Hansvedt CNC RAM EDM Large 20x35 tank 100 AMP Power supply |
|
Price: | $12,995 |
Subcategory: | Conventional EDM - Ram / Sinker CNC |
Power: | 220A |
Table width: | 35" |
Year of Manufacture: |
2005 (estimated) |
Manufacturer: |
Hansvedt |
Model: |
MS70C |
Condition: | Used |
EC EDM & Remedy Machine Sales, LLC. Edward Tremblay, MM
Phone: 215-540-0404 E-mail: [email protected]
Website: RemedyMills.com
These are a copy of the new machine Specifications Dated: 06-2005.
We are now offering this used machine for sale. This machine was taken out of service in 2016 and was in working condition at that time. It is being offered at a very low price and in “AS-IS” condition as is expected to still be in working condition. You can contract Hansvedt EDM to set up this machine for testing before you buy this machine, these costs are separate and additional to the sale price of this machine.
HANSVEDT MODEL MS 70C CNC ELECTRICAL DISCHARGE MACHINE SYSTEM
3 Axis CNC Ram EDM Machine. Hansvedt EDM has been the building of EDM Machine's in Urbana, Illinois.
MACHINE TOOL SPECIFICATIONS
Positioning Table Travel....(XYZ)... 23.6 x 15.7" x 19.7"
XY Positioning Accuracy........ +/ 0.0002"
Worktable Size.................... 35" x 19.7"
Worktank Size...................... 55" x 31" x 22"
Chuck to Table Distance......... 31" Max., 12" min.
CNC Infeed Movement........... 0.0001"/Div.
Platen Size......................... 6 x 6" and has 3R Macro Chuck
Maximum Worktable Weight... 6100 lbs.
CNC Servo Controls............Manual, Edge finder, Auto Retract, Orbit Stop,
Servo Speed, Gap Adjust
Machining Axes.... X,Y and Z, All 3 Axes Simultaneously 3 Linear, 2 circular
Orbiting..... Round, Square, Vector, and Shapes.
CNC Control:
Powerful and Easy to Use Menu Driven Control. Easy to use "Quick Cut" Mode for simple one of a kind cavities.
Memory Capacity....... 2 GB
Controlled Axes......... X,Y, and Z Simultaneous
Orbit Modes Programmable..... Square, Vector, Circular (6" Max.)
CRT Display........ 14" Color
CNC Programming Codes...... Start, Linear, Rapid, Orbit, Dwell, Index, Trace
(Easy to Use English Codes) Power Supply Setting, Offset, Rotate,
Servo Controls Automatic:... Edge Find, Hole Center, Jog, Dry Run,
XYZ Home, Servo Speed, Gap Spacing.
Jog Speed....... 8.5 IPM Table, and 40 IPM Ram
Automatic Power Recovery....Yes
XYZ Axes ....... Programmable 0.0001 inch
Digital Axis Display... 1/2 Inch Characters, 0.0001 resolution
Input....... Manual data input (MDI), data cable (RS232), 3.5" Disk Drive
Output....... RS 232 and 3.5" Disk Drive
Power Supply
Hansvedt has Developed a Unique New "High Efficiency" Power Supply, which Machines Faster, Better, and More Economically than others designed by Hansvedt before.
Max. Average Current..(Booster).... 100 amps
M Pulse and V Pulse Generator... No Wear and Fast Finishing Operations
EDM Controls.... Arc duration, % On Time, Peak Current, Current Cut Off,
Sensitivity, Generator Type, Electrode Polarity, Electrode Material,
DC Arc Protection, Servo Speed, Gap Spacing, and Capacitor Mode
Amperage Settings........... 30 Divisions Programmable
Gap Initiation Voltage..... 50 volts
Arc Duration Range On Time... 1 to 1800 microseconds
% On Time (Off Time)...... 0.5 to 2,000,000 microseconds
Dielectric System:
Worktank Capacity........ 38 Gallons estimated
Reservoir Capacity......... 250 Gallons
Flushing Pressure........... 0 50 PSI
Vacuum (Optional).........0 15 in/Hg
Filtration............ 5 Micron Replaceable (2) Cartridge Elements
General:
Footprint Required (HxWxD).... 83 x 76 x 84
Net Weight............................... 7800 Lbs.
Option Items are additional to the machine purchase price:
These are purchased from other venders at your request :
4) 55 Gallon drums of EDM Oil delivered to your facility…………… $ P.O.R.
This is determined by the oil type requested, and your location
We recommend and can provide Hangstfers EDM Oils
1) Hansvedt Installation at your facility - - - - - Price quoted to your location
1) Hansvedt Training of the machine - - - - - Price quoted to your location
1) Rigging to your shop by ECEDM - PA Local only …………….. $ 225.00 p/hour
1) Building Shipping skids (3) for shipment to any area………… $ 1,900.00
Any USA shipping location – the items must be properly skidded for
shipment. Truckers will not accept this machine tool for shipment if it is
not skidded. The power supply will be plastic wrapped and the machine
tool will have padding and plastic wrap.
1) Loading onto your truck or shipping agent………… No Charge at ECEDM
We will properly load the machine
This machine is listed for sale by
located in Levittown, Pennsylvania