x .065" WT
Beading: Annealed Ferrous & Nonferrous: 1/4" to 3/8" O.D. x .049" WT
Beading: Nonferrous: 7/16" to 1-1/2" O.D. x .065" WT
Beading: Annealed Ferrous: 7/16" to 1-1/2" O.D. x .035 WT
Squaring & Deburring: Annealed Ferrous & Nonferrous: 1/8" to 2" O.D.
Flanging: Ferrous & Nonferrous: 90° Flange 1/2" to 1-1/4" O.D. Tube
Clamping: Automatic Air Cylinder Clamping
Air Supply: 1-1/2 CFM at 75 to 100 PSI Required
Maximum Air Pressure: 120 PSI
EQUIPPED WITH:
(4) Sets of Dies for 1/4", 3/8", 1/2"
(2) 45 Degree Flare Tool Pushers
(1) Instruction Manual
(1) Squaring Tool
Air Activated Jaw Closing
2 Speed Spindle
High Speed for Flare, Square and Burr Nonferrous Tubing
Low Speed for Flare, Square and Burr Annealed Ferrous Tubing
Spindle Speeds: 50 to 1500 RPM
Dies: (2 sets) 1/4": MS33584 / 1/4" OD / 45 Degree, 30-4504; PHI #800001-003
Dies: (1 set) 3/8": MS33584 / 3/8" OD / 45 Degree, 30-4506; PHI #800001-005
Dies: (1 set) 1/2": MS33584 / 1/4" OD / 45 Degree, 30-4508; PHI #800001-007
Unit Mounted on Metal Stand
Stand Size: 24" x 36" x 33" High
Air Regulator Unit
1.2 HP Motor, Wired for 3 Phase, 60 Hz, 220 Volts ONLY, 2.0 Amps
Overall Size on Stand: 37" x 28" x 54" High x Approx. 400 Lbs.
This machine is listed for sale by Hildebrand Machinery Co Inc
located in York, Pennsylvania